- Grade, Type
- Silicon (SI)
- High Strength Silicon Rubber
- Silicon (SI)
- With or w/o Adhesive
- Thickness T(mm)
- 0.5
- 1
- 2
- 3
- 5
- 10
- 15
- 20
- 30
- Width A(mm)
- 3
- 5
- 10
- 20
- 30
- 40
- 50
- 80
- 100
- 300
- 500
[10-1000/1mm unități] - Length B(mm)
- 300
- 500
[10-1000/1mm unități] - Counterbored Hole Nominal Dia. [Z]
- 3
- 4
- 5
- 6
- 8
- 10
- F(mm)[5-495/0.5mm unități]
- G(mm)[5-495/0.5mm unități]
- Through Hole Nominal Dia. [N]
- 3
- 4
- 5
- 6
- 8
- 10
- CAD
- 2D
- 3D
Plates / SI / high strength / A50, A70 / through hole / adhesive layer (Lista codurilor de piese: pagina 6)
Cod piesă:
candidați nedefiniți.Desen de ansamblu și tabel de specificații
Back to the Category Panels (polyurethane rubber, rubber, foam, felt)
Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)
Open the technical drawing in the new window
Available dimensions and tolerances can be found under the tab More information.
Basic Properties (e.g., material, hardness, coating, tolerance) - Panels (polyurethane rubber, rubber, foam, felt)
| A Selectable Type | A, B Configurable Type | Material | Hardness | Color | ||
| No Adhesive | Adhesive | No Adhesive | Adhesive | |||
| RBSM | RBSMA | RBSMF | RBSMFA | Silicon Rubber (SI) | Shore A70 | Light Gray |
| RBAM | RBAMA | RBAMF | RBAMFA | Silicon Rubber (SI) | Shore A50 | Milky White |
| RBHSM | RBHSMA | RBHSMF | RBHSMFA | High Strength Silicon Rubber (SI) | Shore A50 | Ivory |
For Adhesive Strength Data, see Here(ADTS).
The milky white color of silicone rubber shore A 50 is translucent.
Temperature limit for seals is 80°C.
Further specifications can be found under the tab More information.
Composition of a Product Code - Panels (polyurethane rubber, rubber, foam, felt)
| Part Number | - | A |
| RBSMA15 | - | 300 |
| Part Number | - | A | - | B | - | F | - | G | - | Screw Nominal Dia. |
| RBSMF10 | - | 110 | - | 65 | ||||||
| RBHSMFA4H5 | - | 200 | - | 150 | - | F140 | - | G100 | - | N5 |
Alterations - Panels (polyurethane rubber, rubber, foam, felt)
General Information - Panels (polyurethane rubber, rubber, foam, felt)
_-_Sortiment.jpg)
Selection details of panels (polyurethane rubber, rubber, foam, felt)
- Material: polyurethane rubber (PU/PUR), heat-resistant polyurethane rubber, low-impact polyurethane rubber, abrasion-resistant polyurethane rubber, antistatic polyurethane, nitrile (NBR), chloroprene rubber (CR), polyethylene (EPDM), silicone (SI), fluorine (FPM), butyl rubber (IIR), natural rubber (NR), hard rubber, special synthetic rubber, polyurethane foam, head-insulating foam, polyethylene foam, low-rebound foam
- Thickness (mm): 0.5 to 50
- Width (mm): 3 to 500
- Length (mm): 10 to 2000
Description/Basics
Foam plates and rubber plates are provided for damping or for sound proofing. MISUMI offers these in various Shore hardening for a wide variety of tasks. Due to the variety of materials, different resistances to environmental influences are possible depending on the application. The foam plates reduce sound in machines and can reduce the sound emissions of a system. For more information on foam characteristics, follow this link.
Rubber plates or foam plates are also suitable in conveyor systems to absorb components to be transported at a dampened level or to protect them from damage as a lateral guide when the components bump into each other. Hard rubber panels or low-impact rubber or foam panels reduce the impact energy of the components. These minimize and lower the vibrations in an application.
In addition, MISUMI offers highly abrasion-resistant polyurethane (Vulkollan), which has an abrasion resistance that is six times higher than with conventional polyurethane.
Ceramic polyurethane plates contain ceramic particles. After machining, these can have a smooth surface despite low Shore hardness.
The polyurethane rubber plates are also available antistatically. The specific resistance of antistatic polyurethane plates prevents static charging. This prevents any damage to electronic components.
For applications with higher temperatures, MISUMI offers heat-resistant polyurethane rubber, which can withstand a temperature range of up to approx. ~120°C (see the product specifications for exact information).
MISUMI also offers low-friction and anti-friction rubber plates. Low-friction rubber plates are often used in the gentle component guide for belt conveyors and roller conveyors.
Felt plates have the property of absorbing or dispensing oil and other liquids via the capillary effect. This property can be used to remove, for example, excess oil on a belt conveyor.
In addition, MISUMI offers rubber plates and foam plates that are self-adhesive for simplified assembly. Furthermore, you will find double-adhesive tape for attaching rubber plates and foam plates.
Additional properties on foam panels and rubber plates can be found in the Properties PDF.
MISUMI also offers these products in a round shape as discs and sleeves made of rubber, natural rubber, foam and felt.
Application Examples - Panels (polyurethane rubber, rubber, foam, felt)
Application example
(1) Low-friction rubber plate (2) belt conveyor
Application example
(1) Vibration damping plate
Industrial Applications
Lista codurilor de piese
| Cod piesă |
|---|
Preț unitar (fără TVA)(preț unitar cu TVA incluse) | Dată de expediere standard |
|---|
76.80 € ( 91.39 € ) | 6 zile lucrătoare |
152.41 € ( 181.37 € ) | 6 zile lucrătoare |
132.57 € ( 157.76 € ) | 7 zile lucrătoare |
330.32 € ( 393.08 € ) | 7 zile lucrătoare |
175.60 € ( 208.96 € ) | 7 zile lucrătoare |
443.42 € ( 527.67 € ) | 7 zile lucrătoare |
239.56 € ( 285.08 € ) | 7 zile lucrătoare |
664.81 € ( 791.12 € ) | 7 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
- ( - ) | 6 zile lucrătoare |
Informații detaliate
Informații de bază
Desen de ansamblu și specificații
Back to the Category Panels (polyurethane rubber, rubber, foam, felt)
Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)
Open the technical drawing in the new window
Specification Tables - Panels (polyurethane rubber, rubber, foam, felt)
T Tolerance
| T | Tolerance |
| 0.5 | ±0.2 |
| 1~3 | ±0.3 |
| 5 | ±0.4 |
| 10 | ±0.6 |
| 15~30 | -0.5~+2.0 |
A, B Tolerance
| A, B | Tolerance |
| 200 or Less | ±0.5 |
| 201~300 | ±1.0 |
| 301~500 | ±1.5 |
■ Features of High Strength Silicon Rubber
Excels in tear strength compared with general silicon rubber.
Comparison of Tear Strength
(N/mm)
| Silicon Rubber (Shore A70) | 7 |
| Silicon Rubber (Shore A50) | 10 |
| High Strength Silicon Rubber (Shore A50) | 32 |
| Nitrile Rubber (Shore A70) | 20 |
■ Square Type
| Part Number | A Selection | ||
| Type | T | ||
| No Adhesive RBSM RBAM *RBHSM | Adhesive RBSMA RBAMA *RBHSMA | 0.5 | 3 5 10 20 30 40 50 80 100 |
| *1 | |||
| *2 | |||
| *3 | |||
| *5 | |||
| *10 | |||
■ Band Type
| Part Number | 1mm Increment | |||
| Type | T | A | B | |
| No Adhesive RBSMF RBAMF *RBHSMF | Adhesive RBSMFA RBAMFA *RBHSMFA | 0.5 | 10~500 | 10~500 |
| *1 | ||||
| *2 | ||||
| *3 | ||||
| *5 | ||||
| *10 | ||||
| 15 | ||||
| 20 | ||||
| 30 | ||||
L dimension is 500mm.
■ A, B Configurable - Standard Typee
| Part Number | A Selection | ||
| Type | T | ||
| No Adhesive RBSM RBAM *RBHSM | Adhesive RBSMA RBAMA *RBHSMA | 0.5 | 300 500 |
| *1 | |||
| *2 | |||
| *3 | |||
| *5 | |||
| *10 | |||
| 15 | |||
| 20 | |||
| 30 | |||
■ A, B Configurable - Hole Type
| Part Number | 1mm Increment (A≥B≥T) | 0.5mm Increment | Screw Nominal Dia. Selection | |||||||||||
| Type | Nominal | T | A | B | F | G | N (Through Hole) | Z (Counterbored Hole) | ||||||
| No Adhesive RBSMF RBAMF *RBHSMF | Adhesive RBSMFA RBAMFA *RBHSMFA | 1H 2H 3H 4H 6H | 0.5 | 25~500 | 25~500 | 5~495 (1H Type) 9~491 (2H, 4H Types) 9~245 (3H, 6H Types) | 5~495 (1H, 2H, 3H Types) 9~491 (4H, 6H Types) | 3 4 5 6 8 10 | - | |||||
| *1 | - | |||||||||||||
| *2 | - | |||||||||||||
| *3 | - | |||||||||||||
| *5 | - | |||||||||||||
| *10 | 3 | 4 | ||||||||||||
| 15 | 4 | 5 | 6 | 8 | ||||||||||
| 20 | 4 | 5 | 6 | 8 | ||||||||||
| 30 | 4 | 5 | 6 | 8 | 10 | |||||||||
Dimension F Specification Range: For 1H: d(d1)/2+2.5≤F≤A-d(d1)/2-2.5; for 2H, 4H: d(d1)+5≤F≤A-d(d1)-5, for 3H, 6H: d(d1)+5≤F≤A/2-d(d1)/2-2.5.
Dimension G Specification Range: For 1H, 2H, 3H: d(d1)/2+2.5≤G≤B-d(d1)/2-2.5, for 4H, 6H: d(d1)+5≤G≤B-d(d1)-5. (d for through holes, d1 for counterbored holes.)
Alterations - Panels (polyurethane rubber, rubber, foam, felt)