One-Touch Couplings for Clean Applications / 90 Deg. Union Elbows (PPCL12)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: PPCL12
Brand: MISUMI
Price: 12.72 €
Delivery time: 5 Days
Technical Data:
Tube O.D. D (D1): 12 Ø
- Order quantities extended (D-JIT)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
PPCL12
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
[M]Material: Polypropylene
Specification Table
| Part Number |
| PPCL4 |
| Part Number | B | P | E | d | F | Mass (g) | Effective Sectional Area (mm2) | |
| Type | D | |||||||
| PPCL | 4 | 22 | 10 | 17 | 3.2 | 6.5 | 4.5 | 4.2 |
| 6 | 26.5 | 12.5 | 20.2 | 3.2 | 8 | 6 | 10 | |
| 8 | 30 | 15 | 22.4 | 4.2 | 10 | 9 | 16.5 | |
| 10 | 35.2 | 17.5 | 26.4 | 4.2 | 12 | 14 | 30 | |
| 12 | 40.1 | 21 | 29.6 | 4.2 | 14 | 20 | 47 | |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| PPCL12 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Tube O.D. D (D1) (Ø) | |
|---|---|---|---|---|---|---|
12.72 € | 1 | Available | 5 Days | 10 | 12 |
Loading...
Specifications / Overview
- Clean environment compatible polypropylene (PP) is used for the main body.
- Plastic body is semitransparent so that fluid can be confirmed from the outside.
- For water or fluid, Inserts for Soft Tubes (Here, PUIT / PUSIT) must be used. Keep the surge pressure to below max. pressure rating.
- If threaded portion is made of PP, tighten coupling by screwing hand tight, then giving 2 or 3 turns with a wrench.
Over tightening may damage threads. Insufficient tightening may cause loosening or leaking. - Due to creep deformation, screws may become loose and minute leakages may occur. Periodical tightening maintenance is recommended.
If retightening does not work, then replace the coupling in use. - If there is a possibility of machine and equipment damage due to fluid leakages, consider providing protective measures such as covers prior to use.
- No oil permitted.
| ■ Specifications | ■ Structure Diagram | ||||||||
|  [Recommended Tightening Torque] Screw Main Body: Polypropylene R1/8:0.5 N⋅m, R1/4:0.7 N⋅m, R3/8:1.0 N⋅m Screw Main Body: EN 1.4301 Equiv. R1/8: 7 to 9 N⋅m, R1/4: 12 to 14 N⋅m, R3/8: 22 to 24 N⋅m (The values are for seal tape 2 rotations. Retighten by up to 2 additional rotations if required.) |
Basic information
| Type | Single-Action Coupling | Fitting Type | Union, Equal Dia. | Applicable Fluid | Water / Air / Chemical |
|---|---|---|---|---|---|
| Main Body Material | Polypropylene | Application | Clean | Thread Material | No Thread |
| Seal Material | Ethylene Propylene Rubber (EPDM) | Union: Same Diameter | Union Elbows | Operating Temperature Range(°C) | 0::80 |
This page is One-Touch Couplings for Clean Applications / 90 Deg. Union Elbows, part number PPCL12.
You can find the detail information about specifications and dimensions on part number PPCL12.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| PPCL10 |
| PPCL4 |
| PPCL6 |
| PPCL8 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | RoHS | Tube O.D. D (D1) (Ø) |
|---|---|---|---|---|---|---|
10.33 € | 1 | Available | 5 Days | 10 | 10 | |
7.43 € | 1 | Available | 5 Days | 10 | 4 | |
7.67 € | 1 | Available | 5 Days | 10 | 6 | |
8.68 € | 1 | Available | 5 Days | 10 | 8 |
Complementary Products
MISUMI Unit еxample related to this product
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.