Ultra-Hard Rotary Bar Type S A Series Master Cut (Part Numbers)
[Features]
· Most commonly used blade shape with good cutting ability and favorable finishing surface.
· Chips are nearly granular and are safe.
· Most commonly used blade shape with good cutting ability and favorable finishing surface.
· Chips are nearly granular and are safe.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
S-1
Basic information
| Product Type | Shank diameter 3 mm | Blade tip shape | Cross Cut | Shape | Reverse Taper Type |
|---|---|---|---|---|---|
| Shower Material | All Carbide | blade diameter(mm) | φ3.0 | Blade Length(mm) | 4.8 |
| Overall Length(mm) | 38 | Blade angle(°) | 10 |
This page is Ultra-Hard Rotary Bar Type S A Series Master Cut, part number S-1.
You can find the detail information about specifications and dimensions on part number S-1.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.