Check precision and preload
After the profile rail guide is selected based on the requirements and loads, a final check of the precision and preload is required. This is the only way to ensure that the rails and carriages provide the required accuracy and performance in the selected configuration.
The rail and carriage constellation must ensure that the required precision is achieved for the specific application. User must determine whether the selected combination of components meets the desired accuracy classes. For example, applications with high precision requirements may require particularly tightly tolerated rails and trolleys.
The preload also plays a central role here. In order to obtain a preload, the rolling elements installed in the guide carriage are selected larger than would strictly be required by the spacing between the guide carriage and the profile rail. The oversized rolling elements are compressed to the clear distance between the guide carriage and the profile rail and are elastically deformed. They are preloaded.
The rail and carriage constellation must ensure that the required precision is achieved for the specific application. User must determine whether the selected combination of components meets the desired accuracy classes. For example, applications with high precision requirements may require particularly tightly tolerated rails and trolleys. The preload also plays a central role here. Insufficient preload can lead to unwanted play and limited precision, while excessive preload increases rolling resistance and negatively affects service life. The selected preload should therefore match the application and also the desired precision.
Another step is to check the dimensional tolerances of the rail and carriage. Standardized tolerance classes specify which accuracy in terms of straightness, parallelism and surface finish must be maintained. The rail should be checked for deviations prior to installation and start-up. Metrology equipment, such as micrometers, height gauges, or laser systems can be used to ensure that the rail meets specified tolerances.