Corrosion and erosion protection
There are various types of corrosion and erosion protection. The basic principle is that properties are added to the material to be protected in order to make it more resistant to erosion and/or corrosion. This also extends the service life. However, additional erosion protection is often more expensive than simply replacing the component and must therefore be considered carefully. Erosion protection and corrosion protection can both be categorized into passive and active erosion or corrosion protection.
Passive corrosion protection is achieved, for example, by corrosion protection agents that protect the metal surfaces as a coating. A protective coating is often applied as a final operation. Common methods include thermal spraying and polymer coating:
- Thermal spraying: Thermal spraying involves spraying additive materials onto the surface as spray particles, which are then deposited on the surface in layers to form the spray layer. The main application for thermal spraying is corrosion and wear protection. The thermal load of this method is very low. Arc spraying, plasma spraying and flame spraying are subtypes.
- Polymer coating: Polymer coating involves coating the tool with a layer of polymeric material. Tribological polymer coatings are particularly adaptable. They reduce abrasion and are also used as protection against corrosion and wear. The following options are available: Powder coating, plasma coating for very thin coatings, wet coating, vacuum coating.
Active corrosion protection is mainly used on inaccessible workpieces, e.g. submerged or underground cables or pipes. Active corrosion protection can be achieved by adding a corrosion inhibitor or by electrochemical polarization. A distinction is made between anodic and cathodic protection:
- Cathodic: the metal to be protected is connected as a cathode with a positively charged anode (e.g. a non-royal metal, such as zinc) by means of external current. External current sources can even be omitted when magnesium is used as an anode. The electrodes are directed toward the material to be protected and are absorbed by the latter. A protective current is created that prevents rusting.
- Anodic: on metals that generate corrosion or oxidation products, these products are used as a protective layer to prevent further attack.