Linear shafts / stepped on one side / external thread / stepped on two sides / external thread (Part Numbers - CAD Download)

Linear shafts / stepped on one side / external thread / stepped on two sides / external thread
  • Order quantities extended (D-JIT)

(i)Remark

  • SFAF has been localized according to European needs and requirements. Please have a look on the EU version SFAFEU. SFAFEU is available in EN 1.1213 (Cf53) and h6 / h7.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

 

One End Stepped and Threaded:Related Image

 

Basic Properties (e.g. material, hardness, coating, tolerance) - Linear Shafts

 

TypeMaterialHardnessSurface Treatment
One End Stepped and ThreadedBoth Ends Stepped and Threaded
D Tol. g6D Tol. h5D Tol. f8D Tol. g6D Tol. h5D Tol. f8
SFAFSFUF-SFAXSFUX-EN 1.3505 Equiv.Effective Hardened Depth of Induction Hardening >>P.112
EN 1.3505 Equiv. 58HRC~
EN 1.4037 Equiv. 56HRC~
-
SSFAFSSFUF-SSFAXSSFUX-EN 1.4037 Equiv.
PSFAFPSFUF-PSFAXPSFUX-EN 1.3505 Equiv.Hard Chrome Plating
Plating Hardness: HV750 ~
Plating Thickness: 5µ or More ~
PSSFAFPSSFUF-PSSFAXPSSFUX-EN 1.4037 Equiv.
RSFAF--RSFAX--EN 1.3505 Equiv.LTBC Plating
--PSFGF--PSFGXEN 1.1191 Equiv.-Hard Chrome Plating
Plating Hardness: HV750 ~
Plating Thickness: 10µ or More ~
--PSSFGF--PSSFGXEN 1.4301 Equiv.

 

Further specifications can be found under the tab More Information.

 

Composition of a Product Code - Linear Shafts

 

Part Number-L-F-B-P-M-T-S-Q-N
SFAX20-400-F30-B20-P10-M8-T20-S15-Q10-N8
                   

 

Alterations - Linear Shafts


One End Stepped and Threaded:Related Image

You find further options in detail under Option Overview.

 

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
PSFUX40-[25-1460/1]-F[20-273/1]-B[12-210/1]-P[13-39/1]-MMS[12,​14,​18]-T[20-273/1]-S[12-210/1]-Q[13-39/1]-N[12,​16,​20,​24,​30]
PSFUX40-[25-1460/1]-F[20-273/1]-B[12-210/1]-P[13-39/1]-MMS[12,​14,​18]-T[20-273/1]-S[12-210/1]-Q[13-39/1]-NMC[12,​15,​17,​20,​25,​30]
PSFUX40-[25-1460/1]-F[20-273/1]-B[12-210/1]-P[13-39/1]-MMS[12,​14,​18]-T[20-273/1]-S[12-210/1]-Q[13-39/1]-NMS[12,​14,​18]
PSFUX50-[25-1460/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-M[16,​20,​24,​30]-T[20-343/1]-S[16-210/1]-Q[17-49/1]-N[16,​20,​24,​30]
PSFUX50-[25-1460/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-M[16,​20,​24,​30]-T[20-343/1]-S[16-210/1]-Q[17-49/1]-NMC[15,​17,​20,​25,​30]
PSFUX50-[25-1460/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-M[16,​20,​24,​30]-T[20-343/1]-S[16-210/1]-Q[17-49/1]-NMS[14,​18]
PSFUX50-[25-1460/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-MMC[15,​17,​20,​25,​30]-T[20-343/1]-S[16-210/1]-Q[17-49/1]-N[16,​20,​24,​30]
PSFUX50-[25-1460/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-MMC[15,​17,​20,​25,​30]-T[20-343/1]-S[16-210/1]-Q[17-49/1]-NMC[15,​17,​20,​25,​30]
PSFUX50-[25-1460/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-MMC[15,​17,​20,​25,​30]-T[20-343/1]-S[16-210/1]-Q[17-49/1]-NMS[14,​18]
PSFUX50-[25-1460/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-MMS[14,​18]-T[20-343/1]-S[16-210/1]-Q[17-49/1]-N[16,​20,​24,​30]
PSFUX50-[25-1460/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-MMS[14,​18]-T[20-343/1]-S[16-210/1]-Q[17-49/1]-NMC[15,​17,​20,​25,​30]
PSFUX50-[25-1460/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-MMS[14,​18]-T[20-343/1]-S[16-210/1]-Q[17-49/1]-NMS[14,​18]
PSSFAF8-[25-990/1]-F[10-42/1]-B[6-30/1]-P7-M6
PSSFAF8-[25-990/1]-F[10-42/1]-B[6-30/1]-P7-MMC6
PSSFAF10-[25-990/1]-F[10-63/1]-B[6-40/1]-P[7,​8,​9]-M[6,​8]
PSSFAF10-[25-990/1]-F[10-63/1]-B[6-40/1]-P[7,​8,​9]-MMC[6,​8]
PSSFAF12-[25-1190/1]-F[10-77/1]-B[6-50/1]-P[7,​8,​9,​10]-M[6,​8,​10]
PSSFAF12-[25-1190/1]-F[10-77/1]-B[6-50/1]-P[7,​8,​9,​10]-MMC[6,​8,​10]
PSSFAF12-[25-1190/1]-F[10-77/1]-B[6-50/1]-P[7,​8,​9,​10]-MMS10
PSSFAF13-[25-1190/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-M[6,​8,​10]
PSSFAF13-[25-1190/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-MMC[6,​8,​10]
PSSFAF13-[25-1190/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-MMS10
PSSFAF15-[25-1190/1]-F[10-98/1]-B[6-60/1]-MMC[6,​8,​10,​12]-M[6,​8,​10,​12]
PSSFAF15-[25-1190/1]-F[10-98/1]-B[6-60/1]-MMS[10,​12]-M[6,​8,​10,​12]
PSSFAF15-[25-1190/1]-F[10-98/1]-B[6-60/1]-P[7-14/1]-M[6,​8,​10,​12]
PSSFAF16-[25-1190/1]-F[10-105/1]-B[6-60/1]-P[7-15/1]-M[6,​8,​10,​12]
PSSFAF16-[25-1190/1]-F[10-105/1]-B[6-60/1]-P[7-15/1]-MMC[6,​8,​10,​12]
PSSFAF16-[25-1190/1]-F[10-105/1]-B[6-60/1]-P[7-15/1]-MMS[10,​12]
PSSFAF18-[25-1190/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-M[6,​8,​10,​12,​16]
PSSFAF18-[25-1190/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-MMC[6,​8,​10,​12]
PSSFAF18-[25-1190/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-MMS[10,​12,​14]
PSSFAF20-[25-1190/1]-F[10-133/1]-B[6-80/1]-P[7-19/1]-M[6,​8,​10,​12]
PSSFAF20-[25-1190/1]-F[10-133/1]-B[6-80/1]-P[7-19/1]-MMC[6,​8,​10,​12]
PSSFAF20-[25-1190/1]-F[10-133/1]-B[6-80/1]-P[7-19/1]-MMS[10,​12,​14,​18]
PSSFAF25-[25-1190/1]-F[10-168/1]-B[8-100/1]-P[9-24/1]-M[8,​10,​12,​16,​20,​24]
PSSFAF25-[25-1190/1]-F[10-168/1]-B[8-100/1]-P[9-24/1]-MMC[8,​10,​12,​15,​17,​20]
PSSFAF25-[25-1190/1]-F[10-168/1]-B[8-100/1]-P[9-24/1]-MMS[10,​12,​14,​18]
PSSFAF30-[25-1490/1]-F[10-203/1]-B[8-120/1]-P[9-29/1]-M[8,​10,​12,​16,​20,​24]
PSSFAF30-[25-1490/1]-F[10-203/1]-B[8-120/1]-P[9-29/1]-MMC[8,​10,​12,​15,​17,​20,​25]
PSSFAF30-[25-1490/1]-F[10-203/1]-B[8-120/1]-P[9-29/1]-MMS[10,​12,​14,​18]
PSSFAF35-[25-1480/1]-F[20-238/1]-B[10-210/1]-P[11-34/1]-M[10,​12,​16,​20,​24,​30]
PSSFAF35-[25-1480/1]-F[20-238/1]-B[10-210/1]-P[11-34/1]-MMC[10,​12,​15,​17,​20,​25,​30]
PSSFAF35-[25-1480/1]-F[20-238/1]-B[10-210/1]-P[11-34/1]-MMS[10,​12,​14,​18]
PSSFAF40-[25-1480/1]-F[20-273/1]-B[12-210/1]-P[13-39/1]-M[12,​16,​20,​24,​30]
PSSFAF40-[25-1480/1]-F[20-273/1]-B[12-210/1]-P[13-39/1]-MMC[12,​15,​17,​20,​25,​30]
PSSFAF40-[25-1480/1]-F[20-273/1]-B[12-210/1]-P[13-39/1]-MMS[12,​14,​18]
PSSFAF50-[25-1480/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-M[16,​20,​24,​30]
PSSFAF50-[25-1480/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-MMC[15,​17,​20,​25,​30]
PSSFAF50-[25-1480/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-MMS[14,​18]
PSSFAX8-[25-980/1]-F[10-42/1]-B[6-30/1]-P7-M6-T[10-42/1]-S[6-30/1]-Q7-N6
PSSFAX8-[25-980/1]-F[10-42/1]-B[6-30/1]-P7-M6-T[10-42/1]-S[6-30/1]-Q7-NMC6
PSSFAX8-[25-980/1]-F[10-42/1]-B[6-30/1]-P7-MMC6-T[10-42/1]-S[6-30/1]-Q7-N6
PSSFAX8-[25-980/1]-F[10-42/1]-B[6-30/1]-P7-MMC6-T[10-42/1]-S[6-30/1]-Q7-NMC6
PSSFAX10-[25-980/1]-F[10-63/1]-B[6-40/1]-P[7,​8,​9]-M[6,​8]-T[10-63/1]-S[6-40/1]-Q[7,​8,​9]-N[6,​8]
PSSFAX10-[25-980/1]-F[10-63/1]-B[6-40/1]-P[7,​8,​9]-M[6,​8]-T[10-63/1]-S[6-40/1]-Q[7,​8,​9]-NMC[6,​8]
PSSFAX10-[25-980/1]-F[10-63/1]-B[6-40/1]-P[7,​8,​9]-MMC[6,​8]-T[10-63/1]-S[6-40/1]-Q[7,​8,​9]-N[6,​8]
PSSFAX10-[25-980/1]-F[10-63/1]-B[6-40/1]-P[7,​8,​9]-MMC[6,​8]-T[10-63/1]-S[6-40/1]-Q[7,​8,​9]-NMC[6,​8]
PSSFAX12-[25-1180/1]-F[10-77/1]-B[6-50/1]-P[7,​8,​9,​10,​11]-M[6,​8,​10]-T[10-77/1]-S[6-50/1]-Q[7,​8,​9,​10,​11]-N[6,​8,​10]
PSSFAX12-[25-1180/1]-F[10-77/1]-B[6-50/1]-P[7,​8,​9,​10,​11]-M[6,​8,​10]-T[10-77/1]-S[6-50/1]-Q[7,​8,​9,​10,​11]-NMC[6,​8,​10]
PSSFAX12-[25-1180/1]-F[10-77/1]-B[6-50/1]-P[7,​8,​9,​10,​11]-M[6,​8,​10]-T[10-77/1]-S[6-50/1]-Q[7,​8,​9,​10,​11]-NMS10
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSBasic Shape Shaft end Shape (Right) [D] Diameter (Shaft)
(mm)
[L] Length (Shaft)
(mm)
Material Heat Treatment Surface Treatment ISO Tolerance Hardness [B] Length (thread)
(mm)
[MMC] Size (fine thread)
(mm)
[MMS] Size (fine thread)
(mm)
[NMC] Size (fine thread)
(mm)
[NMS] Size (fine thread)
(mm)
[F] Length (stud - offset - front side)
(mm)
[P] Diameter (stepped - front side)
(mm)
[Q]
(mm)
[S] Length (thread)
(mm)
[T] Length (stud - stepped - back side)
(mm)
[M] Size (thread - depth 2xM)
(mm)
[N] Size (thread - depth 2xN)
(mm)

-

1 7 Days 10Solid, Both Ends SteppedExternal thread4025 ~ 1460[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)12 ~ 210-12 ~ 18--20 ~ 27313 ~ 3913 ~ 3912 ~ 21020 ~ 273-12 ~ 30

-

1 7 Days 10Solid, Both Ends SteppedExternal thread4025 ~ 1460[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)12 ~ 210-12 ~ 1812 ~ 30-20 ~ 27313 ~ 3913 ~ 3912 ~ 21020 ~ 273--

-

1 7 Days 10Solid, Both Ends SteppedExternal thread4025 ~ 1460[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)12 ~ 210-12 ~ 18-12 ~ 1820 ~ 27313 ~ 3913 ~ 3912 ~ 21020 ~ 273--

-

1 7 Days 10Solid, Both Ends SteppedExternal thread5025 ~ 1460[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)16 ~ 210----20 ~ 34317 ~ 4917 ~ 4916 ~ 21020 ~ 34316 ~ 3016 ~ 30

-

1 7 Days 10Solid, Both Ends SteppedExternal thread5025 ~ 1460[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)16 ~ 210--15 ~ 30-20 ~ 34317 ~ 4917 ~ 4916 ~ 21020 ~ 34316 ~ 30-

-

1 7 Days 10Solid, Both Ends SteppedExternal thread5025 ~ 1460[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)16 ~ 210---14 ~ 1820 ~ 34317 ~ 4917 ~ 4916 ~ 21020 ~ 34316 ~ 30-

-

1 7 Days 10Solid, Both Ends SteppedExternal thread5025 ~ 1460[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)16 ~ 21015 ~ 30---20 ~ 34317 ~ 4917 ~ 4916 ~ 21020 ~ 343-16 ~ 30

-

1 7 Days 10Solid, Both Ends SteppedExternal thread5025 ~ 1460[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)16 ~ 21015 ~ 30-15 ~ 30-20 ~ 34317 ~ 4917 ~ 4916 ~ 21020 ~ 343--

-

1 7 Days 10Solid, Both Ends SteppedExternal thread5025 ~ 1460[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)16 ~ 21015 ~ 30--14 ~ 1820 ~ 34317 ~ 4917 ~ 4916 ~ 21020 ~ 343--

-

1 7 Days 10Solid, Both Ends SteppedExternal thread5025 ~ 1460[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)16 ~ 210-14 ~ 18--20 ~ 34317 ~ 4917 ~ 4916 ~ 21020 ~ 343-16 ~ 30

-

1 7 Days 10Solid, Both Ends SteppedExternal thread5025 ~ 1460[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)16 ~ 210-14 ~ 1815 ~ 30-20 ~ 34317 ~ 4917 ~ 4916 ~ 21020 ~ 343--

-

1 7 Days 10Solid, Both Ends SteppedExternal thread5025 ~ 1460[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)16 ~ 210-14 ~ 18-14 ~ 1820 ~ 34317 ~ 4917 ~ 4916 ~ 21020 ~ 343--

-

1 4 Days 10Solid, One End SteppedStraight825 ~ 990[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 30----10 ~ 427---6-

-

1 4 Days 10Solid, One End SteppedStraight825 ~ 990[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 306---10 ~ 427-----

-

1 4 Days 10Solid, One End SteppedStraight1025 ~ 990[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 40----10 ~ 637 ~ 9---6 ~ 8-

-

1 4 Days 10Solid, One End SteppedStraight1025 ~ 990[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 406 ~ 8---10 ~ 637 ~ 9-----

-

1 4 Days 10Solid, One End SteppedStraight1225 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 50----10 ~ 777 ~ 10---6 ~ 10-

-

1 4 Days 10Solid, One End SteppedStraight1225 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 506 ~ 10---10 ~ 777 ~ 10-----

-

1 4 Days 10Solid, One End SteppedStraight1225 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 50-10--10 ~ 777 ~ 10-----

-

1 4 Days 10Solid, One End SteppedStraight1325 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 50----10 ~ 847 ~ 12---6 ~ 10-

-

1 4 Days 10Solid, One End SteppedStraight1325 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 506 ~ 10---10 ~ 847 ~ 12-----

-

1 4 Days 10Solid, One End SteppedStraight1325 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 50-10--10 ~ 847 ~ 12-----

-

1 4 Days 10Solid, One End SteppedStraight1525 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 606 ~ 12---10 ~ 98----6 ~ 12-

-

1 4 Days 10Solid, One End SteppedStraight1525 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 60-10 ~ 12--10 ~ 98----6 ~ 12-

-

1 4 Days 10Solid, One End SteppedStraight1525 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 60----10 ~ 987 ~ 14---6 ~ 12-

-

1 4 Days 10Solid, One End SteppedStraight1625 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 60----10 ~ 1057 ~ 15---6 ~ 12-

-

1 4 Days 10Solid, One End SteppedStraight1625 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 606 ~ 12---10 ~ 1057 ~ 15-----

-

1 4 Days 10Solid, One End SteppedStraight1625 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 60-10 ~ 12--10 ~ 1057 ~ 15-----

-

1 7 Days 10Solid, One End SteppedStraight1825 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 80----10 ~ 1197 ~ 17---6 ~ 16-

-

1 7 Days 10Solid, One End SteppedStraight1825 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 806 ~ 12---10 ~ 1197 ~ 17-----

-

1 7 Days 10Solid, One End SteppedStraight1825 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 80-10 ~ 14--10 ~ 1197 ~ 17-----

-

1 4 Days 10Solid, One End SteppedStraight2025 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 80----10 ~ 1337 ~ 19---6 ~ 12-

-

1 4 Days 10Solid, One End SteppedStraight2025 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 806 ~ 12---10 ~ 1337 ~ 19-----

-

1 4 Days 10Solid, One End SteppedStraight2025 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 80-10 ~ 18--10 ~ 1337 ~ 19-----

-

1 4 Days 10Solid, One End SteppedStraight2525 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)8 ~ 100----10 ~ 1689 ~ 24---8 ~ 24-

-

1 4 Days 10Solid, One End SteppedStraight2525 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)8 ~ 1008 ~ 20---10 ~ 1689 ~ 24-----

-

1 4 Days 10Solid, One End SteppedStraight2525 ~ 1190[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)8 ~ 100-10 ~ 18--10 ~ 1689 ~ 24-----

-

1 4 Days 10Solid, One End SteppedStraight3025 ~ 1490[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)8 ~ 120----10 ~ 2039 ~ 29---8 ~ 24-

-

1 4 Days 10Solid, One End SteppedStraight3025 ~ 1490[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)8 ~ 1208 ~ 25---10 ~ 2039 ~ 29-----

-

1 4 Days 10Solid, One End SteppedStraight3025 ~ 1490[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)8 ~ 120-10 ~ 18--10 ~ 2039 ~ 29-----

-

1 7 Days 10Solid, One End SteppedStraight3525 ~ 1480[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)10 ~ 210----20 ~ 23811 ~ 34---10 ~ 30-

-

1 7 Days 10Solid, One End SteppedStraight3525 ~ 1480[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)10 ~ 21010 ~ 30---20 ~ 23811 ~ 34-----

-

1 7 Days 10Solid, One End SteppedStraight3525 ~ 1480[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)10 ~ 210-10 ~ 18--20 ~ 23811 ~ 34-----

-

1 7 Days 10Solid, One End SteppedStraight4025 ~ 1480[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)12 ~ 210----20 ~ 27313 ~ 39---12 ~ 30-

-

1 7 Days 10Solid, One End SteppedStraight4025 ~ 1480[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)12 ~ 21012 ~ 30---20 ~ 27313 ~ 39-----

-

1 7 Days 10Solid, One End SteppedStraight4025 ~ 1480[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)12 ~ 210-12 ~ 18--20 ~ 27313 ~ 39-----

-

1 7 Days 10Solid, One End SteppedStraight5025 ~ 1480[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)16 ~ 210----20 ~ 34317 ~ 49---16 ~ 30-

-

1 7 Days 10Solid, One End SteppedStraight5025 ~ 1480[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)16 ~ 21015 ~ 30---20 ~ 34317 ~ 49-----

-

1 7 Days 10Solid, One End SteppedStraight5025 ~ 1480[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)16 ~ 210-14 ~ 18--20 ~ 34317 ~ 49-----

-

1 4 Days 10Solid, Both Ends SteppedExternal thread825 ~ 980[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 30----10 ~ 42776 ~ 3010 ~ 4266

-

1 4 Days 10Solid, Both Ends SteppedExternal thread825 ~ 980[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 30--6-10 ~ 42776 ~ 3010 ~ 426-

-

1 4 Days 10Solid, Both Ends SteppedExternal thread825 ~ 980[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 306---10 ~ 42776 ~ 3010 ~ 42-6

-

1 4 Days 10Solid, Both Ends SteppedExternal thread825 ~ 980[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 306-6-10 ~ 42776 ~ 3010 ~ 42--

-

1 4 Days 10Solid, Both Ends SteppedExternal thread1025 ~ 980[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 40----10 ~ 637 ~ 97 ~ 96 ~ 4010 ~ 636 ~ 86 ~ 8

-

1 4 Days 10Solid, Both Ends SteppedExternal thread1025 ~ 980[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 40--6 ~ 8-10 ~ 637 ~ 97 ~ 96 ~ 4010 ~ 636 ~ 8-

-

1 4 Days 10Solid, Both Ends SteppedExternal thread1025 ~ 980[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 406 ~ 8---10 ~ 637 ~ 97 ~ 96 ~ 4010 ~ 63-6 ~ 8

-

1 4 Days 10Solid, Both Ends SteppedExternal thread1025 ~ 980[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 406 ~ 8-6 ~ 8-10 ~ 637 ~ 97 ~ 96 ~ 4010 ~ 63--

-

1 4 Days 10Solid, Both Ends SteppedExternal thread1225 ~ 1180[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 50----10 ~ 777 ~ 117 ~ 116 ~ 5010 ~ 776 ~ 106 ~ 10

-

1 4 Days 10Solid, Both Ends SteppedExternal thread1225 ~ 1180[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 50--6 ~ 10-10 ~ 777 ~ 117 ~ 116 ~ 5010 ~ 776 ~ 10-

-

1 4 Days 10Solid, Both Ends SteppedExternal thread1225 ~ 1180[Stainless Steel (martensitique)] EN 1.4037 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (56HRC~)6 ~ 50---1010 ~ 777 ~ 117 ~ 116 ~ 5010 ~ 776 ~ 10-

Loading...

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

 

One End Stepped and Threaded:Related Image

 

Specification Tables - Linear Shafts

 

Overview of the shaft designs as PDF

 

Part Number1mm IncrementM (Coarse)D Tol.(Y)Max.RC
TypeDLFBPg6h5f8
One End Stepped and Threaded
(D Tolerance g6)
SFAF
SSFAF

PSFAF
PSSFAF



(D Tolerance f8)
PSFGF
PSSFGF
(D Tolerance h5)
SFUF
SSFUF
PSFUF
PSSFUF
825~79010≤F≤Px5Pitchx3+(g)≤B≤Mx3M<P<D6       -0.005
-0.014
0
-0.006
-0.013
-0.035
8000.3 or Less0.5 or Less
1025~79068      -0.005
-0.014
0
-0.006
-0.013
-0.035
8000.3 or Less0.5 or Less
1225~9906810     -0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1325~9906810     -0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1525~990681012    -0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1625~1190681012    -0.006
-0.017
0
-0.008
-0.016
-0.043
12000.3 or Less0.5 or Less
1825~119068101216   -0.006
-0.017
0
-0.008
-0.016
-0.043
12000.3 or Less0.5 or Less
2025~119068101216   -0.007
-0.020
0
-0.009
-0.020
-0.053
12000.3 or Less1.0 or Less
2525~1190 810121620  -0.007
-0.020
0
-0.009
-0.020
-0.053
12000.3 or Less1.0 or Less
3025~1490 81012162024 -0.007
-0.020
0
-0.009
-0.020
-0.053
15000.3 or Less1.0 or Less
3525~148020≤F≤Px5  101216202430-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
 4025~1480   1216202430-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
5025~1480    16202430-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
 
Part Number1mm IncrementM (Coarse), N (Coarse) SelectionD Tol.(Y)Max.RC
TypeDLF, TB, SP, Qg6h5f8
Both Ends Stepped and Threaded
(D Tolerance g6)
SFAX
SSFAX

PSFAX
PSSFAX



(D Tolerance f8)
PSFGX
PSSFGX
(D Tolerance h5)
SFUX
SSFUX
PSFUX
PSSFUX
825~79010≤F≤Px5
10≤T≤Qx5
Pitchx3+(g)≤B≤Mx3
Pitchx3+(g)≤S≤Nx3
M<P<D
N<Q<D
6       -0.005
-0.014
0
-0.006
-0.013
-0.035
8000.3 or Less0.5 or Less
1025~79068      -0.005
-0.014
0
-0.006
-0.013
-0.035
8000.3 or Less0.5 or Less
1225~9906810     -0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1325~9906810     -0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1525~990681012    -0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1625~1190681012    -0.006
-0.017
0
-0.008
-0.016
-0.043
12000.3 or Less0.5 or Less
1825~119068101216   -0.006
-0.017
0
-0.008
-0.016
-0.043
12000.3 or Less0.5 or Less
2025~119068101216   -0.007
-0.020
0
-0.009
-0.020
-0.053
12000.3 or Less1.0 or Less
2525~1190 810121620  -0.007
-0.020
0
-0.009
-0.020
-0.053
12000.3 or Less1.0 or Less
3025~1490 81012162024 -0.007
-0.020
0
-0.009
-0.020
-0.053
15000.3 or Less1.0 or Less
3525~148020≤F≤Px5
20≤T≤Qx5
  101216202430-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
 4025~1480   1216202430-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
5025~1480    16202430-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
 
Coarse Thread Undercut Dimension
M
N
PitchMC
NC
(g)
61.04.42
81.256.03
101.57.73
121.759.44
162.013.04
202.516.45
243.019.65
303.525.05
 
Part Number1mm IncrementM (Coarse)D Tol.(Y)Max.RC
TypeDLFBPg6
One End Stepped and Threaded
(D Tolerance g6)
LTBC Plating
RSFAF
(Ymax≤800)
825~50010≤F≤Px5Pitchx3+(g)≤B≤Mx3M<P<D6      -0.005
-0.014
8000.3 or Less0.5 or Less
1025~50068     -0.005
-0.014
8000.3 or Less0.5 or Less
1225~5006810    -0.006
-0.017
10000.3 or Less0.5 or Less
1325~5006810    -0.006
-0.017
10000.3 or Less0.5 or Less
1525~500681012   -0.006
-0.017
10000.3 or Less0.5 or Less
1625~500681012   -0.006
-0.017
12000.3 or Less0.5 or Less
1825~50068101216  -0.006
-0.017
12000.3 or Less0.5 or Less
2025~50068101216  -0.007
-0.020
12000.3 or Less1.0 or Less
2525~500 810121620 -0.007
-0.020
12000.3 or Less1.0 or Less
3025~500 81012162024-0.007
-0.020
15000.3 or Less1.0 or Less
 
Part Number1mm IncrementM (Coarse), N (Coarse) SelectionD Tol.(Y)Max.RC
TypeDLF, TB, SP, Qg6
Both Ends Stepped and Threaded
(D Tolerance g6)
LTBC Plating
RSFAX
(Ymax≤800)
825~50010≤F≤Px5
10≤T≤Qx5
Pitchx3+(g)≤B≤Mx3
Pitchx3+(g)≤S≤Nx3
M<P<D
N<Q<D
6      -0.005
-0.014
8000.3 or Less0.5 or Less
1025~50068     -0.005
-0.014
8000.3 or Less0.5 or Less
1225~5006810    -0.006
-0.017
10000.3 or Less0.5 or Less
1325~5006810    -0.006
-0.017
10000.3 or Less0.5 or Less
1525~500681012   -0.006
-0.017
10000.3 or Less0.5 or Less
1625~500681012   -0.006
-0.017
12000.3 or Less0.5 or Less
1825~50068101216  -0.006
-0.017
12000.3 or Less0.5 or Less
2025~50068101216  -0.007
-0.020
12000.3 or Less1.0 or Less
2525~500 810121620 -0.007
-0.020
12000.3 or Less1.0 or Less
3025~500 81012162024-0.007
-0.020
15000.3 or Less1.0 or Less
F-B(T-S)≥2 is required.

 

Alterations - Linear Shafts


One End Stepped and Threaded:Related Image

You find further options in detail under Option Overview.

Basic information

Shaft end Shape (Left) External thread Shaft end Perpendicularity 0.2

Frequently Asked Questions (FAQ)

Question:

What is the difference between a hollow shaft and a solid shaft?

Answer:

With the same size, there are three differences between a hollow shaft and a solid shaft. Hollow shafts weigh less. The inner cavity of a hollow shaft is suitable for use as a channel (cable channel). Solid shafts are a bit more rigid (higher resistance torque).

Question:

What is the minimum order of linear shafts from MISUMI?

Answer:

MISUMI supplies solid shafts, hollow shafts and precision shafts starting at a lot size of 1. This also applies to all other items in our product range.

Question:

Noises and vibrations occur with a linear shaft. In addition, there are jerky movements. What could cause this?

Answer:

In general, it may be caused if the steel shaft is not properly lubricated. In addition, an incorrectly selected diameter tolerance of the linear shafts may also make the cycle of motion more difficult. When using MISUMI linear ball bearings, a g6 shaft tolerance is recommended (tolerance recommendations may vary depending on the manufacturer).

Question:

What is the strength of a solid shaft?

Answer:

The strength of a linear shaft, although it is a solid shaft, hollow shaft or precision shaft, should always be selected in consideration of the strength of the material used.

Question:

What are the advantages of a hollow shaft over a solid shaft?

Answer:

There are various advantages of a hollow shaft compared to a solid shaft. If the outer diameter is the same, the weight of a hollow shaft is lower than that of a solid shaft. However, the cavity of the hollow shaft can also be used as a cable channel or for cooling. A hollow shaft is at the same weight or with the same cross-sectional area more rigid than a solid shaft, because the outer diameter is larger. However, the question that needs to be answered is whether the advantage is a greater room utilization or less weight.

Question:

Is a hollow shaft stiffer than a solid shaft?

Answer:

The rigidity of a hollow shaft is slightly lower with the same outer diameter than that of a solid shaft. However, with the same cross-sectional area or with the same weight, the stiffness of a hollow shaft is higher than that of a solid shaft, because the outer diameter of the hollow shaft is larger.

Question:

Why do I have running grooves on the linear shafts of my 3D printers?

Answer:

The running grooves on the linear shaft may have been created, for example, by using a linear ball bearing. To prevent grooves from forming on a steel shaft, it should be hardened and hard chromium plated, making it more durable and resistant to the wear and tear from ball bearings.

Question:

How do the flexure properties of hollow shafts and solid shafts differ?

Answer:

With an equally large outer diameter, a solid shaft has better flexure properties than an equally large hollow shaft. However, the solid shaft is not much stiffer than a hollow shaft with the same outer diameter, since the outer sections mainly carry the load. Hollow shafts with the same cross-sectional area are more rigid than solid shafts, because they have a larger outer diameter. Therefore, there is physically more material in the outer sections for the bending, which bears the loads.

Question:

I need a lacquered or matted shaft because reflections cause problems with the optics. Does MISUMI have something like that?

Answer:

MISUMI LTBC-coated linear shafts are an alternative to painted or matted steel shafts. The LTBC coating is low-reflection and has the same effect as painted and matte shafts. In addition, LTBC-coated linear shafts are more resistant to wear and tear and flaking. You can find further information on LTBC coating here .

Question:

It has been shown that a hollow shaft is stronger than a solid shaft made of the same material. Why?

Answer:

A hollow shaft with the same outer dimensions is principally not stronger than a solid shaft. However, a hollow shaft per weight unit is stronger.

Show more FAQ Close

Complementary Products

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360