Preset Torque Wrench
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
CMPB8006
Basic information
| Product Type | Preset Mold | Torque adjustment range(N・m) | 150～800 | Insertion Angle(mm) | 19 |
|---|---|---|---|---|---|
| Minimum graduation(N・M) | 5 | Overall Length(mm) | 1050 | Torque Precision(±%) | 4 |
| Main body: option | Main Body | Trusco Code | 410-6067 | Mass(g) | 5800 |
| Features | The torque value to be measured can be pre-set in advance, and this is especially effective for use when work is continuous, and when gradations are difficult to read. A locking function after the measuring value has been set is included. Measuring action not only on the right torque but also on the left torque is enabled. As the head width is narrow, this can also be used to measure areas where no other devices in the past could measure. A rubber ring is attached on the bottom of the head part which increases the degree of sealing, reducing the incidence of failure and keeping high accuracy. | Application | For general tightening tasks. | Load direction | Left/ right |
This page is Preset Torque Wrench, part number CMPB8006.
You can find the detail information about specifications and dimensions on part number CMPB8006.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.