Cod piesă:
candidați nedefiniți.
Cod piesă |
---|
Preț unitar (fără TVA)(preț unitar cu TVA incluse) | Dată de expediere standard |
---|
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
[Features]
-Cone shaped neck inner radius that strongly contributes to taper machining that requires process reduction
.
Model Number
STCREM
Shank diameter d | Blade Diameter* D 0.01mm Unit Specification | Single Corner θ °−min 1' Unit Specification | Blade Length ℓ 0.1 mm Unit Specification | Inner R CR 0.01mm Unit Specification | End Cutting Edge Shape (Selection) | Overall Length L | |
Specified Range | ℓmax. | ||||||
4 | 0.50 to 3.00 | 0°15' to 30°00' | (1) 0.5 ≤ ℓ ≤ D×5 and (2) ℓ ≤ ℓmax. (See table at right) and (3) ![]() −(CR−CR×sinθ) | 8.0 | 0.10 ≤ CR ≤ 2.00 | T (Indented Center) F (Flat) | 50 |
6 | 0.50 to 5.00 | 10.0 | 60 | ||||
8 | 0.50 to 7.00 | 12.0 | 60 | ||||
10 | 0.50 to 9.00 | 14.0 | 80 | ||||
12 | 0.50 to 11.00 | 16.0 | 80 | ||||
16 | 0.50 to 15.00 | 20.0 | 100 |
*Note that the blade diameter (D) may not be available depending on the size.
Click here for the cutting conditions