Point Tap Series, V Coating, Long Shank, V-LT-POT

Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

V-LT-POT-OH2-M4X0.7X100

Product specification
Part Numbers
Catalog

Data to be displayed: 30; 45; 60

Part Number
V-LT-POT-OH2-M4X0.7X100

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Nominal	Pitch, Number of Threading (mm)	Work material	Length under neck (mm)	Shank diameter (mm)	Thread Length (mm)	Protrusion	Tool No.
	27.47 €	1		6 Days	M4	0.7	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	21	5	13	-	8316213

Products homepage

Basic information

Screw Types	Meter	Chamfer threads	5P	Tool Material Type	Vanadium high-speed steel
Tap Type	Point tap	Hole type	For through hole	Coating Y/N	Available
Coating Type	TiCN	L(mm)	100	Accuracy	OH2
Number of Grooves	3

This page is Point Tap Series, V Coating, Long Shank, V-LT-POT, part number V-LT-POT-OH2-M4X0.7X100.
You can find the detail information about specifications and dimensions on part number V-LT-POT-OH2-M4X0.7X100.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Pitch, Number of Threading(mm)
0.7

1
Clear
Work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear
Length under neck(mm)
21

29
Clear
Shank diameter(mm)
5

6
Clear
Thread Length(mm)
13

19
Clear
Type
- V-LT-POT
Clear
Nominal
M4

M6
Clear

Filter by standard shipping days

All

6 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
V-LT-POT-OH2-M6X1X100

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Nominal	Pitch, Number of Threading (mm)	Work material	Length under neck (mm)	Shank diameter (mm)	Thread Length (mm)	Protrusion	Tool No.
	23.17 €	1		6 Days	M6	1	Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◯] / Titanium Alloy (Ti-6Al-4V, etc)[◯] / Magnesium Alloy (MC)[◯] / Zinc Alloy Casting (ZDC)[◯] / Aluminum Rolled Material (AL)[◯] / Aluminum Alloy Casting (AC, ADC)[◯] / Brass cast iron (BsC)[◯] / Bronze (Pb)[◯] / Copper (Cu)[◯] / Brass (Bs)[◯] / Ductile Cast Iron (FCD)[◎] / Tool Steel (Before SKD Hardening)[◯] / Steel casting (SC)[◎]	29	6	19	Available	8316219