| Is relatively movable |
Clearance fit |
Loose fit tolerance |
|
|
|
c9 |
Part with space for a wide gap or movable part that requires a gap. Part for utilization with a large gap to facilitate assembly. Part for which an appropriate gap is required even at high temperatures. |
Part the structure of which requires a gap. (Blows up. Large position error fit tolerance is too long.) Costs need to be reduced. (manufacturing costs, maintenance costs) |
Piston ring and ring groove Connection via a loose grub screw. |
| Slight rolling fit tolerance |
|
|
d9 |
d9 |
Part for utilization with a gap or part that requires a gap. |
Crank web and connecting rod bearing (side) Exhaust valve box and sliding part of a spring bearing Piston ring and ring groove |
| |
e7 |
e8 |
e9 |
Part for utilization with a large gap or part that needs a gap. Relatively large gap, well-lubricated bearing. High-temperature, high speed of rotation, and heavy-duty bearings (high-quality circulating pressure lubrication). |
Regular rotation or sliding element (Must be well lubricated.)
Regular connection (separates often) |
Connection of the exhaust valve box Main bearing for crankshaft Regular sliding element |
| Rolling fit tolerance |
f6 |
f7 |
f7 f8 |
|
Fit tolerance that allows for a gap for movements (high-quality fit tolerance). Regular bearing for normal temperatures, greased or oil lubricated. |
Part with inserted cooled exhaust valve. Regular shaft and bushing Lever and bushing for connecting device |
| Fine rolling fit tolerance |
g5 |
g6 |
|
|
Continuously rotating part of a precision machine under low load. With a narrow gap to allow movement (tappets and positioning). Precision sliding element. |
Part required for precise movement, virtually without play. |
Lever and pin for connecting device Parallel key and groove Precision control valve rod |
| Is not relatively movable |
Transition tolerance |
Sliding fit tolerance |
h5 |
h6 |
h7 h8 |
h9 |
Fit tolerance that allows hand movement when lubricant is applied (high-quality positioning) Special precision sliding element Unimportant static part |
Can be disassembled and assembled without damaging components. |
Force will not be transmitted solely via the fitting force or connecting force alone. |
Connection of the crown and hub to one another Connection of the wheel of a gear |
| Sliding adjustment |
h5 h6 |
js6 |
|
|
Connection for utilization with a slight gap. Precision connection that locks both parts while the fixture is in use. Connection that can be assembled and disassembled with a wood or lead hammer. |
Connect the coupling flanges control path and pin
Connect gear ring and hub |
| Press fit tolerance |
js5 |
k6 |
|
|
Fit tolerance that requires an iron hammer or hand press for assembly and disassembly (a parallel key or similar is required to prevent rotation of the shaft). Precision positioning. |
Connect the shaft of a gear pump and a housing
Shoulder bolts |
| k5 |
m6 |
|
|
Same as above for assembly and disassembly. Precision positioning without gap. |
Shoulder bolts
Connect the piston of the hydraulic equipment and a shaft. Connect the coupling flange and the shaft together |
| Easy press fit tolerance |
m5 |
n6 |
|
|
Connection requiring considerable force for assembly and disassembly. Stationary precision fit tolerance (a parallel key or similar is required to transmit high torque) |
A small force can be transmitted via the fitting force alone. |
Flexible coupling and gear shaft (passive side) precision connection
Insertion of a suction valve and a valve guide |
| Interference tolerance |
Press fit tolerance |
n5 n6 |
p6 |
|
|
Connection that requires high force for assembly and disassembly (a parallel key or similar is required for high torque transmission). A slight press fit or similar is required for components made of NE metals. A standard press fit is required for iron components, bronze parts and copper parts. |
Difficult to disassemble without damaging part. |
Insert a suction valve and a valve guide, connect the gear and shaft together (low torque)
Shaft of a flexible coupling and a gear (drive end) |
| p5 |
r6 |
|
|
Same as above for assembly and disassembly. Large components require a shrink press connection, cold press connection, or forced press connection. |
Coupling and shaft |
| Strong press fit tolerance, shrink fit tolerance, cold fit tolerance |
A considerable force can be transmitted a connecting force alone. |
| r5 |
s6 t6 u6 x6 |
|
|
Tightly coupled and a shrink press connection, cold press connection or forced press connection is required. Permanently assembled assembly group that cannot be disassembled. A press fit or similar is required for light metal elements. |
Install and fasten a bearing bushing |
Insertion of a suction valve and a valve box Connect the coupling flange and the shaft together (high torque) |
Connect the crown of a drive pulley and a hub Install and fasten a bearing bushing |