Dryers

?* Information on days to ship and prices

• • Promotional pricing ends 30/11/2024

  

  IDG, Membrane Air Dryer

  SMC

  Use of a hollow fiber membrane makes it possible to easily supply dry air.
  Non-fluorocarbon, compatible with low dew point (-60°C), no vibration or heat discharge.
  [Features]
  · Energy saving.
  & nbspPurge air flow reduced by up to 39 L/min (ANR).
  · Space saving.
  & Flexible mounting orientation, IDG1 Series is easy to install in narrow spaces.
  · High performance.
  & Time to reach standard dew point reduced by 40 minutes.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	229.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Refrigerated Air Dryer Refrigerant Used R134a (HFC) IDFA□E Series for EU/Asia/Oceania

  SMC

  Air dryer with improved corrosion resistance due to the use of stainless-steel heat exchanger.
  [Features]
  · Power supply voltage: Single-phase 230 V AC (50 Hz) *Single-phase 200 V AC (50 Hz) for IDFA6E only.
  · Power supply voltage: Single-phase 200/220 V AC (60 Hz) selectable.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,016.01 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Connection Hoses

  PREVOST

  Compressed air at the compressor outlet contains water (droplets or vapour) which can compromise the operation of pneumatic machines and tools.
  To guarantee top-quality work, the water must be eliminated from the air: with an air dryer. The dryer uses a heat exchange process to reduce the temperature of the compressed air, causing water in the air to condensate (dew point). The condensed water is then evacuated through a drain built into the dryer.

  Select to compare

  Configure now
  Starting from∗ ：	49.30 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Refrigerated Air Dryer IDFA60 / 70 / 80 / 90 Series for Use in Europe, Asia and Oceania

  SMC

  This is a Refrigerated Air Dryer IDFA60/70/80/90 Series for Use in Europe, Asia and Oceania.
  [Features]
  ・ Usable in high temperature environments
  ・ Increased air flow rate capacity
  ・ A new stainless steel heat exchanger is used to reduce loads on the refrigerator
  ・ Improved maintainability
  ・ Improved resistance to contaminants and longer lifespan for the auto drain valve
  ・ It protects pneumatic equipment from moisture

  Select to compare

  Configure now
  Starting from∗ ：	3,388.66 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Refrigerated Air Dryer, Refrigerant R134a (HFC) High Temperature Air Inlet, IDU□E Series

  SMC

  Refrigerated air dryer that protects pneumatic equipment from moisture.
  [Features]
  · Removes the vapor from the moist compressed air delivered by the compressor, and prevents it from causing the pneumatic equipment to fail.
  · Improved corrosion resistance with the use of stainless-steel heat exchanger.
  · High-temperature intake air type.
  · IDU-□E-10: Single-phase: 100 V AC (50 Hz), 100/110 V AC (60 Hz).
  · IDU-□E-20: Single-phase: 200 V AC (50 Hz), 200/220 V AC (60 Hz).
  · IDU-□E-23: Single-phase 230 V AC (50 Hz).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2,111.02 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  IDFA3~75E, Refrigerated Air Dryer

  SMC

  Refrigerated air dryer with improved corrosion resistance due to the use of a stainless-steel heat exchanger.
  [Features]
  · Power supply voltage: Single-phase 230 V AC (50 Hz).
  · Auto drain: Float type (normally open).
  · Coating color: Body panel: urban white 1, Base: urban gray 2.
  · Compliant standards: EC directive (CE marking).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3,009.41 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  IDFA100 / 125 / 150F, Refrigerated Air Dryer, Large Sizes

  SMC

  Refrigerated air dryer for high-temperature environments.
  [Features]
  · Ambient temperature: Up to 45°C.
  · Inlet air temperature: Up to 60°C.
  · Energy-saving design.
  · Uses a corrosion-resistant stainless steel heat exchanger that reduces exhaust heat by up to 25% to prevent the ambient temperature from rising.
  · Size: 100F, 125F, 150F.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9,806.83 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  IDH, Thermo-dryer

  SMC

  Thermo-dryer is able to provide compressed air under the same conditions and with the same quality regardless of the season.
  [Features]
  · Stable supply of temperature- and pressure-controlled dry clean air.
  · Power supply can be used all over the world.
  · Compact and space saving.
  · Can be installed close to a wall.
  · Power supply voltage: Single-phase 100/200/230 V AC (50/60 Hz).
  · RoHS compliant.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4,882.26 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Moisture Indicator 6119-2C Series

  CKD

  For monitoring the dew point of the dry air dryer.
  
  [Features]
  · Moisture indicator monitors the dew-point of ultra-dry air using the scientific characteristics of silica gel.
  · When the relative humidity of compressed air becomes 10%, the gel turns pink thereby making it easy to keep the air dry.

  Select to compare

  Configure now
  Starting from∗ ：	77.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Heatless Air Dryer ID20 / ID30 / ID40 / ID60

  SMC

  Heatless air dryer that is ideal for applications that require dry air with a low dew point.
  [Features]
  · Supplies dry air with a low dew point of -30°C or less.
  · Small and lightweight without heater and electric control panel.
  · Use the indicator to check the outlet dew point. (Self-regenerative type enables easy maintenance.)
  · Standard size: 20, 30, 40, 60.
  · Thread type: Rc, G, NPT.
  · Single-phase: 100 V AC (50 Hz), 100/110 V AC (60 Hz), Single-phase: 110 V AC (50 Hz).
  · Single-phase: 200 V AC (50 Hz), 200/220 V AC (60 Hz), Single-phase: 220 V AC (50 Hz).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2,772.73 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  IDG-A, Membrane Air Dryer Series

  SMC

  Use of a hollow fiber membrane makes it possible to easily supply dry air.
  Non-fluorocarbon, compatible with low dew point (-60°C), no vibration or heat discharge.
  [Features]
  · Energy saving.
  & nbspPurge air flow reduced by up to 39 L/min (ANR).
  · Space saving.
  & nbspOverall length reduced by up to 59 mm.
  · High performance.
  & Time to reach standard dew point reduced by 40 minutes.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,250.47 €
  	Special price
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Membrane Air Dryer, Unit Type IDG□A Series

  SMC

  Use of a hollow fiber membrane makes it possible to easily supply dry air.
  Non-fluorocarbon, compatible with low dew point (-60°C), no vibration or heat discharge.
  [Features]
  · Energy saving.
  & nbspPurge air flow reduced by up to 39 L/min (ANR).
  · Space saving.
  · High performance.
  & Time to reach standard dew point reduced by 40 minutes.
  · Adopted a new air combination that reduces required maintenance space and weight.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,450.71 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Refrigerated Air Dryer IDF60 / 70 / 80 / 90 Series

  SMC

  This is a Refrigerated Air Dryer IDF60/70/80/90 Series.
  [Features]
  ・ Usable in high temperature environments
  ・ Increased air flow rate capacity
  ・ A new stainless steel heat exchanger is used to reduce loads on the refrigerator
  ・ Improved maintainability
  ・ Improved resistance to contaminants and longer lifespan for the auto drain valve
  ・ It protects pneumatic equipment from moisture

  Select to compare

  Configure now
  Starting from∗ ：	3,061.60 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Refrigerated Air Dryer IDFC60 / 70 / 80 / 90 Series for Use in Southeast Asia

  SMC

  This is a Refrigerated Air Dryer IDFC60/70/80/90 Series for Use in Southeast Asia.
  [Features]
  ・ This product can be used in high temperature environments in tropical regions
  ・ Increased air flow rate capacity
  ・ A new stainless steel heat exchanger is used to reduce loads on the refrigerator
  ・ Improved maintainability
  ・ Improved resistance to contaminants and longer lifespan for the auto drain valve

  Select to compare

  Configure now
  Starting from∗ ：	7,325.27 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Desiccant air dryer, PDAD Series

  FESTO

  Select to compare

  Configure now
  Starting from∗ ：	2,813.92 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Compact Dryer Fiber Dry Dryer Unit Flexible Type

  NIHON PISCO

  Air dryer with hollow fibre membrane that does not require power supply. [Outlet flow rate (l/min)]40

  Select to compare

  Configure now
  Starting from∗ ：	525.34 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Compact Dryer Fiber Dry Dryer Unit Union Straight Type

  NIHON PISCO

  Hollow fiber membrane type air dryer requiring no electricity.

  Select to compare

  Configure now
  Starting from∗ ：	540.95 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Compact Dryer Fiber Dry Dryer, Filter Set Type

  NIHON PISCO

  [Features]
  · Connects by sensing the filter in the middle of the hollow fiber membrane type air dryer pipe without requiring power supply.
  · Water droplets removed from the refrigerated dry air are discharged in the form of water vapor.
  · Cannot be drained. One-touch fitting is built-in to enable regulating the purged air flow.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	543.65 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Compact Dryer Fiber Dry Resin Dryer Unit Type

  NIHON PISCO

  [Features]
  · Connects by sensing the filter in the middle of the hollow fiber membrane type air dryer pipe without requiring power supply.
  · Water droplets removed from the refrigerated dry air are discharged in the form of water vapor.
  · One-touch fitting is built-in to enable regulation of the purged air flow which cannot be drained.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	429.57 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Compact Dryer Fiber Dry Metal Dryer Unit Type

  NIHON PISCO

  [Features]
  · Connects by sensing the filter in the middle of the hollow fiber membrane type air dryer pipe without requiring power supply.
  · Water droplets removed from the refrigerated dry air are discharged in the form of water vapor.
  · One-touch fitting is built-in to enable regulation of the purged air flow which cannot be drained.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	523.98 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Refrigerated Air Dryer, Refrigerant R134a (HFC) Standard Temperature Air Inlet, IDF□E Series

  SMC

  Refrigerated air dryer that protects pneumatic equipment from moisture.
  [Features]
  · Removes the vapor from the moist compressed air delivered by the compressor, and prevents it from causing the pneumatic equipment to fail.
  · Air flow capacity increased up to 40%.
  · Power consumption reduced up to 40%.
  · Energy-saving design.
  · Improved corrosion resistance with the use of stainless-steel heat exchanger.
  · Exhaust heat reduced by 25%, controlling increases in ambient temperature (air-cooled specification) and reducing heat discharging water amount (water-cooled specification).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2,254.26 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Refrigerated Air Dryer Standard Temperature Air Inlet, IDF□E Series

  SMC

  Refrigerated air dryer with improved corrosion resistance due to the use of a stainless-steel heat exchanger.
  [Features]
  · Protects pneumatic equipment from moisture.
  · Removes the vapor from the moist compressed air delivered by the compressor, and prevents it from causing the pneumatic equipment to fail.
  · Air flow capacity increased up to 40%.
  · Power consumption reduced up to 40%.
  · Energy-saving design.
  · Exhaust heat reduced by 25%, controlling increases in ambient temperature (air-cooled specification) and reducing heat discharging water amount (water-cooled specification).
  · Inlet air temperature: 35°C (22E, 37E) / 40°C (55E, 75E).
  · Outlet air pressure dew point: 10°C.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6,747.23 €
  Min. Shipping Days ：	98 Days

  *Unit price with basic configuration

• 

  Refrigerated Air Dryer, Refrigerant R407C (HFC), IDF100F / 125F / 150F Series

  SMC

  Refrigerated air dryer with energy-saving design that can be used in a high-temperature environment (ambient temperature up to 45°C).
  [Features]
  · Air-cooled/water-cooled.
  · Removes the vapor from the moist compressed air delivered by the compressor, and prevents it from causing the pneumatic equipment to fail.
  · Ambient temperature up to 45°C with air-cooled specification.
  · Energy-saving design: Dryer exhaust heat reduced by up to 25%.
  · Reduced exhaust heat for more compact design of air conditioners and energy-saving operation.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18,189.23 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Refrigerated Air Dryer, Refrigerant R407C (HFC) High Temperature Air Inlet, IDU□E Series

  SMC

  Refrigerated air dryer that protects pneumatic equipment from moisture.
  [Features]
  · Removes the vapor from the moist compressed air delivered by the compressor and prevents it from causing the pneumatic equipment to fail.
  · Improved corrosion resistance with the use of stainless-steel heat exchanger.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5,372.34 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Refrigerated Air Dryer, Refrigerant R407C (HFC), IDF100FS / 125FS / 150FS Series

  SMC

  Refrigerated air dryer for high-temperature environments.
  [Features]
  · Double energy-saving function series that saves up to 76% energy by using a second re-heater and digital scroll compressor.
  · Exhaust heat: Reduced by up to 25%.
  · Ambient temperature: Up to 45°C.
  · Inlet air temperature: Up to 60°C.
  · ECO switch.
  · Switch between energy-saving operation mode and normal operation mode depending on the season and operating environment.
  · RoHS compliant.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27,532.13 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Membrane Air Dryer, Unit Type IDG Series

  SMC

  Dryer that uses a hollow fiber membrane for easy supply of dry air.
  [Features]
  · Energy saving.
  · Purge air flow reduced by up to 39 L/min (ANR).
  · Space saving.
  · High performance.
  · Time to reach reference dew point reduced by 40 minutes.
  · Adopts a new air combination that reduces required maintenance space and weight.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	492.51 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Accessory, Mounting Bracket, IDG Series

  SMC

  · Mounting Bracket.
  · 10 sizes available.

  Select to compare

  Configure now
  Starting from∗ ：	14.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Network Link Hoses

  PREVOST

  Compressed air at the compressor outlet contains water (droplets or vapour) which can compromise the operation of pneumatic machines and tools.
  To guarantee top-quality work, the water must be eliminated from the air: with an air dryer. The dryer uses a heat exchange process to reduce the temperature of the compressed air, causing water in the air to condensate (dew point). The condensed water is then evacuated through a drain built into the dryer.

  Select to compare

  Configure now
  Starting from∗ ：	55.02 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  By-Pass Sets

  PREVOST

  Compressed air at the compressor outlet contains water (droplets or vapour) which can compromise the operation of pneumatic machines and tools.
  To guarantee top-quality work, the water must be eliminated from the air: with an air dryer. The dryer uses a heat exchange process to reduce the temperature of the compressed air, causing water in the air to condensate (dew point). The condensed water is then evacuated through a drain built into the dryer.

  Select to compare

  Configure now
  Starting from∗ ：	75.75 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Service Set for ALASKA

  PREVOST

  Compressed air at the compressor outlet contains water (droplets or vapour) which can compromise the operation of pneumatic machines and tools.
  To guarantee top-quality work, the water must be eliminated from the air: with an air dryer. The dryer uses a heat exchange process to reduce the temperature of the compressed air, causing water in the air to condensate (dew point). The condensed water is then evacuated through a drain built into the dryer.

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Maintenance Kit for ALASKA

  PREVOST

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Altitude Refrigeration Dryers

  PREVOST

  Compressed air at the compressor outlet contains water (droplets or vapour) which can compromise the operation of pneumatic machines and tools.
  To guarantee top-quality work, the water must be eliminated from the air: with an air dryer. The dryer uses a heat exchange process to reduce the temperature of the compressed air, causing water in the air to condensate (dew point). The condensed water is then evacuated through a drain built into the dryer.

  Select to compare

  Configure now
  Starting from∗ ：	1,368.50 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Refrigeration Dryers with By-pass Hose and Flexible Hose

  PREVOST

  Compressed air at the compressor outlet contains water (droplets or vapour) which can compromise the operation of pneumatic machines and tools.
  To guarantee top-quality work, the water must be eliminated from the air: with an air dryer. The dryer uses a heat exchange process to reduce the temperature of the compressed air, causing water in the air to condensate (dew point). The condensed water is then evacuated through a drain built into the dryer.

  Select to compare

  Configure now
  Starting from∗ ：	1,519.00 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Refrigeration Dryers with By-pass Hose, Flexible Hose and Micron Filter

  PREVOST

  Compressed air at the compressor outlet contains water (droplets or vapour) which can compromise the operation of pneumatic machines and tools.
  To guarantee top-quality work, the water must be eliminated from the air: with an air dryer. The dryer uses a heat exchange process to reduce the temperature of the compressed air, causing water in the air to condensate (dew point). The condensed water is then evacuated through a drain built into the dryer.

  Select to compare

  Configure now
  Starting from∗ ：	1,895.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...