Goketsu With Flange
- Volume Discount
[Features]
· Diagonal slit: Discharges cutting chips to prevent heat build-up and to maintain sharpness.
· Short tip: Provides a heat dissipating effect and reduces the amount which the substrate shakes.
· Diamond layer: The deeper slit grooves improve cutting chip discharge and sharpness.
· Rounded edge: The tip edges are rounded to prevent chipping and to improve safety.
[Applications]
· For cutting reinforced (10-mm rebar) concrete, granite and blocks
· Diagonal slit: Discharges cutting chips to prevent heat build-up and to maintain sharpness.
· Short tip: Provides a heat dissipating effect and reduces the amount which the substrate shakes.
· Diamond layer: The deeper slit grooves improve cutting chip discharge and sharpness.
· Rounded edge: The tip edges are rounded to prevent chipping and to improve safety.
[Applications]
· For cutting reinforced (10-mm rebar) concrete, granite and blocks
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SE-GF5-M10
Basic information
| Product Type | Diamond cutter | Wheel Type | Segment Type | Specifications | Dry Type |
|---|---|---|---|---|---|
| Application | For concrete, mortar / Stone Material | Outer Diameter(mm) | 125 | Blade thickness(mm) | 1.9 |
| Hole Diameter(mm) | M10 | Tip Height(mm) | 8 | Included ring(mm) | 35×3 |
This page is Goketsu With Flange, part number SE-GF5-M10.
You can find the detail information about specifications and dimensions on part number SE-GF5-M10.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.