Manufacturer part number: PTBN416P2M-060
Brand: MISUMI
Price: 6.70 €
Delivery time: 7 Days
Belt Type: P2M
Belt Width (mm): 6 mm
Circumference Length: 416 mm
Number of Teeth: 208 Teeth
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
PTBN416P2M-060
Back to the Category Timing Belt
Available dimensions and tolerances can be found under the tab More information.
Type | Material | |
PTBN | Back Rubber | Chloroprene Rubber |
Tooth Rubber | ||
Core Wire | Glass Fiber | |
Tooth Fabric | Nylon Cloth |
Further specifications can be found under the tab More information.
Part Number | ||||
Type | Belt Number | Belt Nominal Width | ||
PTBN | 200 P2M | - 060 |
- Material: chloroprene rubber (neoprene), polyurethane (PU)
- Tension cord: glass fibre, aramid fibre, steel
- Width (mm): 1 to 101.6
- Width (in.): 0.19 to 4
- Profile (metric): T5, T10, AT5, AT10, S2M, S3M, S5M, S8M, S14M, MTS8M, EV5GT, EV8YU, 2GT, 3GT, MA3, MA5, MA8, P2M, P3M, P5M, P8M, UP5M, UP8M
- Profile (in.): MXL, XL, L, H
Timing belts for mechanical engineering are intended for force and power transmission. Depending on the interlocking of the profile, they can alternatively be used for the material flow (transportation) or for positioning.
Timing belts are more maintenance-friendly, efficient and durable compared to roller chains.
Timing belts can be used in many ways. The belt profile that suits your application depends on the task of the timing belt. MISUMI offers a suitable belt profile for almost every type of application.
An overview of the profile forms by application type can be found in the PDF Overview.
The amount of transmission power depends on many factors. The exact maximum load must be considered and calculated individually according to the application. The calculation for timing belts can be found in the selection of Timing Belts as PDF.
In order not to fall below the minimum number of teeth, the minimum size of the timing pulleys should be considered individually.
In general, a timing belt should be provided with the appropriate pretension to maximize the service life of the timing belt. If the pretension is too low, a jump (slip) can cause wear of the timing belt.
Application example: workpiece carrier
(1) Stopper bolt with rubber, (2) belt conveyor, (3) workpiece carrier
Application example: of toothed belt drives
(1) Toothed belt, (2) driven Timing pulleys with crimp disc, (3) idler pulley with crimp disc, (4) driving Timing pulleys with crimp disc
Application example: Timing belt
(1) Linear guide, (2) mounting plate, (3) Timing belt, (4) Screw-on terminal
Application example: Timing belt
(1) Bolt-on terminal, (2) Timing belt, (3) Linear shaft, (4) Linear bushings
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
PTBN416P2M-060 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Belt Type | Belt Width (mm) (mm) | Circumference Length (mm) | Number of Teeth (Teeth) | |
---|---|---|---|---|---|---|---|---|---|
6.70 € | 1 | Available | 7 Days | 10 | P2M | 6 | 416 | 208 |
Loading...
Back to the Category Timing Belt
Type | Pitch | L | H | h | PLD | r | Unit Mass g/m (Width: 10mm) |
P2M | 2 | 1.30 | 1.3 | 0.73 | 0.254 | 0.2 | 14.0 |
P3M | 3 | 1.95 | 2.1 | 1.09 | 0.381 | 0.3 | 22.0 |
P5M | 5 | 3.25 | 3.6 | 1.81 | 0.571 | 0.5 | 41.0 |
P8M | 8 | 5.20 | 5.5 | 2.90 | 0.686 | 0.8 | 56.0 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | ||
Type | Belt Number | Nominal Width | Nominal Width | ||
060 | |||||
PTBN | 80 P2M | 060 (6mm) | 40 | 80 | |
84 P2M | 42 | 84 | |||
88 P2M | 44 | 88 | |||
98 P2M | 49 | 98 | |||
100 P2M | 50 | 100 | |||
112 P2M | 56 | 112 | |||
116 P2M | 58 | 116 | |||
118 P2M | 59 | 118 | |||
124 P2M | 62 | 124 | |||
126 P2M | 63 | 126 | |||
132 P2M | 66 | 132 | |||
134 P2M | 67 | 134 | |||
136 P2M | 68 | 136 | |||
140 P2M | 70 | 140 | |||
142 P2M | 71 | 142 | |||
144 P2M | 72 | 144 | |||
146 P2M | 73 | 146 | |||
152 P2M | 76 | 152 | |||
154 P2M | 77 | 154 | |||
160 P2M | 80 | 160 | |||
162 P2M | 81 | 162 | |||
166 P2M | 83 | 166 | |||
170 P2M | 85 | 170 | |||
172 P2M | 86 | 172 | |||
176 P2M | 88 | 176 | |||
180 P2M | 90 | 180 | |||
186 P2M | 93 | 186 | |||
190 P2M | 95 | 190 | |||
196 P2M | 98 | 196 | |||
200 P2M | 100 | 200 | |||
204 P2M | 102 | 204 | |||
208 P2M | 104 | 208 | |||
212 P2M | 106 | 212 | |||
214 P2M | 107 | 214 | |||
216 P2M | 108 | 216 | |||
220 P2M | 110 | 220 | |||
224 P2M | 112 | 224 | |||
230 P2M | 115 | 230 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | ||
Type | Belt Number | Nominal Width | Nominal Width | ||
060 | |||||
PTBN | 234 P2M | 060 (6mm) | 117 | 234 | |
236 P2M | 118 | 236 | |||
240 P2M | 120 | 240 | |||
244 P2M | 122 | 244 | |||
246 P2M | 123 | 246 | |||
250 P2M | 125 | 250 | |||
258 P2M | 129 | 258 | |||
262 P2M | 131 | 262 | |||
266 P2M | 133 | 266 | |||
270 P2M | 135 | 270 | |||
274 P2M | 137 | 274 | |||
280 P2M | 140 | 280 | |||
284 P2M | 142 | 284 | |||
290 P2M | 145 | 290 | |||
300 P2M | 150 | 300 | |||
302 P2M | 151 | 302 | |||
310 P2M | 155 | 310 | |||
318 P2M | 159 | 318 | |||
320 P2M | 160 | 320 | |||
324 P2M | 162 | 324 | |||
328 P2M | 164 | 328 | |||
330 P2M | 165 | 330 | |||
334 P2M | 167 | 334 | |||
340 P2M | 170 | 340 | |||
348 P2M | 174 | 348 | |||
354 P2M | 177 | 354 | |||
360 P2M | 180 | 360 | |||
370 P2M | 185 | 370 | |||
378 P2M | 189 | 378 | |||
380 P2M | 190 | 380 | |||
390 P2M | 195 | 390 | |||
400 P2M | 200 | 400 | |||
408 P2M | 204 | 408 | |||
416 P2M | 208 | 416 | |||
420 P2M | 210 | 420 | |||
424 P2M | 212 | 424 | |||
426 P2M | 213 | 426 | |||
434 P2M | 217 | 434 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | ||
Type | Belt Number | Nominal Width | Nominal Width | ||
060 | |||||
PTBN | 440 P2M | 060 (6mm) | 220 | 440 | |
448 P2M | 224 | 448 | |||
464 P2M | 232 | 464 | |||
488 P2M | 244 | 488 | |||
490 P2M | 245 | 490 | |||
500 P2M | 250 | 500 | |||
516 P2M | 258 | 516 | |||
520 P2M | 260 | 520 | |||
530 P2M | 265 | 530 | |||
560 P2M | 280 | 560 | |||
576 P2M | 288 | 576 | |||
590 P2M | 295 | 590 | |||
600 P2M | 300 | 600 | |||
630 P2M | 315 | 630 | |||
638 P2M | 319 | 638 | |||
656 P2M | 328 | 656 | |||
676 P2M | 338 | 676 | |||
680 P2M | 340 | 680 | |||
704 P2M | 352 | 704 | |||
710 P2M | 355 | 710 | |||
754 P2M | 377 | 754 | |||
764 P2M | 382 | 764 | |||
774 P2M | 387 | 774 | |||
788 P2M | 394 | 788 | |||
800 P2M | 400 | 800 | |||
808 P2M | 404 | 808 | |||
824 P2M | 412 | 824 | |||
846 P2M | 423 | 846 | |||
866 P2M | 433 | 866 | |||
898 P2M | 449 | 898 | |||
900 P2M | 450 | 900 | |||
940 P2M | 470 | 940 | |||
956 P2M | 478 | 956 | |||
992 P2M | 496 | 992 | |||
1040 P2M | 520 | 1040 | |||
1242 P2M | 641 | 1242 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | |||
Type | Belt Number | Nominal Width | Nominal Width | |||
100 | 150 | |||||
PTBN | 120 P3M | 100 (10mm) 150 (15mm) | 40 | 120 | ||
123 P3M | 41 | 123 | ||||
138 P3M | 46 | 138 | ||||
141 P3M | 47 | 141 | ||||
144 P3M | 48 | 144 | ||||
147 P3M | 49 | 147 | ||||
150 P3M | 50 | 150 | ||||
153 P3M | 51 | 153 | ||||
159 P3M | 53 | 159 | ||||
162 P3M | 54 | 162 | ||||
171 P3M | 57 | 171 | ||||
174 P3M | 58 | 174 | ||||
177 P3M | 59 | 177 | ||||
183 P3M | 61 | 183 | ||||
186 P3M | 62 | 186 | ||||
192 P3M | 64 | 192 | ||||
195 P3M | 65 | 195 | ||||
198 P3M | 66 | 198 | ||||
201 P3M | 67 | 201 | ||||
207 P3M | 69 | 207 | ||||
210 P3M | 70 | 210 | ||||
213 P3M | 71 | 213 | ||||
219 P3M | 73 | 219 | ||||
222 P3M | 74 | 222 | ||||
225 P3M | 75 | 225 | ||||
231 P3M | 77 | 231 | ||||
234 P3M | 78 | 234 | ||||
237 P3M | 79 | 237 | ||||
240 P3M | 80 | 240 | ||||
243 P3M | 81 | 243 | ||||
246 P3M | 82 | 246 | ||||
252 P3M | 84 | 252 | ||||
255 P3M | 85 | 255 | ||||
264 P3M | 88 | 264 | ||||
270 P3M | 90 | 270 | ||||
273 P3M | 91 | 273 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | |||
Type | Belt Number | Nominal Width | Nominal Width | |||
100 | 150 | |||||
PTBN | 276 P3M | 100 (10mm) 150 (15mm) | 92 | 276 | ||
279 P3M | 93 | 279 | ||||
285 P3M | 95 | 285 | ||||
288 P3M | 96 | 288 | ||||
291 P3M | 97 | 291 | ||||
294 P3M | 98 | 294 | ||||
300 P3M | 100 | 300 | ||||
303 P3M | 101 | 303 | ||||
306 P3M | 102 | 306 | ||||
309 P3M | 103 | 309 | ||||
312 P3M | 104 | 312 | ||||
318 P3M | 106 | 318 | ||||
330 P3M | 110 | 330 | ||||
339 P3M | 113 | 339 | ||||
345 P3M | 115 | 345 | ||||
354 P3M | 118 | 354 | ||||
360 P3M | 120 | 360 | ||||
363 P3M | 121 | 363 | ||||
369 P3M | 123 | 369 | ||||
372 P3M | 124 | 372 | ||||
384 P3M | 128 | 384 | ||||
387 P3M | 129 | 387 | ||||
393 P3M | 131 | 393 | ||||
399 P3M | 133 | 399 | ||||
402 P3M | 134 | 402 | ||||
411 P3M | 137 | 411 | ||||
420 P3M | 140 | 420 | ||||
423 P3M | 141 | 423 | ||||
432 P3M | 144 | 432 | ||||
447 P3M | 149 | 447 | ||||
450 P3M | 150 | 450 | ||||
453 P3M | 151 | 453 | ||||
459 P3M | 153 | 459 | ||||
477 P3M | 159 | 477 | ||||
483 P3M | 161 | 483 | ||||
486 P3M | 162 | 486 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | |||
Type | Belt Number | Nominal Width | Nominal Width | |||
100 | 150 | |||||
PTBN | 489 P3M | 100 (10mm) 150 (15mm) | 163 | 489 | ||
501 P3M | 167 | 501 | ||||
504 P3M | 168 | 504 | ||||
507 P3M | 169 | 507 | ||||
510 P3M | 170 | 510 | ||||
525 P3M | 175 | 525 | ||||
537 P3M | 179 | 537 | ||||
552 P3M | 184 | 552 | ||||
561 P3M | 187 | 561 | ||||
588 P3M | 196 | 588 | ||||
600 P3M | 200 | 600 | ||||
633 P3M | 211 | 633 | ||||
660 P3M | 220 | 660 | ||||
675 P3M | 225 | 675 | ||||
681 P3M | 227 | 681 | ||||
693 P3M | 231 | 693 | ||||
699 P3M | 233 | 699 | ||||
738 P3M | 246 | 738 | ||||
753 P3M | 251 | 753 | ||||
756 P3M | 252 | 756 | ||||
789 P3M | 263 | 789 | ||||
804 P3M | 268 | 804 | ||||
852 P3M | 284 | 852 | ||||
861 P3M | 287 | 861 | ||||
879 P3M | 293 | 879 | ||||
891 P3M | 297 | 891 | ||||
918 P3M | 306 | 918 | ||||
933 P3M | 311 | 933 | ||||
948 P3M | 316 | 948 | ||||
957 P3M | 319 | 957 | ||||
1005 P3M | 335 | 1005 | ||||
1023 P3M | 341 | 1023 | ||||
1041 P3M | 347 | 1041 | ||||
1050 P3M | 350 | 1050 | ||||
1191 P3M | 397 | 1191 | - |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | |||
Type | Belt Number | Nominal Width | Nominal Width | |||
100 | 150 | |||||
PTBN | 215 P5M | 100 (10mm) 150 (15mm) | 43 | 215 | ||
225 P5M | 45 | 225 | ||||
255 P5M | 51 | 255 | ||||
260 P5M | 52 | 260 | ||||
275 P5M | 55 | 275 | ||||
295 P5M | 59 | 295 | ||||
300 P5M | 60 | 300 | ||||
310 P5M | 62 | 310 | ||||
320 P5M | 64 | 320 | ||||
325 P5M | 65 | 325 | ||||
340 P5M | 68 | 340 | ||||
350 P5M | 70 | 350 | ||||
370 P5M | 74 | 370 | ||||
375 P5M | 75 | 375 | ||||
400 P5M | 80 | 400 | ||||
420 P5M | 84 | 420 | ||||
425 P5M | 85 | 425 | ||||
430 P5M | 86 | 430 | ||||
440 P5M | 88 | 440 | ||||
450 P5M | 90 | 450 | ||||
475 P5M | 95 | 475 | ||||
490 P5M | 98 | 490 | ||||
500 P5M | 100 | 500 | ||||
515 P5M | 103 | 515 | ||||
520 P5M | 104 | 520 | ||||
525 P5M | 105 | 525 | ||||
530 P5M | 106 | 530 | ||||
550 P5M | 110 | 550 | ||||
555 P5M | 111 | 555 | ||||
560 P5M | 112 | 560 | ||||
565 P5M | 113 | 565 | ||||
570 P5M | 114 | 570 | ||||
575 P5M | 115 | 575 | ||||
595 P5M | 119 | 595 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | |||
Type | Belt Number | Nominal Width | Nominal Width | |||
100 | 150 | |||||
PTBN | 600 P5M | 100 (10mm) 150 (15mm) | 120 | 600 | ||
605 P5M | 121 | 605 | ||||
625 P5M | 125 | 625 | ||||
635 P5M | 127 | 635 | ||||
645 P5M | 129 | 645 | ||||
650 P5M | 130 | 650 | ||||
670 P5M | 134 | 670 | ||||
675 P5M | 135 | 675 | ||||
690 P5M | 138 | 690 | ||||
695 P5M | 139 | 695 | ||||
700 P5M | 140 | 700 | ||||
710 P5M | 142 | 710 | ||||
725 P5M | 145 | 725 | ||||
730 P5M | 146 | 730 | ||||
740 P5M | 148 | 740 | ||||
750 P5M | 150 | 750 | ||||
765 P5M | 153 | 765 | ||||
780 P5M | 156 | 780 | ||||
800 P5M | 160 | 800 | ||||
810 P5M | 162 | 810 | ||||
830 P5M | 166 | 830 | ||||
835 P5M | 167 | 835 | ||||
850 P5M | 170 | 850 | ||||
865 P5M | 173 | 865 | ||||
900 P5M | 180 | 900 | ||||
905 P5M | 181 | 905 | ||||
940 P5M | 188 | 940 | ||||
950 P5M | 190 | 950 | ||||
965 P5M | 193 | 965 | ||||
985 P5M | 197 | 985 | ||||
1000 P5M | 200 | 1000 | ||||
1025 P5M | 205 | 1025 | ||||
1050 P5M | 210 | 1050 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | |||
Type | Belt Number | Nominal Width | Nominal Width | |||
150 | 250 | |||||
PTBN | 376 P8M | 150 (15mm) 250 (25mm) | 47 | 376 | ||
392 P8M | 49 | 392 | ||||
440 P8M | 55 | 440 | ||||
480 P8M | 60 | 480 | ||||
512 P8M | 64 | 512 | ||||
520 P8M | 65 | 520 | ||||
536 P8M | 67 | 536 | ||||
560 P8M | 70 | 560 | ||||
584 P8M | 73 | 584 | ||||
600 P8M | 75 | 600 | ||||
632 P8M | 79 | 632 | ||||
640 P8M | 80 | 640 | ||||
656 P8M | 82 | 656 | ||||
680 P8M | 85 | 680 | ||||
712 P8M | 89 | 712 | ||||
720 P8M | 90 | 720 | ||||
752 P8M | 94 | 752 | ||||
760 P8M | 95 | 760 | ||||
800 P8M | 100 | 800 | ||||
832 P8M | 104 | 832 | ||||
840 P8M | 105 | 840 | ||||
848 P8M | 106 | 848 | ||||
856 P8M | 107 | 856 | ||||
880 P8M | 110 | 880 | ||||
896 P8M | 112 | 896 | ||||
912 P8M | 114 | 912 | ||||
920 P8M | 115 | 920 | ||||
936 P8M | 117 | 936 | ||||
944 P8M | 118 | 944 | ||||
960 P8M | 120 | 960 | ||||
984 P8M | 123 | 984 | ||||
1000 P8M | 125 | 1000 | ||||
1040 P8M | 130 | 1040 | ||||
1056 P8M | 132 | 1056 | ||||
1080 P8M | 135 | 1080 | ||||
1192 P8M | 149 | 1192 | - | |||
1440 P8M | 180 | 1440 | - | |||
2064 P8M | 258 | 2064 | - | |||
2496 P8M | 312 | 2496 | - | |||
2600 P8M | 325 | 2600 | - | |||
2800 P8M | 350 | 2800 | - | |||
3048 P8M | 381 | 3048 | - | |||
3200 P8M | 400 | 3200 | - |
Belt shape | Closed End | Belt tooth surface | Standard (Single Sided) | Belt material | Rubber Belt |
---|---|---|---|---|---|
Core Wire Material | Glass Fiber | Belt-shaped type | Circular Tooth Profile PX Belt | Transmission torque | High Torque Transmission |
This page is Timing belts / P#M / CR / glass fibre, part number PTBN416P2M-060.
You can find the detail information about specifications and dimensions on part number PTBN416P2M-060.
Configure
Basic Attributes
Type
Belt Type
Belt Width (mm)(mm)
Circumference Length(mm)
Number of Teeth(Teeth)
Filter by CAD data type
Filter by standard shipping days
Optional Attributes
Where does the idler pulleys have to be placed on the timing belt?
As a rule, the idler pulleys are positioned on the slack side, since the tension of the timing belt is here lowest during operation. Ideally, the timing belt is tensioned from the inside, because this prevents the timing belt from bending alternately. This is particularly recommended for timing belts with a steel tension cord. The idler pulley should always be larger than the smallest timing pulley of the belt drive system.
For what purpose can a timing belt with a round profile be used for?
Round profile timing belts can be used in many applications. These are well suited for transmitting torque. In addition, the reverse play is very low due to the round profile shape with changing direction of rotation. The timing belts are also well suited for highly precise positioning. Timing belts with a round tooth profile can therefore often be found in 3D printers.
Can multiple belts be used for the transfer?
A transmission can take place via one or more timing belts. If an equal distribution of the forces across the individual belts is not possible, it must be ensured that one belt alone can withstand the maximum load. In order to enable uniform distribution of forces, a precise adjustment is necessary. For this purpose, a toothed belt disc with clamping sleeve can be used, because it can be adjusted continuously and ensure uniform distribution.
Can a timing belt used for transmission?
With timing belts, a gear ratio or reduction in a drive is possible. The gear ratio is established based on the number of teeth on the pulleys. It should be ensured that the minimum number of teeth of the timing pulley disc is not undercut.
What is the possible tensile stress for timing belts?
The maximum allowable tension for MISUMI timing belts depends on the belt type, speed of rotation and belt pulley diameter. For more information, click on this link.
What is the minimum size of timing pulleys?
The minimum size or the minimum number of teeth of a timing pulley depends on the belt type used and the height of the applied speed or rotation. You can find more detailed information about the minimum number of teeth of timing pulley discs in the selection of Timing Pulleys available as a PDF.
Does a timing belt stretch a lot?
As opposed to a roller chain, the expansion is small. The length extension of timing belts is very stable. Therefore, it is not absolutely necessary to re-tension the timing belt during operation, as is necessary for chain drives. This makes the timing belt very easy to maintain compared to the chain. However, it should be ensured that the timing belt is free of oil, as the natural rubber could swell.
What is the purpose of a timing belt?
The primary task of a timing belt is the synchronous and slip-free transmission of force or power. Depending on the task, various profile shapes are available for timing belts. These can be roughly divided into drive, conveying and positioning. In the following overview, you can view the various areas of use: Overview as PDF
Part Number |
---|
PTBN1000P8M-250 |
PTBN1005P3M-100 |
PTBN1005P3M-150 |
PTBN420P2M-060 |
PTBN420P3M-100 |
PTBN420P3M-150 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | RoHS | Belt Type | Belt Width (mm) (mm) | Circumference Length (mm) | Number of Teeth (Teeth) |
---|---|---|---|---|---|---|---|---|---|
62.25 € | 1 | Available | 7 Days | 10 | P8M | 25 | 1000 | 125 | |
15.44 € | 1 | Available | 29 Days | 10 | P3M | 10 | 1005 | 335 | |
24.79 € | 1 | Available | 7 Days | 10 | P3M | 15 | 1005 | 335 | |
6.83 € | 1 | Available | 7 Days | 10 | P2M | 6 | 420 | 210 | |
9.87 € | 1 | Available | 7 Days | 10 | P3M | 10 | 420 | 140 | |
16.08 € | 1 | Available | 7 Days | 10 | P3M | 15 | 420 | 140 |