Core pins / head shape selectable / tool steel / nitrided / machined end face
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Head thickness | Shaft diameter tolerance | D/P (Shaft diameter) (mm) | Tip shape | C (C chamfering width on the tip) (mm) | K (Taper angle) (°) | L (L dimension) (mm) | R (Tip R chamfering) (mm) | S (Tip tapered width) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 4 | C | 0.1 ～ 1.9 | - | 50 ～ 500 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 4.5 | C | 0.1 ～ 2.1 | - | 50 ～ 500 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 5 | C | 0.1 ～ 2.4 | - | 50 ～ 500 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 5.5 | C | 0.1 ～ 2.6 | - | 50 ～ 500 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 (Reference tolerance) | 6 | C | 0.1 ～ 2.9 | - | 50 ～ 600 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 (Reference tolerance) | 6.5 | C | 0.1 ～ 3.1 | - | 50 ～ 600 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 (Reference tolerance) | 7 | C | 0.1 ～ 3.4 | - | 50 ～ 600 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 (Reference tolerance) | 8 | C | 0.1 ～ 3.9 | - | 50 ～ 600 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 (Reference tolerance) | 10 | C | 0.1 ～ 4.9 | - | 50 ～ 600 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 (Reference tolerance) | 12 | C | 0.1 ～ 5.9 | - | 50 ～ 700 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 (Reference tolerance) | 15 | C | 0.1 ～ 7.4 | - | 50 ～ 700 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 (Reference tolerance) | 16 | C | 0.1 ～ 7.9 | - | 50 ～ 700 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 1.5 | C | 0.1 ～ 0.9 | - | 50 ～ 250 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 2 | C | 0.1 ～ 0.9 | - | 50 ～ 400 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 2.5 | C | 0.1 ～ 1.1 | - | 50 ～ 400 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 3 | C | 0.1 ～ 1.4 | - | 50 ～ 400 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 3.5 | C | 0.1 ～ 1.6 | - | 50 ～ 400 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 4 | C | 0.1 ～ 1.9 | - | 50 ～ 400 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 4.5 | C | 0.1 ～ 2.1 | - | 50 ～ 400 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 5 | C | 0.1 ～ 2.4 | - | 50 ～ 500 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 5.5 | C | 0.1 ～ 2.6 | - | 50 ～ 500 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 (Reference tolerance) | 6 | C | 0.1 ～ 2.9 | - | 50 ～ 500 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 (Reference tolerance) | 6.5 | C | 0.1 ～ 3.1 | - | 50 ～ 500 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 (Reference tolerance) | 7 | C | 0.1 ～ 3.4 | - | 50 ～ 500 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 (Reference tolerance) | 8 | C | 0.1 ～ 3.9 | - | 50 ～ 500 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 (Reference tolerance) | 10 | C | 0.1 ～ 4.9 | - | 50 ～ 500 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 (Reference tolerance) | 12 | C | 0.1 ～ 5.9 | - | 50 ～ 500 | - | - |
Loading...
Basic information
| Material | SKD61 | Surface treatment | Nitrided | With/without cooling hole | No |
|---|---|---|---|---|---|
| Applicable ejector sleeves inner diameter tolerance | +0.01/0 or H7 |
Configure
Basic Attributes
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
Shaft diameter tolerance
- -0.01/-0.02
- -0.01/-0.02 (Reference tolerance)
-
D/P (Shaft diameter)(mm)
-
C (C chamfering width on the tip)(mm)
-
K (Taper angle)(°)
-
L (L dimension)(mm)
-
R (Tip R chamfering)(mm)
-
S (Tip tapered width)(mm)
-
Type
- CPJ-5LB
- CPJ-5LC
- CPJ-5LG
- CPJ-5LR
- CPJ-5LT
- CPN-5LB
- CPN-5LC
- CPN-5LG
- CPN-5LR
- CPN-5LT
-
Tip shape
- C
- G
- T
- R
- B
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.