Criterii de filtrare
- Hole Machining
- A(mm)[20-500/1mm unități]
- B(mm)[20-300/1mm unități]
- F(mm)[6-491.5/0.5mm unități]
- G(mm)[4.5-295.5/0.5mm unități]
- T(mm)
- 0.5
- 1
- 1.5
- 2
- Through Hole Nominal Dia. [N]
- 3
- 4
- 5
- 6
- 8
- 10
- CAD
- 2D
- 3D
Resin Sheets / Resin Films
Cod piesă:
candidați nedefiniți.Desen de ansamblu și tabel de specificații
| Type | Material | Grade | Color | Light Transmittance | Operating Ambient Temperature |
| ACSH | Acrylic | Standard | Transparent | 93% | -30~80°C |
| PCTSH | Polycarbonate | Transparent | 90% | -30~100°C | |
| PYSH | PET | Transparent | 87% | -15~55°C | |
| PASH | Polyacetal | White | - | -45~95°C | |
| UPSH | Ultra High-Molecular-weight Polyethylene | Milky White | -100~80°C |
Specifications
■ Standard Type
■ Pre-drilled Type
| Part Number | - | A | - | B | - | T |
| ACSH | - | 150 | - | 118 | - | 1.0 |
| Part Number | - | A | - | B | - | T | - | F | - | G | - | Screw Nominal Dia. |
| ACSH2H | - | 50 | - | 25 | - | 1.5 | - | F34 | - | G10 | - | N4 |
■ Standard Type
• T Dimension Tolerance
■ Pre-drilled Type
T1.0 and 2.0 are not available for PYSH. Use PYA on P.958 instead.
Dimension F Specification Range: For 2H and 4H, d(d1)+2.5≤F≤A-d(d1)-5; for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
PASH and UPSH have camber caused by manufacturing process.
| Part Number | 1mm Increment | T Selection | |||
| Type | A | B | ACSH PCTSH PASH | PYSH | UPSH |
| ACSH PCTSH PYSH PASH UPSH | 20~300 | 20~300 | 0.5 1.0 1.5 2.0 | 0.5 1.5 | 1.0 2.0 |
| T | ACSH | PCTSH | UPSH |
| PYSH | PASH | ||
| 0.5 | ±0.1 | - | |
| 1.0 | ±0.12 | -0.2~+0.7 | |
| 1.5 | ±0.2 | - | |
| 2.0 | -0.2~+0.5 | ||
| Part Number | 1mm Increment | T Selection | 0.5mm Increment | Screw Nominal Dia. Selection | |||||
| Type | Number of Holes | A | B | ACSH PCTSH PASH | PYSH | UPSH | F | G | N (Through) |
| ACSH PCTSH PYSH PASH UPSH | 2H 4H 6H | 20~300 | 20~300 | 0.5 1.0 1.5 2.0 | 0.5 1.5 | 1.0 2.0 | 6~291.5 (2H, 4H) 6~145.5 (6H) | 4.5~295.5 (2H) 6~291.5 (4H, 6H) | 3 4 5 6 8 10 |
Dimension F Specification Range: For 2H and 4H, d(d1)+2.5≤F≤A-d(d1)-5; for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
PASH and UPSH have camber caused by manufacturing process.
Alterations
Lista codurilor de piese
Număr de articole
| Cod piesă |
|---|
Preț unitar (fără TVA)(preț unitar cu TVA incluse) | Dată de expediere standard |
|---|
- ( - ) | 7 zile lucrătoare |
- ( - ) | 9 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 9 zile lucrătoare |
Informații detaliate
Informații de bază
Thin plates from 0.5 to 2.0 mm can be specified in 1 mm increments.
Atenție
- TYPE：UPSH(Ultra High-Molecular-weight Polyethylene)
Starting with orders received on June 3, 2024, the plate thickness tolerances will be changed in accordance with a revision to the finishing standards of the base material.
Please check this before placing an order.
Before change: -0.2/+0.5 >> After change: -0.2/+0.7. - Please check the content on our website as the PDF does not contain the most up-to-date information.