KOHARA GEAR INDUSTRY Rack Gears / Toothed Racks
Narrow search by specifying Shape
-
Square Rack -
Round Rack -
Flexible Rack -
Tapered Racks
?* Information on days to ship and prices
-
Molded Flexible Rack
KOHARA GEAR INDUSTRY
Molded flexible rack made by extrusion molding of Duracon®, that can be freely shaped.
Duracon® is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 34.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Rack gears / hardened / ground / SRG
KOHARA GEAR INDUSTRY
Tooth surface induction hardening applied to S45C material, for tooth surface hardness 50 to 60HRC, tooth surface ground finish KHK R001 3 grade series, reasonably priced hardened rack. Both end surface finished products can be connected and used for long lengths.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 70.42 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Rack gears / SR
KOHARA GEAR INDUSTRY
[Additional machining possible]
*Ohara gear (KHK) rack gear added to, MISUMI-VONA lineup.
* In addition to specified size cuts, side and rear hole tapping, and side counterbore machining can be done.
Please specify desired dimensions in specification / dimensions on the left.
Note: Will be machined one end. Delivered without surface treatment applied to the cut end.
[Features]
Rack made from S45C, with rich selection of modules, lengths etc. at a reasonable price.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 11.39 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Rack gears / helical
KOHARA GEAR INDUSTRY
Helical rack with a high contact gear ratio, and is effective for noise and vibration control. Both end face and mount hole processed type also available.- 2D / 3D CAD data available
Starting from∗ ： 25.09 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Rack gears / plastic
KOHARA GEAR INDUSTRY
MC Nylon material is used, so lightweight and can be used without lubrication. Ideal for clean rooms and equipment adverse to lubricating oil.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 87.94 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rack gears / helical / ground / KRHG
KOHARA GEAR INDUSTRY
Tempered SCM440 material, high-precision, strong, quiet, and wear resistant high quality, perpendicular to the teeth type ground helical rack.- 2D / 3D CAD data available
Starting from∗ ： 133.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Rack gears / CP
KOHARA GEAR INDUSTRY
CP rack with 1 pinion rotation movement amount in integer length.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 13.17 € Special price Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Round racks / stainless steel
KOHARA GEAR INDUSTRY
Stainless steel round processed rack with outer diameter tolerance h9. Use for rust-intolerant machinery.- 2D / 3D CAD data available
Starting from∗ ： 114.39 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
CP Metal Flexible Rack
KOHARA GEAR INDUSTRY
Machined CP metal flexible rack made of SS400. Continuous length product with total length up to 4000 mm available. Can bend to an arc to some degree to suit base.- 2D / 3D CAD data available
Starting from∗ ： 174.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 99.23 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Rack gears / platic / DRF / DRFD / DRFK
KOHARA GEAR INDUSTRY
[Features]
· Plastic rack with less water absorption and smaller dimensional change than MC nylon.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 89.29 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Quenched and tempered ground rack
KOHARA GEAR INDUSTRY
Ground rack made from thermal refined SCM440, with induction hardened teeth surface, for 51% stronger tooth surface than thermal refined only rack. J-series with mount hole processing also available- 2D / 3D CAD data available
Starting from∗ ： 99.16 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rack gears / round / CP
KOHARA GEAR INDUSTRY
CP round processed rack with outer diameter tolerance h9, S45C made. Convenient in applications when the rack needs to be used in reciprocal motion.- 2D / 3D CAD data available
Starting from∗ ： 78.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Rack gears / BSR
KOHARA GEAR INDUSTRY
Fine pitch rack made from rust resistant brass (C3604) with excellent workability. BSS Use together with gear.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 23.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Round racks
KOHARA GEAR INDUSTRY
Round processed rack with outer diameter tolerance h9, S45C made. Convenient in applications when the rack needs to be used in reciprocal motion. S series with easy to machine shaft part also available.- 2D / 3D CAD data available
Starting from∗ ： 74.73 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Rack gears / thermal refined / ground
KOHARA GEAR INDUSTRY
CP thermal refined ground rack, made of thermal refined SCM440 material. Price reduced by 20% compared with the previous product, with surface installation made easy by enlarged C side of the mounting surface.- 2D / 3D CAD data available
Starting from∗ ： 534.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Rack gears / hardened / CP/ SRGCP
KOHARA GEAR INDUSTRY
CP ground rack made from S45C, with induction hardened tooth surface, at a reasonable price. CP ground rack with excellent wear resistance, and high precision positioning. J series also available.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 71.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![[Full Length Specified] Brass Rack BSR](//uk.misumi-ec.com/linked/material/mech/KHK1/PHOTO/bsr_1.jpg?$product_view_b$)
[Full Length Specified] Brass Rack BSR
KOHARA GEAR INDUSTRY
[Additional machining possible]
*Ohara gear (KHK) rack gear added to, MISUMI-VONA lineup.
* Please specify desired dimensions in specification / dimensions on the left.
* Will be machined one end. Delivered without surface treatment applied to the cut end.
[Features]
Fine pitch rack made from rust resistant brass (C3604) with excellent workability. BSS Use together with gear.Min. Shipping Days ： 14 Days -
![[All Length / Bolt Hole Specifiable] Plastic Rack PR](//uk.misumi-ec.com/linked/material/mech/KHK1/PHOTO/221005398987.jpg?$product_view_b$)
[All Length / Bolt Hole Specifiable] Plastic Rack PR
KOHARA GEAR INDUSTRY
[Additional machining possible]
*Ohara gear (KHK) rack gear added to, MISUMI-VONA lineup.
* In addition to specified size cuts, side and rear hole tapping, and side counterbore machining can be done.
* Please specify desired dimensions in specification / dimensions on the left.
* Will be machined one end. Delivered without surface treatment applied to the cut end.
[Features]
· MC Nylon material is used, so lightweight and can be used without lubrication. Ideal for clean rooms and equipment adverse to lubricating oil.Min. Shipping Days ： 14 Days
![[Full Length Specified] Brass Rack BSR](http://uk.misumi-ec.com/linked/material/mech/KHK1/PHOTO/bsr_1.jpg?$product_view_b$)
![[All Length / Bolt Hole Specifiable] Plastic Rack PR](http://uk.misumi-ec.com/linked/material/mech/KHK1/PHOTO/221005398987.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Tooth Type |
| Environmentally friendly |
| Shape |
| Characteristics/Applications |
| Module (M) / Circular Pitch (P) |
| Length L(mm) |
| Material |
| Heat Treatment |
| Ground Tooth |
| Surface Treatment |
| Material Details |
| Length (nominal) |
| Number of Teeth(teeth) |
| Tooth Width B(mm) |
| Rack Dia. D(Ø) |
| End Finish Machining |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY |
| Product Series | |||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Starting from∗ | 34.75 € *Unit price with basic configuration Volume Discount | 70.42 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 11.39 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 25.09 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 87.94 € *Unit price with basic configuration Volume Discount | 133.82 € *Unit price with basic configuration | 13.17 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 114.39 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 174.29 € *Unit price with basic configuration | 99.23 € *Unit price with basic configuration Volume Discount | 89.29 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 99.16 € *Unit price with basic configuration | 78.54 € *Unit price with basic configuration | 23.94 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 74.73 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 534.65 € *Unit price with basic configuration | 71.60 € *Unit price with basic configuration Volume Discount | - | - |
| Min. Shipping Days ： | 5 Days | Same day | Same day | 6 Days | 5 Days | 6 Days | 5 Days | Same day | 6 Days | 5 Days | Same day | 5 Days | 6 Days | Same day | Same day | 6 Days | 6 Days | 14 Days | 14 Days |
| Specifications |
| ||||||||||||||||||
| Tooth Type | Standard | Standard | Standard | Helical | Standard | Helical | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Environmentally friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shape | Flexible Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Square Rack | Round Rack | Flexible Rack | Square Rack | Square Rack | Square Rack | Round Rack | Square Rack | Round Rack | Square Rack | Square Rack | Square Rack | Square Rack |
| Characteristics/Applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Module (M) / Circular Pitch (P) | 0.8 ～ 2 | 1 ～ 6 | 0.5 ～ 10 | 2 ～ 3 | 1 ～ 3 | 1 ～ 1.5 | 0.7958 ～ 6.3662 | 1 ～ 3 | 1.5915 | 1 ～ 4 | 1 ～ 3 | 1 ～ 3 | 0.7958 ～ 3.1831 | 0.5 ～ 1 | 1 ～ 5 | 1.5915 ～ 3.1831 | 1.5915 ～ 6.3662 | 0.8 ～ 1 | 1 |
| Length L(mm) | 2000 | 98 ～ 111 | 98 ～ 505 | 95 ～ 1010 | 505 | 98 ～ 101 | 98 ～ 103 | 505 ～ 1010 | 2000 ～ 4000 | 505 | 499.51 ～ 1005.31 | 98 ～ 101 | 505 ～ 1010 | 303 | 505 ～ 1010 | 1000 | 98 ～ 103 | 20 ～ 303 | 20 ～ 505 |
| Material | Resin | General Steel Material | General Steel Material | General Steel Material | Resin | General Steel Material | General Steel Material | Stainless Steel | General Steel Material | Stainless Steel | Resin | General Steel Material | General Steel Material | Brass | General Steel Material | General Steel Material | General Steel Material | Brass | Resin |
| Heat Treatment | Not Provided | High Frequency | Not Provided | Not Provided | Not Provided | Thermal Refined | Not Provided | Not Provided | Not Provided | Others | Not Provided | Thermal Refined | Not Provided | Not Provided | Not Provided | Thermal Refined | High Frequency | Not Provided | Not Provided |
| Ground Tooth | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Not Provided |
| Surface Treatment | Not Provided | Black Oxide | Black Oxide | Black Oxide | Not Provided | Not Provided | Black Oxide | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Black Oxide | Not Provided | Black Oxide | Not Provided | Black Oxide | Not Provided | Not Provided |
| Material Details | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length (nominal) | 2000 | 100 ～ 110 | 100 ～ 500 | 100 ～ 1000 | 500 | 100 | 100 | 500 ～ 1000 | 2000 ～ 4000 | 500 | 500 ～ 1000 | 100 | 500 ～ 1000 | 300 | 500 ～ 1000 | 1000 | 100 | - | - |
| Number of Teeth(teeth) | - | 4 ～ 29 | 3 ～ 159 | 7 ～ 152 | 52 ～ 159 | 19 ～ 28 | 3 ～ 38 | 52 ～ 159 | - | 39 ～ 159 | 53 ～ 212 | 9 ～ 29 | 99 ～ 200 | 94 ～ 190 | 39 ～ 159 | 100 ～ 200 | 3 ～ 18 | - | - |
| Tooth Width B(mm) | 3.8 ～ 8 | 10 ～ 60 | 5 ～ 90 | 25 ～ 35 | 10 ～ 30 | 8 ～ 12 | 10 ～ 60 | - | 10 | 10 ～ 40 | 10 ～ 30 | 10 ～ 30 | - | 3 ～ 6 | - | 15 ～ 30 | 15 ～ 60 | 4 ～ 6 | 10 |
| Rack Dia. D(Ø) | - | - | - | - | - | - | - | 10 ～ 30 | - | - | - | - | 10 ～ 30 | - | 10 ～ 50 | - | - | - | - |
| End Finish Machining | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
![[Full Length Specified] Brass Rack BSR](http://uk.misumi-ec.com/linked/material/mech/KHK1/PHOTO/bsr_1.jpg?$product_view_c$)
![[All Length / Bolt Hole Specifiable] Plastic Rack PR](http://uk.misumi-ec.com/linked/material/mech/KHK1/PHOTO/221005398987.jpg?$product_view_c$)
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Tooth Type
-
Standard -
Helical
-
-
Environmentally friendly
-
Characteristics/Applications
-
Module (M) / Circular Pitch (P)
-
Length L(mm)
- 1,005.31
- 1,500
- 1,507.96
- 2,035.75
- 2,042.04
- 2,045.17
- 2,048.31
- 2,049.88
- 2,050
- 45.3
- 94.25
- 95
- 98
- 98.01
- 98.96
- 100
- 101
- 103
- 108
- 111
- 123
- 151
- 155
- 166
- 200
- 202~205
- 248
- 250
- 251
- 254
- 265
- 292.17
- 295.31
- 296.85
- 296.88
- 298.45
- 299.08
- 300
- 300.02
- 301.59
- 303
- 303~306
- 352
- 490.09
- 494.8
- 495
- 496.37
- 497.63
- 499.51
- 500
- 502.65
- 502.66
- 503~506
- 505
- 505~508
- 508.94
- 565
- 995.24
- 997.4
- 997.45
- 999
- 999.02
- 999.03
- 1000
- 1005
- 1005.3
- 1005.31
- 1008.5
- 1010
- 1018
- 1021.0
- 1500
- 1507
- 1507.96
- 1507.97
- 1508
- 1602.2
- 2000
- 2035.75
- 2036
- 2040
- 2042
- 2042.04
- 2045
- 2045.17
- 2045.18
- 2048
- 2048.31
- 2048.32
- 2049.88
- 2049.89
- 2050
- 3000
- 4000
[20-505/1mm Unit(s)]
-
Material
- General Steel Material
- Stainless Steel
- Aluminum
- Resin
- Brass
-
Heat Treatment
- Not Provided
- Thermal Refined
- Annealed
- High Frequency
- Normalized
- Others
-
Ground Tooth
- Not Provided
- Provided
-
Surface Treatment
- Not Provided
- Black Oxide
-
Material Details
- EN 1.1191 Equiv.
- EN 1.4301 Equiv.
- Free-Cutting Brass
- MC Nylon
- Polyacetal
-
Length (nominal)
-
Number of Teeth(teeth)
-
Tooth Width B(mm)
-
Rack Dia. D(Ø)
-
End Finish Machining
Narrow search by specifying Brand
-
- MISUMI (1)
- KOHARA GEAR INDUSTRY (19)
- KYOUIKU GEAR MFG（KG） (7)
- AOKI SEIMITSU KOGYO (1)
- NORELEM (0)
- ELESA (0)
- SANKOSEISAKUSHO (0)
- KATAYAMA CHAIN (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
Examples how you can use these components Test
Categories related to Rack Gears / Toothed Racks
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.