Core pins / cylindrical / with head / HSS / D, L 0.01mm / front side recessed engraved / inscription selectable
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Shaft diameter tolerance | D/P (Shaft diameter) (mm) | Number of engraving characters | No. (Nominal diameter) (mm) | L (L dimension) (mm) | Engraving character designation | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | 0/-0.005 | 1.8 | 4 characters | - | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 1.9 | 4 characters | - | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 2 | 4 characters | - | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 2.5 | 4 characters | - | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 3 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 3.5 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 4 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 4.5 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 5 | 4 characters | - | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 5.5 | 4 characters | - | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 6 | 4 characters | - | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 6.5 | 4 characters | - | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 7 | 4 characters | - | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 8 | 4 characters | - | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 10 | 4 characters | - | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 1.8 ～ 1.99 | 4 characters | 2 | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 2 ～ 2.49 | 4 characters | 2.5 | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 2.5 ～ 2.99 | 4 characters | 3 | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 3 ～ 3.49 | 4 characters | 3.5 | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 3.5 ～ 3.99 | 4 characters | 4 | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 4 ～ 4.49 | 4 characters | 4.5 | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 4.5 ～ 4.99 | 4 characters | 5 | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 5 ～ 5.49 | 4 characters | 5.5 | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 5.5 ～ 5.99 | 4 characters | 6 | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 6 ～ 6.49 | 4 characters | 6.5 | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 6.5 ～ 6.99 | 4 characters | 7 | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 7 ～ 7.99 | 4 characters | 8 | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | 0/-0.005 | 8 ～ 9.99 | 4 characters | 10 | 10 ～ 150 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 1.8 | 4 characters | - | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 1.9 | 4 characters | - | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 2 | 4 characters | - | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 2.5 | 4 characters | - | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 3 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 3.5 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 4 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 4.5 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 5 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 5.5 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 6 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 6.5 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 7 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 8 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 10 | 4 characters | - | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 1.8 ～ 1.99 | 4 characters | 2 | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 2 ～ 2.49 | 4 characters | 2.5 | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 2.5 ～ 2.99 | 4 characters | 3 | 10 ～ 100 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 3 ～ 3.49 | 4 characters | 3.5 | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 3.5 ～ 3.99 | 4 characters | 4 | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 4 ～ 4.49 | 4 characters | 4.5 | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 4.5 ～ 4.99 | 4 characters | 5 | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 5 ～ 5.49 | 4 characters | 5.5 | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 5.5 ～ 5.99 | 4 characters | 6 | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 6 ～ 6.49 | 4 characters | 6.5 | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 6.5 ～ 6.99 | 4 characters | 7 | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 7 ～ 7.99 | 4 characters | 8 | 10 ～ 120 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 8 ～ 9.99 | 4 characters | 10 | 10 ～ 120 | ※Designation by WOS |
Loading...
Basic information
| Shape type | With engraving | Material | SKH51 | Quenching | Hardening steel |
|---|---|---|---|---|---|
| L dimension tolerance | +0.02/0 | Head thickness | 4mm(T4) | Tip shape | No |
| Gas release shape | No | Character engraving type | Concave character |
Configure
Basic Attributes
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
D/P (Shaft diameter)(mm)
[1.8-9.99/0.01mm Unit(s)]
-
No. (Nominal diameter)(mm)
-
L (L dimension)(mm)
-
Engraving character designation
- ※Designation by WOS
-
Type
- CPH1M
- CPH2M
- CPH3M
- CPH4M
- CPH5M
- CPHB1M
- CPHB2M
- CPHB3M
- CPHB4M
- CPHB5M
- CPX1M
- CPX2M
- CPX3M
- CPX4M
- CPX5M
- CPXB1M
- CPXB2M
- CPXB3M
- CPXB4M
- CPXB5M
-
Number of engraving characters
- 1 characters
- 2 characters
- 3 characters
- 4 characters
- 5 characters
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.