Ejector sleeves with core pins, 1-fold stepped（Material：SKD61）
?* Information on days to ship and prices
-
Configure now
Min. Shipping Days ： Quote -
Core pins with ejector sleeves / steel / nitrided / stepped / inside diameter selectable / set
MISUMI
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： Quote
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Product composition |
| Material |
| Surface treatment |
| Head thickness |
| D (Shaft diameter)(mm) |
| P (Tip diameter)(mm) |
| V (Hole diameter)(mm) |
| Concentricity |
| Inner dia. tolerance |
| Tapered or not |
| Center pin tip shape |
|
| |
| Brand | MISUMI | MISUMI |
| Product Series | Core pins with ejector sleeves / steel / nitrided / stepped / set | Core pins with ejector sleeves / steel / nitrided / stepped / inside diameter selectable / set |
| CAD |
|
|
| Starting from∗ | - | - |
| Min. Shipping Days | Quote | Quote |
| Product composition | Center pin sets | Center pin sets |
| Material | SKD61 | SKD61 |
| Surface treatment | Nitrided | Nitrided |
| Head thickness | 4mm(T4) / 8mm(JIS) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) |
| D (Shaft diameter)(mm) | 4 ～ 12 | 5 ～ 12 |
| P (Tip diameter)(mm) | - | 3.5 ～ 11.95 |
| V (Hole diameter)(mm) | 2 ～ 5.5 | 2 ～ 8 |
| Concentricity | ◎0.06 | ◎0.06 |
| Inner dia. tolerance | H7 | H7 |
| Tapered or not | No | No |
| Center pin tip shape | S / A / B / C / D / E | S / A / B / C / D / E |
Loading...
Filter by:
-
Product composition
- Center pin sets
-
Material
- SKD61
-
Surface treatment
- Nitrided
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
D (Shaft diameter)(mm)
-
P (Tip diameter)(mm)
-
V (Hole diameter)(mm)
-
Concentricity
- ◎0.06
-
Inner dia. tolerance
-
Tapered or not
- No
-
Center pin tip shape
Brand
CAD data type
-
- 2D
- 3D
Categories related to Ejector sleeves with core pins, 1-fold stepped
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.