5-Port Solenoid Valve, Body Ported, Single Unit, SY5000 Series (SY5120-3DZ-C8F-Q)

Promotional pricing ends 30/11/2024

SMC

Product Details:

Manufacturer part number: SY5120-3DZ-C8F-Q

Brand: SMC

Price: 74.53 €

Delivery time: 4 Days

Technical Data:

Features: Standard / Drip-Proof / Lubrication Free

Number of Solenoids: [Single] Single

Switching Type: 2-Position Exhaust

Status at Power Off: -

Voltage: 110 V AC

(i)Remark

Product images may be representative. Refer to the manufacturer's catalog for details.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

SY5120-3DZ-C8F-Q

Product specification
Part Numbers
Catalog

5-Port Solenoid Valve, Body Ported, Single Unit, SY5000 Series Specifications

5-Port Solenoid Valve, Body Ported Single Unit external appearance

*Pictures show representational models. They may differ from the actual product.

Series		SY5000
Usable Fluids		Air
Internal Pilot Operating Pressure Range MPa	2 position single	0.15 to 0.7
	2 position double	0.1 to 0.7
	3 position	0.2 to 0.7
Ambient and Fluid temperature (°C)		-10 to 50 (no freezing)
Maximum Operating frequency (Hz)	2 position single, double	5
Maximum Operating frequency (Hz)	3 position	3
Manual Override (Manual Operation)		Non-locking push type, push-turn locking slotted type, push-turn locking lever type
Pilot Exhaust Method		Main valve, pilot valve common exhaust type
Lubrication		Not required
Mounting Orientation		Unrestricted
^*Impact Resistance/Vibration Resistance (m/s²)		150/30
Enclosure		Dust-proof (*DIN terminal and M8 connector are IP65)

*Based on IEC60529.
*Impact resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)

Solenoid Specifications

Electrical Entry			Grommet (G)/(H) DIN terminal (D)/(Y) L-type plug connector (L) M8 connector (W) M-type plug connector (M)
Electrical Entry			G, H, L, M, W	D, Y
Coil-rated Voltage (V)	DC		24, 12, 6, 5, 3	24, 12
Coil-rated Voltage (V)	AC 50/60 Hz		100, 110, 200, 220
Allowable Voltage Fluctuation			±10% of rated voltage*
Power Consumption W	DC	Standard	0.35 (with light: 0.4) [0.94 (with DIN terminal light: 0.45)]
Power Consumption W	DC	With power saving circuit	0.1 (only with light) * [Startup 0.4, holding 0.1]
*Apparent power (VA)	AC	100 V	0.78 (with light: 0.81)	0.78 (with light: 0.87)
		110 V 115 V	0.86 (with light: 0.89) [0.94 (with indicator light: 0.97)]	0.86 (with light: 0.97) [0.94 (with light: 1.07)]
		200 V	1.18 (with light: 1.22)	1.15 (with light: 1.30)
		220 V [230 V]	1.30 (with light: 1.34) [1.42 (with light: 1.46)]	1.27 (with light: 1.46) [1.39 (with light: 1.60)]
Surge Voltage Suppressor			Diode (varistor for DIN terminal and non-polar type are )
Indicator Light			LED (neon bulb for DIN terminal AC)

*The 110 V AC and 115 V AC types are interchangeable. The 220 V AC and 230 V AC types are also interchangeable.
For 115 V AC and 230 V AC, the allowable voltage fluctuation is -15 to +5% of the rated voltage.
*Energy-saving circuit not available with DIN terminal / M8 connector.
For details, see the SMC catalog.

Response Time

*Standard type based on JIS B8419:2010 dynamic performance testing (Coil temperature 20°C, at rated voltage)

Type of actuation	Response time (ms) (at 0.5 MPa)
	Without light or surge voltage suppressor	With light and surge voltage suppressor
	Without light or surge voltage suppressor	S, Z type	R, U type
2-position single	19 or less	26 or less	19 or less
2-position double	18 or less	22 or less	18 or less
3 Position	32 or less	38 or less	32 or less

Flow Rate Characteristics / Weight Table

Valve Model Numbers	Type of Actuation		Piping Size		Flow Rate Characteristics						Weight g
			1, 5, 3 (P, EA, EB)	4, 2 (A, B)	1 → 4/2 (P → A/B)			4/2 → 5/3 (A/B → EA/EB)			Grommet	L, M plug connector	DIN terminal	W M8 connector
			1, 5, 3 (P, EA, EB)	4, 2 (A, B)	C (dm³ / [s·bar])	b	Cv	C (dm³ / [s·bar])	b	Cv	Grommet	L, M plug connector	DIN terminal	W M8 connector
SY5□20-□-01	2 Position	Single	1/8	1/8	1.9	0.35	0.49	2.4	0.39	0.61	70	72	93	76
	2 Position	Double			1.9	0.35	0.49	2.4	0.39	0.61	88	93	135	101
	3 Position	Closed Center			1.7	0.43	0.45	1.8	0.35	0.46	93	98	140	106
		Exhaust Center			1.5	0.44	0.41	2.5 [1.5]	0.32 [0.43]	0.59 [0.40]
		Pressure Center			2.2 [0.91]	0.46 [0.58]	0.61 [0.28]	1.8	0.38	0.46
SY5□20-□-C4	2 Position	Single		C4 (ø4 [port size 4 mm] one-touch fitting)	0.75	0.43	0.20	0.85	0.64	0.30	94	96	117	100
	2 Position	Double			0.75	0.43	0.20	0.85	0.64	0.30	111	117	159	125
	3 Position	Closed Center			0.74	0.40	0.19	0.84	0.57	0.28	117	122	164	130
		Exhaust Center			0.75	0.36	0.19	0.84 [0.84]	0.64 [0.53]	0.30 [0.27]
		Pressure Center			0.78 [0.71]	0.44 [0.37]	0.21 [0.18]	0.84	0.57	0.27
SY5□20-□-C6	2 Position	Single		C6 (ø6 [piping connection port diameter 6 mm] one-touch fitting)	1.5	0.33	0.33	2.0	0.37	0.52	88	91	112	95
	2 Position	Double			1.5	0.33	0.33	2.0	0.37	0.52	106	111	153	119
	3 Position	Closed Center			1.3	0.31	0.33	1.6	0.32	0.39	111	116	158	124
		Exhaust Center			1.3	0.33	0.33	1.8 [1.4]	0.35 [0.37]	0.44 [0.35]
		Pressure Center			1.7 [0.80]	0.31 [0.47]	0.42 [0.23]	1.7	0.33	0.44
SY5□20-□-C8	2 Position	Single		C8 (ø8 [piping connection port diameter 8 mm] one-touch fitting)	1.9	0.21	0.45	2.3	0.29	0.57	80	82	103	86
	2 Position	Double			1.9	0.21	0.45	2.3	0.29	0.57	98	103	145	111
	3 Position	Closed Center			1.6	0.29	0.39	1.7	0.38	0.46	103	108	150	116
		Exhaust Center			1.4	0.38	0.39	2.0 [1.5]	0.37 [0.41]	0.52 [0.43]
		Pressure Center			2.2 [1.6]	0.32 [0.44]	0.56 [0.44]	1.8	0.41	0.50

*Values shown inside brackets are when at normal position.

Structure Drawing

2 position single structure drawing

2-position single indicator symbol

2-position double structure drawing

2-position double display symbol

Number	Part name	Material	Note
1	Body	Aluminum die-casted	White
2	Adapter Plate	Resin	White
3	End Plate	Resin	White
4	Piston	Resin	-
5	Spool Valve Assembly	Aluminum/H-NBR	-
6	Pilot Valve Assembly	-	-
7	M5 Port block assembly	-	-

*Mounting screw tightening torque SY5000 (M3): 0.6 N⋅m

SY5000 Series Dimensional Outline Drawings

*Values in [ ] are for AC.

(Unit: mm)

2-position single grommet (G), (H): SY5120-□G/H□□-C4/N3/C6/N7/C8/N9□ (-F2) dimensional drawings

(Unit: mm)

With foot bracket, SY5120-□G/H□□-C4/N3/C6/N7/C8/N9□-F1 dimensional drawings

(Unit: mm)

SY5120-□G/H□□-01□ (-F1/2) dimensional drawing

(Unit: mm)

L plug connector (L): SY5120-□L□□-C4/N3/C6/N7/C8/N9□ (-F1/2) dimensional drawing

(Unit: mm)

M plug connector (M): SY5120-□M□□-C4/N3/C6/N7/C8/N9 (-F1/2) dimensional drawing

*See the manufacturer's catalog for information other than that above.

Data to be displayed: 30; 45; 60

Part Number
SY5120-3DZ-C8F-Q

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Features	Number of Solenoids	Switching Type	Status at Power Off	Voltage	Pipe Port Type	Nominal Pipe Thread Size	Compatible Cylinder Diameter (Ø)	CV Value	Connection Tube Diameter	Pressure Rating (MPa)	Pilot Air Supply	Manual Switch	Coil specifications	Lead wire electrical entry	Manual	Indicator light / Surge voltage suppressor	Bracket	Made to order specifications	CE compliant	Valve specifications	Compliance with IEC standards	Type of fitting thread part
	74.53 €	1		4 Days	Standard / Drip-Proof / Lubrication Free	[Single] Single	2-Position Exhaust	-	110 V AC	One-Touch Plumbing	-	-	-	Ø8	-	Internal	Non-Locking	Standard	DIN terminal with connector	Non-locking push style	With indicator light and surge voltage suppressor	No bracket	-	Yes	-	-	G

Basic information

Type	Solenoid Valves	Application	Single Use	Number of Ports	5-Port Valve
Installation method	Direct	Plumbing	Direct Plumbing	Driving Type	Pilot Type Spool
Seal Type	Soft Seal

This page is 5-Port Solenoid Valve, Body Ported, Single Unit, SY5000 Series, part number SY5120-3DZ-C8F-Q.
You can find the detail information about specifications and dimensions on part number SY5120-3DZ-C8F-Q.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Features
- Standard
- Drip-Proof
- Lubrication Free
Clear
Status at Power Off
- Self-Retaining
- Self-Reset (Spring Return)
- Self-Recovery (Pressure Differential Return)
Clear
Nominal Pipe Thread Size
1/8
Clear
Compatible Cylinder Diameter(Ø)
80 or Less
Clear
CV Value
0.19

0.2

0.23

0.28

0.33

0.39

0.41

0.44

0.45

0.49
Clear
Pressure Rating(MPa)
- 0.15 to 0.7
- 0.1 to 0.7
- 0.2 to 0.7
- -0.1 to 0.7
Clear
Made to order specifications
Body ported type external pilot

Main valve fluorine rubber specification

None
Clear
Valve specifications
- SY5000
Clear
Compliance with IEC standards
- IEC 60947-5-2 standard product
- None
Clear
Type
- SY5120
- SY5220
- SY5320
- SY5420
- SY5520
Clear
Number of Solenoids
- Single
  - Single
- Double
Clear
Switching Type
- 2-Position Exhaust
- 3-Position Closed Center
- 3-Position Exhaust Center
- 3-Position Pressure Center
Clear
Voltage
- 12 V DC
- 24 V DC
- 100 V AC
- 110 V AC
- 200 V AC
- 220 V AC
- 5 V DC
- 6 V DC
- 3 V DC
Clear
Pipe Port Type
- Rc (R)
  - Rc
- NPT
- NPTF
- G
- One-Touch Plumbing
Clear
Connection Tube Diameter
- Ø4
- Ø6
- Ø8
- Ø1/4
- Ø5/16
Clear
Pilot Air Supply
- Internal
- External
Clear
Manual Switch
- Non-Locking
- Lock
Clear
Coil specifications
- Standard
- With energy saving circuit
Clear
Lead wire electrical entry
- Grommet lead wire 0.3 m
- L plug connector with lead wire 0.3 m
- M plug connector with lead wire 0.3 m
- Grommet lead wire 0.6 m
- M8 connector without connector cable
- M8 connector with cable (Length 300 mm)
- M8 connector with cable (Length 500 mm)
- M8 connector with cable (Length 2000 mm)
- M8 connector with cable (Length 5000 mm)
- M8 connector without connector (IEC60947-5-2)
- M12 connector with cable 2,000 mm
- M12 connector with cable 5,000 mm
- Grommet / Lead wire length: 300 mm
- L plug connector / With lead wire (length: 300 mm)
- M plug connector / With lead wire (length: 300 mm)
- Grommet / Lead wire length: 600 mm
- DIN43650B standard DIN terminal, with connector
- DIN43650C standard DIN terminal with connector
- DIN43650C standard DIN terminal without connector
- DIN 43650B standard DIN terminal without connector
- DIN terminal / With connector
- DIN terminal / without connector
- DIN terminal with connector
- DIN terminal without connector
- L plug connector / No connector
- L plug connector without connector
- L plug connector without lead wire
- M plug connector / Without connector
- M plug connector / Without lead wire
- M plug connector without connector
- M plug connector without lead wire
Clear
Manual
- Non-locking push style
- Non-locking, push type
- Push-turn locking hand-operated type
- Push-turn locking lever style
- Push-turn locking screwdriver-operated type
- Push-turn locking slotted style
Clear
Indicator light / Surge voltage suppressor
- With indicator light / surge voltage suppressor (non-polarized)
- With indicator light and surge voltage suppressor
- With indicator light and surge voltage suppressor (non-polar type)
- With surge voltage suppressor
- With surge voltage suppressor (non-polar type)
- With surge voltage suppressor (non-polarized)
- Without indicator light / surge voltage suppressor
Clear
Bracket
- No bracket
- With foot bracket
- With side bracket
Clear
CE compliant
- CE compliant product
- Non-compliant
- None
- Yes
Clear
Type of fitting thread part
- G
- NPTF
- Rc
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

3 Days or Less

4 Days or Less

5 Days or Less

7 Days or Less

12 Days or Less

13 Days or Less

16 Days or Less

17 Days or Less

22 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
SY5120-1DE-01-Q
SY5120-1DO-01F-Q
SY5120-1DZ-01-F1-Q
SY5120-3DZD-01F-Q
SY5120-3DZD-C6F-Q
SY5120-3DZE-01F-Q

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Features	Number of Solenoids	Switching Type	Status at Power Off	Voltage	Pipe Port Type	Nominal Pipe Thread Size	Compatible Cylinder Diameter (Ø)	CV Value	Connection Tube Diameter	Pressure Rating (MPa)	Pilot Air Supply	Manual Switch	Coil specifications	Lead wire electrical entry	Manual	Indicator light / Surge voltage suppressor	Bracket	Made to order specifications	CE compliant	Valve specifications	Compliance with IEC standards	Type of fitting thread part
63.32 €	1	26 Days	Drip-Proof / Standard / Lubrication Free	[Single] Single	2-Position Exhaust	-	100 V AC	[Rc (R)] Rc	1/8	-	-	-	-	Internal	Lock	Standard	DIN terminal with connector	Push-turn locking lever style	Without indicator light / surge voltage suppressor	No bracket	-	Yes	-	-	-
59.89 €	1	26 Days	Drip-Proof / Standard / Lubrication Free	[Single] Single	2-Position Exhaust	-	100 V AC	G	1/8	-	-	-	-	Internal	Non-Locking	Standard	DIN terminal without connector	Non-locking, push type / Non-locking push style	Without indicator light / surge voltage suppressor	No bracket	-	Yes	-	-	-
72.65 €	1	26 Days	Drip-Proof / Standard / Lubrication Free	[Single] Single	2-Position Exhaust	-	100 V AC	[Rc (R)] Rc	1/8	-	-	-	-	Internal	Non-Locking	Standard	DIN terminal with connector	Non-locking, push type / Non-locking push style	With indicator light / surge voltage suppressor (non-polarized)	With foot bracket	-	Yes	-	-	-
69.23 €	1	26 Days	Drip-Proof / Standard / Lubrication Free	[Single] Single	2-Position Exhaust	-	110 V AC	G	1/8	-	-	-	-	Internal	Lock	Standard	DIN terminal with connector	Push-turn locking slotted style	With indicator light / surge voltage suppressor (non-polarized)	No bracket	-	Yes	-	-	-
74.53 €	1	26 Days	Drip-Proof / Standard / Lubrication Free	[Single] Single	2-Position Exhaust	-	110 V AC	One-Touch Plumbing	-	-	-	Ø6	-	Internal	Lock	Standard	DIN terminal with connector	Push-turn locking slotted style	With indicator light and surge voltage suppressor	No bracket	-	Yes	-	-	G
70.02 €	1	26 Days	Drip-Proof / Standard / Lubrication Free	[Single] Single	2-Position Exhaust	-	110 V AC	G	1/8	-	-	-	-	Internal	Lock	Standard	DIN terminal with connector	Push-turn locking lever style	With indicator light / surge voltage suppressor (non-polarized)	No bracket	-	Yes	-	-	-