Înregistrați-vă
Criterii de filtrare
  • Stoc
  • [dr] Inner Diameter(mm)
  • [L] Length (Total)(mm)
  • Material of Outer Cylinder
    • Steel
  • Outer Cylinder Surface Treatment
    • Surface Treatment
  • Grease Coating
    • Grease coating
  • [D] Outer Diameter(mm)
  • Eccentricity(μm)
  • Basic Rated Load, Dynamic Rating(N)
  • CAD
  • Est. zile de expediere
    • Toate
    • Expediere în aceeași zi posibilă
    • În 5 zile lucrătoare
    • În 9 zile lucrătoare
    • În 10 zile lucrătoare
    • În 11 zile lucrătoare
    • În 12 zile lucrătoare
    • În 13 zile lucrătoare
    • În 14 zile lucrătoare
    • În 15 zile lucrătoare
  • Linear ball bearings / flange selectable / stainless steel, steel / treatment selectable / double bush / seal selectable(Lista codurilor de piese: pagina 6)

    Cod piesă:

    S-au găsit. 540 candidați nedefiniți.
    Cantitate:

    Desen de ansamblu și tabel de specificații

    Round Flange
    Square flange
    Compact Flange
    dr = 3 to 13
    dr = 16 to 50
    Counterbored HolesTypeOuter CylinderBallsRetainerOperating Ambient Temperature[A] Accessory
    Round FlangeSquare flangeCompact Flange[M] Material[H] Hardness[S] Surface Treatment[M] Material[M] Material
    Opposite Counterbored HoleLHZRWLHZSWLHZCWEN 1.3505 Equiv.58HRC or moreEN 1.3505 Equiv.Plastic (Duracon M90 Equivalent)−20 to 80°CSeal [M] Material
    Nitrile Rubber
    (-20 to 120°C)
    Standard
    Type
    LHFRWLHFSWLHFCW
    LHFRW−N
    No Seal
    LHFSW−N
    No Seal
    LHFCW−N
    No Seal
    LHFRWFLHFSWFLHFCWFStainless Steel (Stainless Steel)−20 to 110°C
    LHFRWRLHFSWRLHFCWRLow Temperature Black Chrome PlatingEN 1.4125 Equiv.Plastic (Duracon M90 Equivalent)−20 to 80°C
    LHFRWMLHFSWMLHFCWMElectroless Nickel Plating
    LHFRWM−N
    No Seal
    LHFSWM−N
    No Seal
    LHFCWM−N
    No Seal
    LHFRWMFLHFSWMFLHFCWMFStainless Steel (Stainless Steel)−20 to 110°C
    SLHFRWSLHFSWSLHFCWEN 1.4125 Equiv.56HRC or morePlastic (Duracon M90 Equivalent)−20 to 80°C
    SLHFRWSSLHFSWSSLHFCWSStainless Steel (Stainless Steel)−20 to 120°C

    Specification Table

    Part Number  
    Flanged Linear Bushing - Standard, Double: Related Image LHFCW12
    Flanged Linear Bushing - Standard, Double: Related Image LHFCW−N12
    Flanged Linear Bushing - Standard, Double: Related Image LHFCWR10
    Flanged Linear Bushing - Standard, Double: Related Image LHFCWR10L
     

    (No Seal)
    (Low Temperature Black Chrome Plating)
    (L Type Greased)
     

    [ ! ] Alternative grease types available.
    drD ToleranceLHTdd1tP.C.D.WFAEccentricity
    (Max.)
    * 1
    Balls
    Rows
    Perpendicularity
    * 2
    Basic Load RatingAllowable Static
    Moment
    (N⋅m)
    Mass (g)
     Tolerance Surface Treatment
    Not Provided
    Surface Treatment
    Provided
     ToleranceC (Dynamic) NCo (Static) NRound FlangeSquare flangeCompact Flange
    30
    −0.010
    70
    −0.011
    0
    −0.015
    19±0.3193.52.54.52.11315130.01040.0101382100.518.777.7
    4823201416141762540.6311910
    510282553.563.11720172634121.38242021
    6120
    −0.013
    0
    −0.018
    35282022200.0150.0153245292.18312528
    81545322425244317844.31514347
    10190
    −0.016
    0
    −0.021
    554064.57.54.129302958811007.24987890
    12215742323232657120010.911090102
    13236143333433813157011.6130108123
    16287048383722311230235019.7190165182
    200
    −0.012
    320
    −0.019
    0
    −0.025
    805485.595.1434224360.02050.0201400274026.8260225247
    2540112625150324061560314043.4540500525
    304512374106.6116.1605835492490549082.8680590645
    350
    −0.015
    520
    −0.022
    0
    −0.030
    13582676438550.0250.025265062701101020930945
    406015196139148.17875456434308040147157013801423
    508019211698925680608015900397360034003437
    * 1. The maximum amount of misalignment between the center point of the outer diameter D and the center point of the inner diameter dr.
    * 2. Perpendicularity of D to flange mounting surface.
    [ ! ] Anti-rust oil is applied at the time of delivery.
    [ ! ] No seal supplied for dr = 3 or 4.
    [ ! ] There are 2 engraving types for products without seals. Example: Part Number: For LHFRW-N10, it will be either LHFRW-N10 or LHFRW10-N.
    Grease coating
    By selecting the grease below, change to the product with grease coating is available.
    TypeProduct NameMain Features
    A TypeAlvania Grease S2 (by Showa Shell Sekiyu)General-purpose grease suitable for various grease lubrication locations.
    Y TypeAFF (Made by THK Co., Ltd.)Grease with less particles, stable rolling resistance, and excellent fretting resistance.
    G TypeLG2 (Made by NSK Ltd.)Grease with less particles, excellent wear and rust resistance.
    L TypeET-100K (Made by KYODO YUSHI Co., Ltd.)Superior heat resistance and oxidation stability. Also high adhesion and cohesion with limited splash or leakage.
    H TypeFGL (Lubriplate)Suitable for lubrication of equipment used in special hygienic requirements (NSF H-1 Reg. No. 043534)
    [ ! ] Grease coating cannot be selected for the Type without seal.
    Grease Performance Table (Reference Value)
    ItemConditionsUnitMeasurement MethodA TypeY TypeG TypeL TypeH Type
    ThickenerLithium TypeLithium TypeLithium TypeAromatic DiureaAluminum Complex Soap
    Base OilMineral OilFine Synthetic OilMineral Oil + Synthetic Hydrocarbon OilEther Synthetic OilUSP White Oil
    Base Oil
    Kinematic Viscosity
    40°Cmm2/sJIS K2220 2313110032105 (ASTM D-445)
    100°C12.25.411.5 (ASTM D-445)
    Worked PenetrationJIS K2220 7283315199280310 (ASTM D-217)
    Dropping Point°CJIS K2220 8181220201260 <238 (ASTM D-217)
    Evaporation Amount99°C × 22 hrwt%JIS K2220 100.20.71.40.27 (ASTM D−972)
    Oil Separation100°C × 24 hrwt%JIS K2220 112.42.60.81.22.1 (ASTM D−1742)
    Operating Temp.In Air°C-25 to 120-40 to 120−20 to 70−40 to 200−12 to 177
    General Information - Linear Ball Bushings

     

    Linear Ball Bushing Selection Details

    - Inner diameter [dr]: 3 mm – 100 mm
    - Total length [L]: 10 mm – 300 mm
    - Housing material: aluminum, stainless steel (stainless steel), steel
    - Ball material: stainless steel (stainless steel), steel
    - Ball cage material: plastic, stainless steel (stainless steel)
    - Surface treatment: without, chemically nickel-plated, LTBC
    - Radial offset (μm): 50 μm – 4 μm

    At MISUMI, you will find the following linear bearing versions: with locking ring with groove, with dust seal, with lubrication unit (MX), with grease nipple, housing open at the bottom/open, with clearance compensation, with flange, with centred flange, with round flange, with flattened round flange (compact flange), with square flange, with block housing, with wide barrel and ball housing, ball cage guides for linear and rotational movements (limited stroke).

     

    Description/Basics

    Linear ball bushings convert the rolling motion of steel balls (4) into infinite linear motion. They can implement highly precise and low-friction linear motion and can be used in almost all industries, e.g., in systems for semiconductor parts, electronic components and in food packaging.

    Ball recirculating bushings are used in conjunction with linear shafts. The linear movement mechanism uses steel balls (4) for unlimited linear movement.

    Linear bearing units allow linear shafts to travel indefinitely through steel balls that are constantly circulating within the running grooves directed by the outer cylinder and ball cage (3).

    Compared to plain bearings, ball bushings perform linear movements with lower friction and high accuracy. They are used in many applications, such as conveyors and semiconductor manufacturing facilities.

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

     

    Linear Bearing Unit Design - (1) Dust Seal, (2) Outer Cylinder, (3) Ball Cage, (4) Steel Balls

     

    Dynamic friction coefficient in comparison

    DesignDynamic friction coefficient (μ)
    Miniature profile rail guide0.004 ~ 0.006
    Profile rail guide for medium and heavy loads0.002 ~ 0.003
    Cross roller guides0.001 ~ 0.003
    Cross roller tables0.001 ~ 0.003
    Linear ball bearing0.002 ~ 0.003
    Ball cage guides0.0006 ~ 0.0012

    The specified values are for comparison purposes only and are therefore not reference values.

     

    Areas of Application

    Linear ball bushings have a linear working direction and can be used for horizontal or vertical linear movements. Therefore, MISUMI linear ball bushings can be used in almost all industries. Since linear ball bushings are intended only for axial movement, rotational use would lead to premature fatigue or destruction of the ball bushings. For rotary movements, we therefore recommend ball cage guides, which enable not only infinite linear movements (stroke-limited) in addition to infinite rotary movements.

    Common applications are lifting mechanisms or guides for cylinders. The ball bushings are also a good variant for additional guide. In addition, these linear ball bushings are often found in 3D printers, metering systems, measuring devices, positioning and alignment devices, bending devices and sorting systems.

    For systems with increased particle development (e.g., dust and other abrasive particles), the linear systems should be protected with covers or bellows. The ingress of particles leads to a clumping of the lubricating grease or to significantly increased abrasion. By clumping the grease, the balls block in the ball circulation, which results in unscheduled maintenance.

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings
    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

      

    Materials

    Linear ball bearings consist of different materials due to their design and the individual components. MISUMI uses high-quality materials to achieve the longest possible service life. The following materials are available:

    - External cylinder: stainless steel (stainless steel) ~56HRC, steel with ~58HRC
    - Ball: stainless steel (stainless steel), steel
    - Ball cage: plastic, stainless steel (stainless steel)
    - Housing: aluminum, stainless steel (stainless steel), steel
    - Seal: nitrile rubber

    You can find more detailed material information in the tab Technical Drawing.

     

    Coatings

    To protect linear ball bushings from corrosion, the surface can be chemically nickel-plated.

    As an alternative to a chemical nickel-plating, ball bushings can also be coated with LTBC. The LTBC coating (Low Temperature Black Chrome Platinum) is a surface treatment that protects against corrosion and has low reflection. The coating consists of a 5 μm thick chrome ceramic layer with fluoropolymer infusion and it deposits as a black film. In addition, the LTBC coating is crack-proof and interchangeable and is therefore resistant to delamination due to extreme or repeated bending. LTBC-coated linear ball bearings are thus particularly suitable for locations where corrosion or light reflections are undesirable.

    Note: the inner wall of LTBC coated linear bushing units is not surface treated.

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

    LTBC-coated linear ball bushing - state after 50 km glide test under 412N load.

     

    Comparison test of corrosion protection

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

    Salt water spray test according to JIS H8502. Test piece: simple flanged linear ball bushing
    (1) EN 1.3505 equiv., (2) EN 1.4125 equiv., (3) chemically nickel-plated, (4) LTBC coating, (hr = duration in hours)

     

    Instructions for Use / Installation Information - Linear Ball Bushings

     

    Instructions for use

    - MISUMI linear bearings should be used in conjunction with MISUMI linear shafts.
    - We recommend using a hardened linear shaft in the g6 tolerance.
    - An additional hard chrome plating of the linear shaft makes it more wear-resistant.
    - When installing ball bushings in housings, we recommend an H7 housing tolerance. Too close a tolerance will reduce the internal contact travel [dr] to the shaft and can lead to increased wear and premature failure.
    - The utilisation of two ball bushings on a steel shaft improves the shaft guide in a system. However, if the angular errors are too high, a self-aligning linear ball bushing should be selected.
    - When utilising two linear shafts, the drive should be centred in the system to avoid unnecessary stresses/lever effects.
    - The service life, also called nominal service life, should be calculated using the present load case. Here you can perform your service life calculation.
    - Depending on local conditions such as temperature, humidity and gases, a variant made of stainless steel or an LTBC coating is recommended.
    - When the linear shafts bend sharply, a self-aligning/self-adjusting linear ball bushing should be selected.

     

    Installation Information

    General installation instructions for linear ball bushings and linear shafts

    MISUMI linear ball bushings should be used in conjunction with MISUMI linear shafts (hardened, tolerance g6).

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

    MISUMI tolerance range: inner diameter linear ball bushings (LMU) and outer diameter linear shafts (SFJ).

     

    General installation instructions for linear ball bushings and housings

    MISUMI linear ball bushings should be used in conjunction with MISUMI housings (tolerance H7).

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

    MISUMI tolerance range: outer diameter of linear ball bushing and inner diameter of housing.

     

    Standard linear ball bushing installation instructions

    1. When installing standard linear ball bushings, you can use the following locking means: retaining rings (clamping rings), stoppers

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

    (1) retaining rings, (2) housing, (3) stopper/LMST fixing plate

     

    2. Ball bushings are not suitable for rotary motion and applications requiring repetitive insertion and removal of linear shafts. Such a misuse of the linear ball bushing could damage the recirculating ball bushing.

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

     

    3. Simple linear ball bushings are not suitable for large torque loads (offset load/lever effect). The use of double or multiple linear bushings is recommended for these load cases.

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

    (1) Linear ball bushing with two grooves

     

    4. When assembling linear shafts, forceful slanted insertion into the linear ball bushing can cause the ball cage to bend and the balls to fall out. Be sure to centre the steel shaft to the linear ball bushing before inserting the steel shaft into the linear ball bushing.

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

     

    Installation instructions for linear ball bushings with stopper/fixing plate

    Through the stopper plates, the versions can be designed independently of the housing length.

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

    (1) Attachment, (2) linear ball bushing – standard, (3) linear shaft, (4) LMST fixing plate

     

    The stopper plates enable the ball sleeve and linear shaft to be installed flush against the end faces.

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

    (1) Linear shaft, (2) housing, (3) linear ball bushing – standard, (4) spacer sleeve LBS/LBSA for linear ball bushings, (5) LMST fixing plate

     

    The LMST fixing plates can also be used to lock linear bushings in place.

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

    (2) housing, (4) LMST fixing plate

     

    Assembly Instructions for Linear Ball Bushings with Flange and Lubrication Unit MX

    When fastening the linear ball bushing with the lubrication unit MX, do not insert the housing of the lubrication unit as guide as shown in (2), as this can damage the housing. Instead, use the flange and guide version as shown in (3).

    Do not disassemble the linear ball bushing with flange and lubrication unit MX, as this will impair function.

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

     

    Assembly Instructions for Linear Ball Bushings with Housing and without Cylinder Pin Hole

    During interface assembly, centring on the lateral reference surface can be eliminated by means of the cylinder pin holes.

    This reduces the machining effort of the upper plate to be mounted on the block.

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings
    Linear ball bushing with housing
    Positioning with plate end cover
    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings
    Linear ball bushing with housing
    Positioning with cylinder pins

      

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings
    Linear ball bushing with housing (wide version)
    Positioning with plate end cover
    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings
    Linear ball bushing with housing (wide version)
    Positioning with cylinder pins

      

      

    Maintenance - Linear Ball Bushings

     

    General Maintenance Instructions

    Grease the rows of balls inside the ball bushing before use. Then grease regularly during use. Grease reduces friction by forming a layer between the balls and rolling shaft surfaces and prevents seizing. Loss of grease and degradation of grease shorten the service life of linear guides.

    - Recommended grease: lithium soap grease
    - Recommended lubrication interval: every 6 months
    *Every 3 months for extended work or every 1000 km. Maintenance intervals vary depending on the application and ambient conditions.

     

    Lubrication

    Linear ball bushings from MISUMI are delivered coated with a corrosion protection oil. Exceptions to this are the designs with lubrication unit MX. After removing the anti-corrosion oil, we recommend lubricating the bearings.

    If you select one of the following lubricants in the configurator, you can order pre-lubricated versions. The versions L, G and H are prefilled with grease, whereby L and G offer a strong reduction in particle formation by means of a suitable grease distribution during operation (see quantitative comparison of particle formation below). Lubrication units MX are filled with lithium soap grease.

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

     

    Assembly of the lubrication unit MX

    The lubrication unit MX is equipped with a fibre insert with lubricant. The capillary effect allows the lubricant to be properly applied to contact surfaces. For this purpose, a constant oil film is formed between balls and steel shaft, which significantly prolongs the lubrication intervals.

     

    Linear ball bearings - linear bearings - recirculating ball bushing - recirculating ball bushings - linear bearing unit - linear bearing units - ball bushing - ball bushings

    Recirculation ball bushing with lubrication unit - (1) MX Lubrication Unit, (2) MX Lubrication Unit - Plastic Housing, (3) Lubricant Pads, (4) Dust Seal, (5) Balls, (6) Linear Shaft

     

    Properties of the MX lubrication unit

    Longer maintenance intervals: the long-lasting lubricant performance leads to a significant reduction in maintenance, especially in machine and equipment environments where lubrication is difficult to achieve.
    Environment: the MX lubrication unit helps reduce lubricant consumption and thus protects the environment.
    Cost benefit: it contributes to reducing maintenance costs and failure rate caused by failing to lubricate.
    Less effort: it is not necessary to refill the lubricant prior to use, since the ball parts are already filled with a lithium soap-based grease in addition to the lubrication unit.

     

    Comparison test of linear ball bearings and linear ball bearings with lubrication unit

    Test conditions:
    - Sample:
    linear ball bushing LMU12 with rust protection oil and linear ball bushing with lubrication unit LMU-MX12
    - Effective load: 206N (50% of the dynamic load rating of 412N)
    - Average speed: 42 m/min (0.7 m/s)
    - Stroke: 100 m
    - Lubricant: lubricating grease, only initial filling (only LMU-MX12)
    - Shaft material: EN 1.3505 Equiv. (58HRC)
    - Duration: 24-hour continuous operation
    *The above test conditions serve only as reference values and cannot be considered as a manufacturer warranty.

     

    Test result:

    With an effective test load of 50% of the load-carrying capacity of 412N, the design with the MX lubrication unit could achieve a continuous output of 2.5-fold longer than with no MX lubrication unit.
    *Since the 2007 catalogue, the data have been updated after the safety limit has been confirmed by further data from test results.

     

    Linearkugellager - Linearlager - Kugelumlaufbuchse - Kugelumlaufbuchsen - Linearlagereinheit - Linearlagereinheiten - Kugelbuchse - Kugelbuchsen

    Endurance test result - standard linear ball bearing LMU, linear ball bearing LMU-MX with lubricant unit

     

    Supplementary Article

     

    Linear Shaft

    Linearkugellager - Linearlager - Kugelumlaufbuchse - Kugelumlaufbuchsen - Linearlagereinheit - Linearlagereinheiten - Kugelbuchse - Kugelbuchsen

     

    Retaining Ring

    Linearkugellager - Linearlager - Kugelumlaufbuchse - Kugelumlaufbuchsen - Linearlagereinheit - Linearlagereinheiten - Kugelbuchse - Kugelbuchsen

     

    Set Collar / Clamping Ring

    Linearkugellager - Linearlager - Kugelumlaufbuchse - Kugelumlaufbuchsen - Linearlagereinheit - Linearlagereinheiten - Kugelbuchse - Kugelbuchsen

     

    Accessories for Linear Ball Bearing

    Linearkugellager - Linearlager - Kugelumlaufbuchse - Kugelumlaufbuchsen - Linearlagereinheit - Linearlagereinheiten - Kugelbuchse - Kugelbuchsen

     

    Shaft Holder

    Linearkugellager - Linearlager - Kugelumlaufbuchse - Kugelumlaufbuchsen - Linearlagereinheit - Linearlagereinheiten - Kugelbuchse - Kugelbuchsen

     

    Industrial Applications
    3D printer industry
    Linearkugellager - Linearlager - Kugelumlaufbuchse - Kugelumlaufbuchsen - Linearlagereinheit - Linearlagereinheiten - Kugelbuchse - Kugelbuchsen
    Automotive industry
    Linearkugellager - Linearlager - Kugelumlaufbuchse - Kugelumlaufbuchsen - Linearlagereinheit - Linearlagereinheiten - Kugelbuchse - Kugelbuchsen
    Pharmaceutical industry
    Linearkugellager - Linearlager - Kugelumlaufbuchse - Kugelumlaufbuchsen - Linearlagereinheit - Linearlagereinheiten - Kugelbuchse - Kugelbuchsen
    Packaging industry
    Linearkugellager - Linearlager - Kugelumlaufbuchse - Kugelumlaufbuchsen - Linearlagereinheit - Linearlagereinheiten - Kugelbuchse - Kugelbuchsen

    Lista codurilor de piese

    Număr de articole

    RoHS Information

    Features, Areas of Application

    [dr] Inner Diameter

    (mm)

    [L] Length (Total)

    (mm)

    Material of Outer Cylinder

    Outer Cylinder Surface Treatment

    Grease Coating

    [D] Outer Diameter

    (mm)

    Basic Load Rating Dynamic Rating (Detail)

    (N)

    Basic Load Rating Static Rating

    (N)

    Inscribed Circle Diameter Tolerance (Negative Side)

    (mm)

    Eccentricity

    (μm)

    Basic Rated Load, Dynamic Rating

    (N)

    Flange Shape

    Ball Material

    Retainer Material

    Seals

    Counterbored Hole

    RoHS?Cantitate minimă per comandă
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance
    16
    70
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    28
    1230
    2350
    -0.01
    15
    1230
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance
    16
    70
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    [Grease coating] A Type
    28
    -
    2350
    -0.01
    15
    1230
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance
    16
    70
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    28
    1230
    2350
    -0.01
    15
    1230
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance
    16
    70
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    28
    1230
    2350
    -0.01
    15
    1230
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance / Heat-Resistant
    16
    70
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    28
    1230
    2350
    -0.01
    15
    1230
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance
    16
    70
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    [Grease coating] Y Type
    28
    -
    2350
    -0.01
    15
    1230
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance
    20
    80
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    32
    1400
    2740
    -0.012
    20
    1400
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance
    20
    80
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    [Grease coating] A Type
    32
    -
    2740
    -0.012
    20
    1400
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance
    20
    80
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    32
    1400
    2740
    -0.012
    20
    1400
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance
    20
    80
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    32
    1400
    2740
    -0.012
    20
    1400
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance / Heat-Resistant
    20
    80
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    32
    1400
    2740
    -0.012
    20
    1400
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance
    20
    80
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    [Grease coating] Y Type
    32
    -
    2740
    -0.012
    20
    1400
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance
    25
    112
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    40
    1560
    3140
    -0.012
    20
    1560
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    10 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance
    25
    112
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    [Grease coating] A Type
    40
    -
    3140
    -0.012
    20
    1560
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance
    25
    112
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    40
    1560
    3140
    -0.012
    20
    1560
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance
    25
    112
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    40
    1560
    3140
    -0.012
    20
    1560
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance / Heat-Resistant
    25
    112
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    40
    1560
    3140
    -0.012
    20
    1560
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance
    25
    112
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    [Grease coating] Y Type
    40
    -
    3140
    -0.012
    20
    1560
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance
    30
    123
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    45
    2490
    5490
    -0.012
    20
    2490
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance
    30
    123
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    [Grease coating] A Type
    45
    -
    5490
    -0.012
    20
    2490
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance
    30
    123
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    45
    2490
    5490
    -0.012
    20
    2490
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance
    30
    123
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    45
    2490
    5490
    -0.012
    20
    2490
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Corrosion and Chemical Resistance / Heat-Resistant
    30
    123
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    Not Provided
    45
    2490
    5490
    -0.012
    20
    2490
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance
    30
    123
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] Electroless Nickel Plating
    [Grease coating] Y Type
    45
    -
    5490
    -0.012
    20
    2490
    Compact Flange
    EN 1.4125 Equiv.
    Stainless Steel
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    6
    35
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    12
    324
    529
    -0.01
    15
    324
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    6
    35
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    [Grease coating] A Type
    12
    -
    529
    -0.01
    15
    324
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    6
    35
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    12
    324
    529
    -0.01
    15
    324
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    6
    35
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    12
    324
    529
    -0.01
    15
    324
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    6
    35
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    12
    324
    529
    -0.01
    15
    324
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    6
    35
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    [Grease coating] Y Type
    12
    -
    529
    -0.01
    15
    324
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    8
    45
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    15
    431
    784
    -0.01
    15
    431
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    10 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    8
    45
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    [Grease coating] A Type
    15
    -
    784
    -0.01
    15
    431
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    8
    45
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    15
    431
    784
    -0.01
    15
    431
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    8
    45
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    15
    431
    784
    -0.01
    15
    431
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    8
    45
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    15
    431
    784
    -0.01
    15
    431
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    8
    45
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    [Grease coating] Y Type
    15
    -
    784
    -0.01
    15
    431
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    10
    55
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    19
    588
    1100
    -0.01
    15
    588
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    10
    55
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    [Grease coating] A Type
    19
    -
    1100
    -0.01
    15
    588
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    10
    55
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    19
    588
    1100
    -0.01
    15
    588
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    10
    55
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    19
    588
    1100
    -0.01
    15
    588
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    10
    55
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    19
    588
    1100
    -0.01
    15
    588
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    10
    55
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    [Grease coating] Y Type
    19
    -
    1100
    -0.01
    15
    588
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    12
    57
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    21
    657
    1200
    -0.01
    15
    657
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    12
    57
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    [Grease coating] A Type
    21
    -
    1200
    -0.01
    15
    657
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    12
    57
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    21
    657
    1200
    -0.01
    15
    657
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    12
    57
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    21
    657
    1200
    -0.01
    15
    657
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    12
    57
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    21
    657
    1200
    -0.01
    15
    657
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    12
    57
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    [Grease coating] Y Type
    21
    -
    1200
    -0.01
    15
    657
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    13
    61
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    23
    813
    1570
    -0.01
    15
    813
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    13
    61
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    [Grease coating] A Type
    23
    -
    1570
    -0.01
    15
    813
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    13
    61
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    23
    813
    1570
    -0.01
    15
    813
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    13
    61
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    23
    813
    1570
    -0.01
    15
    813
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    13
    61
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    23
    813
    1570
    -0.01
    15
    813
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    13
    61
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    [Grease coating] Y Type
    23
    -
    1570
    -0.01
    15
    813
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    16
    70
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    28
    1230
    2350
    -0.01
    15
    1230
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    16
    70
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    [Grease coating] A Type
    28
    -
    2350
    -0.01
    15
    1230
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    -
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    16
    70
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    28
    1230
    2350
    -0.01
    15
    1230
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    16
    70
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    28
    1230
    2350
    -0.01
    15
    1230
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    16
    70
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    Not Provided
    28
    1230
    2350
    -0.01
    15
    1230
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    10
    1 bucăți
    RoHS Requirements Fulfilled
    Low Dust / Corrosion and Chemical Resistance / Anti-Reflection
    16
    70
    [Steel] EN 1.3505 Equiv.
    [Surface Treatment] LTBC Plating
    [Grease coating] Y Type
    28
    -
    2350
    -0.01
    15
    1230
    Compact Flange
    EN 1.4125 Equiv.
    Plastic (Duracon M90 Equivalent)
    With Seal
    Standard
    -
    1 bucăți
    Preț unitar (fără TVA)(preț unitar cu TVA incluse)
    Dată de expediere standard
    29.26 €
    ( 34.82 € )
    Articol în stoc - 1 zi lucrătoareDisponibil pentru expediere în aceeași zi
    41.06 €
    ( 48.86 € )
    9 zile lucrătoare
    49.77 €
    ( 59.23 € )
    9 zile lucrătoare
    49.77 €
    ( 59.23 € )
    9 zile lucrătoare
    49.77 €
    ( 59.23 € )
    9 zile lucrătoare
    42.69 €
    ( 50.80 € )
    9 zile lucrătoare
    33.84 €
    ( 40.27 € )
    Articol în stoc - 1 zi lucrătoareDisponibil pentru expediere în aceeași zi
    50.92 €
    ( 60.59 € )
    9 zile lucrătoare
    55.35 €
    ( 65.87 € )
    9 zile lucrătoare
    55.35 €
    ( 65.87 € )
    9 zile lucrătoare
    55.35 €
    ( 65.87 € )
    9 zile lucrătoare
    52.86 €
    ( 62.90 € )
    9 zile lucrătoare
    50.21 €
    ( 59.75 € )
    9 zile lucrătoare
    74.52 €
    ( 88.68 € )
    9 zile lucrătoare
    69.24 €
    ( 82.40 € )
    9 zile lucrătoare
    69.24 €
    ( 82.40 € )
    9 zile lucrătoare
    69.24 €
    ( 82.40 € )
    9 zile lucrătoare
    75.33 €
    ( 89.64 € )
    9 zile lucrătoare
    67.64 €
    ( 80.49 € )
    9 zile lucrătoare
    97.55 €
    ( 116.08 € )
    9 zile lucrătoare
    88.14 €
    ( 104.89 € )
    9 zile lucrătoare
    88.14 €
    ( 104.89 € )
    9 zile lucrătoare
    88.14 €
    ( 104.89 € )
    9 zile lucrătoare
    98.81 €
    ( 117.58 € )
    9 zile lucrătoare
    19.02 €
    ( 22.63 € )
    5 zile lucrătoare
    25.10 €
    ( 29.87 € )
    9 zile lucrătoare
    32.68 €
    ( 38.89 € )
    9 zile lucrătoare
    32.68 €
    ( 38.89 € )
    9 zile lucrătoare
    32.68 €
    ( 38.89 € )
    9 zile lucrătoare
    25.47 €
    ( 30.31 € )
    9 zile lucrătoare
    19.02 €
    ( 22.63 € )
    11 zile lucrătoare
    25.71 €
    ( 30.59 € )
    9 zile lucrătoare
    32.68 €
    ( 38.89 € )
    9 zile lucrătoare
    32.68 €
    ( 38.89 € )
    9 zile lucrătoare
    32.68 €
    ( 38.89 € )
    9 zile lucrătoare
    26.23 €
    ( 31.21 € )
    9 zile lucrătoare
    20.95 €8.59 €
    ( 10.22 € )
    Articol în stoc - 1 zi lucrătoareDisponibil pentru expediere în aceeași zi
    29.26 €
    ( 34.82 € )
    9 zile lucrătoare
    34.62 €
    ( 41.20 € )
    9 zile lucrătoare
    34.62 €
    ( 41.20 € )
    9 zile lucrătoare
    34.62 €
    ( 41.20 € )
    9 zile lucrătoare
    29.95 €
    ( 35.64 € )
    9 zile lucrătoare
    21.74 €
    ( 25.87 € )
    5 zile lucrătoare
    30.97 €
    ( 36.85 € )
    9 zile lucrătoare
    42.24 €
    ( 50.27 € )
    9 zile lucrătoare
    42.24 €
    ( 50.27 € )
    9 zile lucrătoare
    42.24 €
    ( 50.27 € )
    9 zile lucrătoare
    31.97 €
    ( 38.04 € )
    9 zile lucrătoare
    23.11 €
    ( 27.50 € )
    5 zile lucrătoare
    33.50 €
    ( 39.87 € )
    9 zile lucrătoare
    43.61 €
    ( 51.90 € )
    9 zile lucrătoare
    43.61 €
    ( 51.90 € )
    9 zile lucrătoare
    43.61 €
    ( 51.90 € )
    9 zile lucrătoare
    34.82 €
    ( 41.44 € )
    9 zile lucrătoare
    29.73 €
    ( 35.38 € )
    Articol în stoc - 1 zi lucrătoareDisponibil pentru expediere în aceeași zi
    43.41 €
    ( 51.66 € )
    9 zile lucrătoare
    50.21 €
    ( 59.75 € )
    9 zile lucrătoare
    50.21 €
    ( 59.75 € )
    9 zile lucrătoare
    50.21 €
    ( 59.75 € )
    9 zile lucrătoare
    45.05 €
    ( 53.61 € )
    9 zile lucrătoare

    Informații detaliate

    Informații de bază