Electrodes / straight shaft / conical tip
Desen de ansamblu
EMSG
[ M ]CW008A Equiv. Pure Copper
| B | D | Part Number | L | A° | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A P | 10° | 15° | 20° | 30° | Type | P | ||||||||
| 1.5 | - | - | 3.7 | - | 6 | EMSG | 1.5 | 60 | 20 | |||||
| 2 | 10.3 | 6.8 | 5.1 | 3.4 | 2 | 60 | 70 | 10 | 15 | 20 | 30 | |||
| 2.5 | 13.1 | 8.7 | 6.5 | 4.3 | 2.5 | |||||||||
| 3 | 16.0 | 10.6 | 7.9 | 5.2 | 3 | 60 | 70 | 10 | 15 | 20 | 30 | |||
| 90 | 20 | 30 | ||||||||||||
| 4 | 21.7 | 14.4 | 10.8 | 7.1 | 4 | 60 | 70 | 10 | 15 | 20 | 30 | |||
| 90 | 20 | |||||||||||||
| 5 | - | - | 13.6 | 9.0 | 5 | 60 | 70 | 20 | 30 | |||||
| 90 | 20 | |||||||||||||
| 6 | - | - | 16.4 | 10.8 | 6 | 60 | 70 | 20 | 30 | |||||
| 90 | 20 | |||||||||||||
Specifications
| Part Number | - | L | - | A | ||
| EMSG2 | - | 60 | - | 30 | ||
Example
・Oblique gates require angular hole processing that are
often difficult by drilling. Electro discharging is suitable
for preparing an angular hole in places where the drill tip
would not be well aligned or broken.
・The di dimension is dependent on the runner diameter (W).
Select the appropriate P dimension in accordance with d1.
[ ! ]The electrode's tip may be bent if it is dropped or its tip
directly touches other objects.
If so, make sure to perform dressing before using it for
rotating discharge process.
often difficult by drilling. Electro discharging is suitable
for preparing an angular hole in places where the drill tip
would not be well aligned or broken.
・The di dimension is dependent on the runner diameter (W).
Select the appropriate P dimension in accordance with d1.
[ ! ]The electrode's tip may be bent if it is dropped or its tip
directly touches other objects.
If so, make sure to perform dressing before using it for
rotating discharge process.
Informații detaliate
Informații de bază
Atenție
- Please check the content on our website as the PDF does not contain the most up-to-date information.