Ejector pins / head flattened on one side / tool steel / nitrided / stepped / engraved face / tip diameter, length configurable
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Tip diameter tolerance (Reference tolerance) | Head thickness | D (Shaft diameter) (mm) | P (Tip diameter) (mm) | Number of engraving characters | L (L dimension) (mm) | N (mm) | Engraving character designation | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | -0.01/-0.02 | 6mm(JIS) | 5 | 4.5 ～ 4.9 | 5 characters | 50 ～ 300 | 13 ～ 290 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 6mm(JIS) | 5.5 | 4.5 ～ 5.4 | 5 characters | 50 ～ 300 | 13 ～ 290 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 6mm(JIS) | 6 | 4.5 ～ 5.9 | 5 characters | 50 ～ 300 | 13 ～ 290 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 6mm(JIS) | 6.5 | 4.5 ～ 6.4 | 5 characters | 50 ～ 300 | 13 ～ 290 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 6mm(JIS) | 7 | 4.9 ～ 6.9 | 5 characters | 50 ～ 300 | 13 ～ 290 | ※Designation by WOS | ||
| 1 | Quote | 10 | -0.01/-0.02 | 8mm(JIS) | 8 | 5.9 ～ 7.9 | 5 characters | 50 ～ 300 | 13 ～ 290 | ※Designation by WOS | ||
| 1 | Quote | 10 | - | 8mm(JIS) | 10 | 7.9 ～ 9.9 | 5 characters | 50 ～ 300 | 13 ～ 290 | ※Designation by WOS | ||
| 1 | Quote | 10 | - | 8mm(JIS) | 12 | 8.9 ～ 11.9 | 5 characters | 50 ～ 300 | 13 ～ 290 | ※Designation by WOS | ||
| 1 | Quote | 10 | - | 8mm(JIS) | 15 | 10.9 ～ 14.9 | 5 characters | 50 ～ 300 | 13 ～ 290 | ※Designation by WOS | ||
| 1 | Quote | 10 | - | 8mm(JIS) | 16 | 11.9 ～ 15.9 | 5 characters | 50 ～ 300 | 13 ～ 290 | ※Designation by WOS | ||
| 1 | Quote | 10 | - | 8mm(JIS) | 20 | 15.9 ～ 19.9 | 5 characters | 50 ～ 300 | 13 ～ 290 | ※Designation by WOS |
Loading...
Basic information
| Material | EN 1.2344 Equiv. | Shaft diameter tolerance (Reference tolerance) | 0/-0.02 | Surface treatment | Nitrided |
|---|---|---|---|---|---|
| Tip shape | No | Character engraving type | Concave character | Gas release shape | No |
Configure
Basic Attributes
-
Tip diameter tolerance (Reference tolerance)
- -0.01/-0.02
-
Head thickness
- 6mm(JIS)
- 8mm(JIS)
-
D (Shaft diameter)(mm)
-
P (Tip diameter)(mm)
-
L (L dimension)(mm)
-
N(mm)
-
Engraving character designation
- ※Designation by WOS
-
Type
- EJSF1M
- EJSF1MR
- EJSF2M
- EJSF2MR
- EJSF3M
- EJSF4M
- EJSF5M
-
Number of engraving characters
- 1 characters
- 2 characters
- 3 characters
- 4 characters
- 5 characters
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.