Înregistrați-vă
Criterii de filtrare
  • Finish Method
    • Thickness T(mm)
    • Length A(mm)

      When entering the width value, make sure that A>B.

        [25-1200/1mm unități]
      • Width B(mm)

        When entering the width value, make sure that A>B.

      • Type
      • CAD
      • Est. zile de expediere
        • Toate
        • În 7 zile lucrătoare
        • În 10 zile lucrătoare

      Metal plates / milled, rotary ground surface / A configurable / EN 1.0038 Equiv.

      Cod piesă:

      S-au găsit. 2 candidați nedefiniți.
      Cantitate:

      Desen de ansamblu și tabel de specificații

      Back to the Category Material Plates, Blocks

      Technical Drawing - Metal Ingots

      EN 1.0038 Equiv. Plates/1 Configurable Dimension/Economy:Related Image
      Open the technical drawing in the new window

      Available dimensions and tolerances can be found under the tab More Information.
       

      Basic Properties (e.g., material, hardness, coating, tolerance) - Metal Ingots


      Material: EN 1.0038 Equiv.
       
      Part NumberFinish MethodSize
      SSA6-Surface Milled Upper-Lower Surface Rotary GrindingStandard
      SST6F6-Surface MilledLarge
      SST6-Surface Milled Upper-Lower Surface Rotary Grinding
      ToleranceA, B~99mm100~250251~
      ±0.2±0.25±0.4
       
      ■Precision Standards (Max. Value)
      ItemSST6FSSA, SST
      Thickness Parallelism (per 100mm)0.050.012
      Flatness
      (per 100mm)
      T5, 6-0.05
      T8~150.070.03
      T16~250.050.015
      T28~0.050.012
      Perpendicularity of Datum Plane0.015 or less per 100mm
      Circumference ChamferingC0.5~C1.0

      Further specifications can be found under the tab More Information .
       

      Composition of a Product Code - Metal Ingots

      Part Number-A-B-T
      SSA-100-100-  8  
       

      Alterations - Metal Ingots

      EN 1.0038 Equiv. Plates/1 Configurable Dimension/Economy:Related Image

      General Information - Metal Ingots

       

      Selection details of flat steels/plates (metal)

      - Material: aluminum, steel, tool steel, pre-hardened steel, stainless steel (stainless steel), copper, titanium

      - Surface treatment: milled, front-polished, flat-polished

      - Heat treatment: annealed, normal annealed, pre-hardened, tempered, half hard, quarter hard

      - Length [A]: 6 to 3000 mm in 0.01 mm increments

      - Width [B]: 6 to 1500 mm in 0.01 mm increments

      - Thickness [T]: 1.5 to 100 mm in 0.01 mm increments

      - Parallelism: up to 0.01/100 mm

      - Evenness: up to 0.01/100 mm

      - Perpendicularity: up to 0.02/100 mm

       

      Description/Basics

      The metal plates from MISUMI are semi-finished products and are often used in the industry for further processing.
      These can be selected in the MISUMI online shop in different versions. The machining of the lateral surfaces, or rolled, milled or ground at the top and the bottom, is available for the metal plate. The metal plates are available in various tolerances. This usually depends on the respective surface machining. This allows you to configure the MISUMI metal plates to suit your needs and use them as a semi-finished product for further processing. A customized metal block or metal plate can help to reduce the number of work steps in your further processing of the metal plate.
      The metal plates can therefore be used well as semi-finished products for further processing, or often serve as a base plate for substructures, as well as column guide frames.

      An overview of the different metal plates can be found in the PDF Metal Plate Overview.

      You can find other shapes and materials of the semi-finished products by following this link.

      MISUMI also offers the service to manufacture metal plates according to your needs with meviy by uploading CAD data.

       

      Aluminum Plate

      The aluminum plate as a blank or raw material from MISUMI is light compared to other materials, but stable and shock resistant. Therefore, the material aluminum is very often used as a Aluminium Extrusions in plant and mechanical engineering.
      Aluminum plates exhibit good corrosion resistance despite the lack of surface treatment. In principle, aluminum forms an oxide layer that prevents further corrosion. Aluminum plates are very good for further processing.

       

      Steel Plate

      Steel plates made of structural steel are inexpensive in terms of their ratio and also economical due to their good workability.
      The steel plate offers high strength and density. Steel has long been a very common material, so there are many types of steel suitable for different technical requirements.
      Alloy tool steel has a higher temperature resistance, resistance, and hardness than usual structural steel. Another major advantage of this steel plate is the possibility of hardening and remuneration of the material.
      One disadvantage of steel plates is the rather poor corrosion resistance. Without a subsequent surface treatment, steel tends to quickly corrode.

       

      Stainless Steel Plate

      The MISUMI stainless steel plates have good to very good corrosion resistance, which makes the material durable. MISUMI offers various stainless steel plates for a wide variety of requirements in plant and mechanical engineering.
      The surface of stainless steel can be visually refined by sanding or polishing. Stainless steel plates have good temperature resistance, but stainless steel can stain at high temperatures (tempering colour). This should be taken into account for welding joints.
      Stainless steels with chrome-nickel content have an antibacterial effect and offer a poor substrate for germs when polished, which also makes the stainless steel plate hygienic.

       

      Copper Plate/Brass Plate

      The copper plate has very good thermal conductivity and electrical conductivity. This represents a special feature for other materials. Copper plates also have good corrosion resistance and are resistant.
      MISUMI offers various copper alloys in its product range. The most commonly used copper is cold-solidified copper due to its good electrical conductivity and thermal conductivity.
      Another variant of the copper plate is MISUMI made of oxygen-free copper, which is also known as pure copper. Oxygen-free copper has good resistance to hydrogen embrittlement and is often used in the electrical industry.
      Chrome copper plates offer good mechanical strength and abrasion resistance at high temperatures.
      The brass plate, on the other hand, offers high strength and ductility. Therefore, brass permits plastic deformation before the material has a fatigue fracture.

       

      Titanium Plate

      Titanium plates from MISUMI can be referred to as pure titanium.
      The titanium plate is light, but it has a high strength and very high corrosion resistance. Titanium plates also have very good biocompatibility. Since the titanium plates are also biologically compatible, this material is frequently represented in medical technology. Due to its low weight and high strength, titanium is also often used in lightweight construction such as aerospace and aviation. The possible application spectrum of titanium is large. However, titanium plates are usually only used if the properties such as strength of aluminum, for example, are no longer sufficient. The reason for this is that titanium is more cost-intensive in comparison, since production causes a high energy consumption. However, the combination of the good properties of titanium is required for many applications and applications.

      Additional properties of the various materials can be found in the PDF of the Metal Plate Properties.

       

      On-demand Manufacturing

      Meviy

      With meviy, MISUMI also offers to manufacture metal plates and sheet metal according to your wishes. Simply upload the CAD data.

       

      Industrial Applications

      3D printer industry
      Automotive industry
      Pharmaceutical industry
      Packaging industry

      Lista codurilor de piese

      Număr de articole

      Finish Method

      Thickness T

      (mm)

      Length A

      (mm)

      Width B

      (mm)

      RoHS?Cantitate minimă per comandă
      Upper-Lower Surface Rotary Grinding (4F2RG)
      5 ~ 50
      25 ~ 500
      25 ~ 300
      10
      1 bucăți
      Upper-Lower Surface Rotary Grinding (4F2RG)
      10 ~ 30
      301 ~ 1200
      125 ~ 800
      10
      1 bucăți
      Preț unitar (fără TVA)(preț unitar cu TVA incluse)
      Dată de expediere standard
      -
      ( - )
      7 zile lucrătoare
      -
      ( - )
      10 zile lucrătoare

      Informații detaliate

      Informații de bază

      [Features] These are sheets with specified length dimensions. [Material] EN 1.0038 Equiv.

      Desen de ansamblu și specificații

      Back to the Category Material Plates, Blocks

      Technical Drawing - Metal Ingots

      Specification Tables - Metal Ingots

       
      ■Standard
      ■6-Surface Milled Upper-Lower Surface Rotary Grinding
      Part NumberA: 1mm IncrementT
      B
      5, 68, 91012, 1315, 1619, 202225283034, 354050
      SSA25~ 5025             
      51~ 75             
      76~ 100             
      101~ 250             
      30~ 5040             
      51~ 75             
      76~ 100             
      101~ 200             
      201~ 500             
      30~ 5060             
      51~ 75             
      76~ 100             
      101~ 200             
      201~ 500             
      30~ 5080             
      51~ 75             
      76~ 100             
      101~ 200             
      201~ 500             
      30~ 50100             
      51~ 75             
      76~ 100             
      101~ 200             
      201~ 500             
      50~ 75125             
      76~ 100             
      101~ 125             
      126~ 200             
      201~ 500             
      101~ 200150             
      201~ 500             
      101~ 200160             
      201~ 500             
      101~ 200200-            
      201~ 500-            
      101~ 200250-            
      201~ 500-            
      101~ 200300-            
      201~ 500-            
      ■Large
      ■6-Surface Milled
      Part NumberA: 1mm IncrementT
      B
      101213151620222530
      SST6F501~ 800125         
      501~ 800150         
      501~ 800160         
      501~ 800200         
      501~ 800250         
      501~ 800300         
      301~ 800350         
      801~ 1200         
      351~ 800400         
      801~ 1200         
      401~ 800450         
      801~ 1200         
      451~ 800500         
      801~ 1200         
      501~ 800600         
      801~ 1200         
      601~ 800800         
      801~ 1200         

      ■6-Surface Milled Upper-Lower Surface Rotary Grinding
      Part NumberA: 1mm IncrementT
      B
      101213151620222530
      SST501~ 800125         
      501~ 800150         
      501~ 800160         
      501~ 800200         
      501~ 800250         
      501~ 800300         
      301~ 800350         
      801~ 1200         
      351~ 800400         
      801~ 1200         
      401~ 800450         
      801~ 1200         
      451~ 800500         
      801~ 1200         
      501~ 800600         
      801~ 1200         
      601~ 800800         
      801~ 1200         
       

      Alterations - Metal Ingots

      EN 1.0038 Equiv. Plates/1 Configurable Dimension/Economy:Related Image