Manufacturer part number: PTBN780-UP5M-100
Brand: MISUMI
Price: 27.34 €
Delivery time: 9 Days
Belt Type: UP5M
Belt Width (mm): 10 mm
Belt-shaped type: Circular Tooth Profile Ultra PX Belt
Circumference Length: 780 mm
Number of Teeth: 156 Teeth
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
PTBN780-UP5M-100
Back to the Category Timing Belt
Available dimensions and tolerances can be found under the tab More information.
Type | Material | |
HTBN | Rubber | High Hardness Synthetic Rubber: Hardness 88° |
Core Wire | Glass Core Wire | |
Cloth | Nylon Cloth |
Type | Material | |
PTBN | Rubber | Chloroprene Rubber |
Core Wire | Glass Core Wire | |
Cloth | Nylon Cloth |
Further specifications can be found under the tab More information.
Part Number | ||||
Type | Belt Number | Belt Nominal Width | ||
HTBN PTBN | 1800-MTS8M 960-UP8M | - 400 - 250 |
- Material: chloroprene rubber (neoprene), polyurethane (PU)
- Tension cord: glass fibre, aramid fibre, steel
- Width (mm): 1 to 101.6
- Width (in.): 0.19 to 4
- Profile (metric): T5, T10, AT5, AT10, S2M, S3M, S5M, S8M, S14M, MTS8M, EV5GT, EV8YU, 2GT, 3GT, MA3, MA5, MA8, P2M, P3M, P5M, P8M, UP5M, UP8M
- Profile (in.): MXL, XL, L, H
Timing belts for mechanical engineering are intended for force and power transmission. Depending on the interlocking of the profile, they can alternatively be used for the material flow (transportation) or for positioning.
Timing belts are more maintenance-friendly, efficient and durable compared to roller chains.
Timing belts can be used in many ways. The belt profile that suits your application depends on the task of the timing belt. MISUMI offers a suitable belt profile for almost every type of application.
An overview of the profile forms by application type can be found in the PDF Overview.
The amount of transmission power depends on many factors. The exact maximum load must be considered and calculated individually according to the application. The calculation for timing belts can be found in the selection of Timing Belts as PDF.
In order not to fall below the minimum number of teeth, the minimum size of the timing pulleys should be considered individually.
In general, a timing belt should be provided with the appropriate pretension to maximize the service life of the timing belt. If the pretension is too low, a jump (slip) can cause wear of the timing belt.
Application example: workpiece carrier
(1) Stopper bolt with rubber, (2) belt conveyor, (3) workpiece carrier
Application example: of toothed belt drives
(1) Toothed belt, (2) driven Timing pulleys with crimp disc, (3) idler pulley with crimp disc, (4) driving Timing pulleys with crimp disc
Application example: Timing belt
(1) Linear guide, (2) mounting plate, (3) Timing belt, (4) Screw-on terminal
Application example: Timing belt
(1) Bolt-on terminal, (2) Timing belt, (3) Linear shaft, (4) Linear bushings
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
PTBN780-UP5M-100 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Belt Type | Belt Width (mm) (mm) | Belt-shaped type | Circumference Length (mm) | Number of Teeth (Teeth) | |
---|---|---|---|---|---|---|---|---|---|---|
27.34 € | 1 | 9 Days | 10 | UP5M | 10 | Circular Tooth Profile Ultra PX Belt | 780 | 156 |
Loading...
Back to the Category Timing Belt
Type | Pitch | l | H | h | i | PLD | Unit Mass g/m (Width: 10mm) |
MTS8M | 8 | 5.2 | 5.3 | 3.05 | 2.25 | 0.686 | 45.0 |
Type | Pitch | l | H | h | i | PLD | Unit Mass g/m (Width: 10mm) |
UP5M | 5 | 3.25 | 3.60 | 1.81 | 1.79 | 0.571 | 41.0 |
UP8M | 8 | 5.2 | 5.20 | 2.90 | 2.30 | 0.686 | 50.8 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | |||||
Type | Belt Number | Belt Nominal Width | Belt Nominal Width | |||||
150 | 250 | 300 | 400 | |||||
HTBN (Rubber) | 528-MTS8M | 150 (15mm) 250 (25mm) 300 (30mm) 400 (40mm) | 66 | 528 | ||||
560-MTS8M | 70 | 560 | ||||||
584-MTS8M | 73 | 584 | ||||||
600-MTS8M | 75 | 600 | ||||||
632-MTS8M | 79 | 632 | ||||||
640-MTS8M | 80 | 640 | ||||||
656-MTS8M | 82 | 656 | ||||||
712-MTS8M | 89 | 712 | ||||||
720-MTS8M | 90 | 720 | ||||||
760-MTS8M | 95 | 760 | ||||||
800-MTS8M | 100 | 800 | ||||||
824-MTS8M | 103 | 824 | ||||||
848-MTS8M | 106 | 848 | ||||||
856-MTS8M | 107 | 856 | ||||||
880-MTS8M | 110 | 880 | ||||||
896-MTS8M | 112 | 896 | ||||||
920-MTS8M | 115 | 920 | ||||||
928-MTS8M | 116 | 928 | ||||||
944-MTS8M | 118 | 944 | ||||||
960-MTS8M | 120 | 960 | ||||||
976-MTS8M | 122 | 976 | ||||||
1000-MTS8M | 125 | 1000 | ||||||
1024-MTS8M | 128 | 1024 | ||||||
1056-MTS8M | 132 | 1056 | ||||||
1080-MTS8M | 135 | 1080 | ||||||
1120-MTS8M | 140 | 1120 | ||||||
1152-MTS8M | 144 | 1152 | ||||||
1160-MTS8M | 145 | 1160 | ||||||
1200-MTS8M | 150 | 1200 | ||||||
1216-MTS8M | 152 | 1216 | ||||||
1248-MTS8M | 156 | 1248 | ||||||
1280-MTS8M | 160 | 1280 | ||||||
1304-MTS8M | 163 | 1304 | ||||||
1320-MTS8M | 165 | 1320 | ||||||
1352-MTS8M | 169 | 1352 | ||||||
1360-MTS8M | 170 | 1360 | ||||||
1400-MTS8M | 175 | 1400 | ||||||
1480-MTS8M | 185 | 1480 | ||||||
1520-MTS8M | 190 | 1520 | ||||||
1600-MTS8M | 200 | 1600 | ||||||
1640-MTS8M | 205 | 1640 | ||||||
1680-MTS8M | 210 | 1680 | ||||||
1760-MTS8M | 220 | 1760 | ||||||
1800-MTS8M | 225 | 1800 | ||||||
1880-MTS8M | 235 | 1880 | ||||||
1960-MTS8M | 245 | 1960 | ||||||
2000-MTS8M | 250 | 2000 | ||||||
2064-MTS8M | 258 | 2064 | ||||||
2400-MTS8M | 300 | 2400 | ||||||
2600-MTS8M | 325 | 2600 | ||||||
2800-MTS8M | 350 | 2800 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price 1 ~ 4 pc(s). | |||
Type | Belt Number | Belt Nominal Width | Belt Nominal Width | |||
100 | 150 | |||||
PTBN (Rubber) | 215-UP5M | 100 (10mm) 150 (15mm) | 43 | 215 | ||
225-UP5M | 45 | 225 | ||||
255-UP5M | 51 | 255 | ||||
260-UP5M | 52 | 260 | ||||
275-UP5M | 55 | 275 | ||||
295-UP5M | 59 | 295 | ||||
300-UP5M | 60 | 300 | ||||
310-UP5M | 62 | 310 | ||||
320-UP5M | 64 | 320 | ||||
325-UP5M | 65 | 325 | ||||
340-UP5M | 68 | 340 | ||||
350-UP5M | 70 | 350 | ||||
370-UP5M | 74 | 370 | ||||
375-UP5M | 75 | 375 | ||||
400-UP5M | 80 | 400 | ||||
420-UP5M | 84 | 420 | ||||
425-UP5M | 85 | 425 | ||||
430-UP5M | 86 | 430 | ||||
440-UP5M | 88 | 440 | ||||
450-UP5M | 90 | 450 | ||||
475-UP5M | 95 | 475 | ||||
490-UP5M | 98 | 490 | ||||
500-UP5M | 100 | 500 | ||||
515-UP5M | 103 | 515 | ||||
520-UP5M | 104 | 520 | ||||
525-UP5M | 105 | 525 | ||||
530-UP5M | 106 | 530 | ||||
550-UP5M | 110 | 550 | ||||
560-UP5M | 112 | 560 | ||||
575-UP5M | 115 | 575 | ||||
595-UP5M | 119 | 595 | ||||
600-UP5M | 120 | 600 | ||||
605-UP5M | 121 | 605 | ||||
635-UP5M | 127 | 635 | ||||
650-UP5M | 130 | 650 | ||||
670-UP5M | 134 | 670 | ||||
675-UP5M | 135 | 675 | ||||
690-UP5M | 138 | 690 | ||||
725-UP5M | 145 | 725 | ||||
740-UP5M | 148 | 740 | ||||
750-UP5M | 150 | 750 | ||||
780-UP5M | 156 | 780 | ||||
800-UP5M | 160 | 800 | ||||
835-UP5M | 167 | 835 | ||||
850-UP5M | 170 | 850 | ||||
900-UP5M | 180 | 900 | ||||
1000-UP5M | 200 | 1000 | ||||
1050-UP5M | 210 | 1050 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price 1 ~ 4 pc(s). | |||
Type | Belt Number | Belt Nominal Width | Belt Nominal Width | |||
150 | 250 | |||||
PTBN (Rubber) | 480-UP8M | 150 (15mm) 250 (25mm) | 60 | 480 | ||
512-UP8M | 64 | 512 | ||||
520-UP8M | 65 | 520 | ||||
536-UP8M | 67 | 536 | ||||
560-UP8M | 70 | 560 | ||||
584-UP8M | 73 | 584 | ||||
600-UP8M | 75 | 600 | ||||
632-UP8M | 79 | 632 | ||||
640-UP8M | 80 | 640 | ||||
680-UP8M | 85 | 680 | ||||
712-UP8M | 89 | 712 | ||||
720-UP8M | 90 | 720 | ||||
760-UP8M | 95 | 760 | ||||
800-UP8M | 100 | 800 | ||||
832-UP8M | 104 | 832 | ||||
840-UP8M | 105 | 840 | ||||
856-UP8M | 107 | 856 | ||||
880-UP8M | 110 | 880 | ||||
960-UP8M | 120 | 960 | ||||
1040-UP8M | 130 | 1040 | ||||
1080-UP8M | 135 | 1080 |
Belt shape | Closed End | Belt tooth surface | Standard (Single Sided) | Belt material | Rubber Belt |
---|---|---|---|---|---|
Core Wire Material | Glass Core Wire | Transmission torque | High Torque Transmission |
This page is Timing belts / MTS8M, UP5M, UP8M / CR, synthetic rubber / glass fibre, part number PTBN780-UP5M-100.
You can find the detail information about specifications and dimensions on part number PTBN780-UP5M-100.
Configure
Basic Attributes
Type
Belt Type
Belt Width (mm)(mm)
Belt-shaped type
Circumference Length(mm)
Number of Teeth(Teeth)
Filter by CAD data type
Filter by standard shipping days
Optional Attributes
Where does the idler pulleys have to be placed on the timing belt?
As a rule, the idler pulleys are positioned on the slack side, since the tension of the timing belt is here lowest during operation. Ideally, the timing belt is tensioned from the inside, because this prevents the timing belt from bending alternately. This is particularly recommended for timing belts with a steel tension cord. The idler pulley should always be larger than the smallest timing pulley of the belt drive system.
For what purpose can a timing belt with a round profile be used for?
Round profile timing belts can be used in many applications. These are well suited for transmitting torque. In addition, the reverse play is very low due to the round profile shape with changing direction of rotation. The timing belts are also well suited for highly precise positioning. Timing belts with a round tooth profile can therefore often be found in 3D printers.
Can multiple belts be used for the transfer?
A transmission can take place via one or more timing belts. If an equal distribution of the forces across the individual belts is not possible, it must be ensured that one belt alone can withstand the maximum load. In order to enable uniform distribution of forces, a precise adjustment is necessary. For this purpose, a toothed belt disc with clamping sleeve can be used, because it can be adjusted continuously and ensure uniform distribution.
Can a timing belt used for transmission?
With timing belts, a gear ratio or reduction in a drive is possible. The gear ratio is established based on the number of teeth on the pulleys. It should be ensured that the minimum number of teeth of the timing pulley disc is not undercut.
What is the possible tensile stress for timing belts?
The maximum allowable tension for MISUMI timing belts depends on the belt type, speed of rotation and belt pulley diameter. For more information, click on this link.
What is the minimum size of timing pulleys?
The minimum size or the minimum number of teeth of a timing pulley depends on the belt type used and the height of the applied speed or rotation. You can find more detailed information about the minimum number of teeth of timing pulley discs in the selection of Timing Pulleys available as a PDF.
Does a timing belt stretch a lot?
As opposed to a roller chain, the expansion is small. The length extension of timing belts is very stable. Therefore, it is not absolutely necessary to re-tension the timing belt during operation, as is necessary for chain drives. This makes the timing belt very easy to maintain compared to the chain. However, it should be ensured that the timing belt is free of oil, as the natural rubber could swell.
What is the purpose of a timing belt?
The primary task of a timing belt is the synchronous and slip-free transmission of force or power. Depending on the task, various profile shapes are available for timing belts. These can be roughly divided into drive, conveying and positioning. In the following overview, you can view the various areas of use: Overview as PDF
Part Number |
---|
HTBN1000-MTS8M-400 |
HTBN1024-MTS8M-150 |
HTBN1024-MTS8M-250 |
PTBN780-UP5M-150 |
PTBN800-UP5M-100 |
PTBN800-UP5M-150 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | RoHS | Belt Type | Belt Width (mm) (mm) | Belt-shaped type | Circumference Length (mm) | Number of Teeth (Teeth) |
---|---|---|---|---|---|---|---|---|---|---|
157.91 € | 1 | Available | 9 Days | 10 | MTS8M | 40 | Round Tooth Profile Mega Torque | 1000 | 125 | |
60.86 € | 1 | Available | 9 Days | 10 | MTS8M | 15 | Round Tooth Profile Mega Torque | 1024 | 128 | |
100.97 € | 1 | Available | 9 Days | 10 | MTS8M | 25 | Round Tooth Profile Mega Torque | 1024 | 128 | |
41.25 € | 1 | 9 Days | 10 | UP5M | 15 | Circular Tooth Profile Ultra PX Belt | 780 | 156 | ||
27.57 € | 1 | 9 Days | 10 | UP5M | 10 | Circular Tooth Profile Ultra PX Belt | 800 | 160 | ||
41.38 € | 1 | 9 Days | 10 | UP5M | 15 | Circular Tooth Profile Ultra PX Belt | 800 | 160 |