Rotary axes / internal thread / keyways / machining selectable

Click on this image to zoom in.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Rotary Shafts/One End Tapped with Key Grooves:Related Image

Type		D Tolerance	Material	Surface Treatment
	SFMKRT	h9 (Cold-drawn)	EN 1.1191 Equiv.	Black Oxide
	PSFMKRT		EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFMKRT		EN 1.4301 Equiv.	-
	SFHKRT	h7 (Ground)	EN 1.1191 Equiv.	Black Oxide
	PSFHKRT		EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFHKRT		EN 1.4301 Equiv.	-
	SFGKRT	g6 (Ground)	EN 1.1191 Equiv.	Black Oxide
	PSFGKRT		EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFGKRT		EN 1.4301 Equiv.	-

Specifications

	Part Number	-	L	-	M	-	Keyway			-	Keyway			-	Keyway

							KA	-	A		KB	-	B		KC	-	C
1 Keyway 2 Keyways 3 Keyways	SFMKRT10 SFHKRT30 SFGKRT25	- - -	325 300 350	- - -	M4 M10 M8	- - -	KA20 KA20 KA10	- - -	A50 A50 A60	- -	KB120 KB90	- -	B20 B30	-	KC210	-	C30

h9 (Cold-drawn)

Part Number			L=0.1mm Increment	M (Coarse) Selection									Keyway	Keyway	Keyway
Type	D_h9												KA, A	KB, B	KC, C
Type		Tolerance											1mm Increment
SFMKRT PSFMKRT SSFMKRT (D6 is not available for SSFMKRT.)	6	0 -0.030	20.0~300.0	(3)	(4)								KA+A≤L KA≥0 b≤A≤100	KB+B≤L KB≥KA+A+2 b≤B≤100	KC+C≤L KC≥KB+B+2 b≤C≤100
	8	0 -0.036	20.0~400.0	(3)	(4)	(5)	(6)
	10	0 -0.036	20.0~500.0		4	(5)	(6)
	12	0 -0.043	30.0~600.0			5	(6)	(8)
	15	0 -0.043	30.0~700.0			5	6	(8)
	20	0 -0.052	40.0~800.0			5	6	8	10
	25		50.0~800.0			5	6	8	10	12
	30		60.0~800.0					8	10	12	16
	35	0 -0.062	70.0~800.0					8	10	12	16	20

M Sizes in ( ) is selectable when KA≥Mx2.

h7 (Ground)

Part Number			L=0.1mm Increment	M (Coarse) Selection											Keyway	Keyway	Keyway
Type	D_h7														KA, A	KB, B	KC, C
Type		Tolerance													1mm Increment
SFHKRT PSFHKRT SSFHKRT	6	0 -0.012	20.0~300.0	(3)	(4)										KA+A≤L KA≥0 b≤A≤100	KB+B≤L KB≥KA+A+2 b≤B≤100	KC+C≤L KC≥KB+B+2 b≤C≤100
	8	0 -0.015	20.0~400.0	(3)	(4)	(5)	(6)
	10	0 -0.015	20.0~500.0		4	(5)	(6)
	12	0 -0.018	30.0~600.0			5	(6)	(8)
	15		30.0~700.0			5	6	(8)
	17		40.0~800.0			5	6	(8)	(10)	(12)
	20	0 -0.021	40.0~800.0			5	6	8	(10)	(12)	(16)
	25		50.0~800.0			5	6	8	10	12	(16)
	30		60.0~800.0					8	10	12	16
	35	0 -0.025	70.0~800.0					8	10	12	16	20
	40		80.0~800.0							12	16	20	24
	50		100.0~800.0								16	20	24	30

M Sizes in ( ) is selectable when KA≥Mx2.

g6 (Ground)

Part Number			L=0.1mm Increment	M (Coarse) Selection											Keyway	Keyway	Keyway
Type	D_g6														KA, A	KB, B	KC, C
Type		Tolerance													1mm Increment
SFGKRT PSFGKRT SSFGKRT (D13, 16, 18 and 22 are not available for SSFGKRT.)	6	-0.004 -0.012	20.0~300.0	(3)	(4)										KA+A≤L KA≥0 b≤A≤100	KB+B≤L KB≥KA+A+2 b≤B≤100	KC+C≤L KC≥KB+B+2 b≤C≤100
	8	-0.005 -0.014	20.0~400.0	(3)	(4)	(5)	(6)
	10	-0.005 -0.014	20.0~500.0		4	(5)	(6)
	12	-0.006 -0.017	30.0~600.0			5	(6)	(8)
	13		30.0~600.0			5	6	(8)
	15		30.0~700.0			5	6	(8)
	16		30.0~800.0			5	6	8	(10)
	17		40.0~800.0			5	6	8	(10)	(12)
	18		40.0~800.0			5	6	8	(10)	(12)
	20	-0.007 -0.020	40.0~800.0			5	6	8	10	(12)	(16)
	22		40.0~800.0			5	6	8	10	12	(16)
	25		50.0~800.0			5	6	8	10	12	(16)
	30		60.0~800.0					8	10	12	16
	35	-0.009 -0.025	70.0~800.0					8	10	12	16	20
	40		80.0~800.0							12	16	20	24
	50		100.0~800.0								16	20	24	30

M Sizes in ( ) is selectable when KA≥Mx2.

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
PSFHKRT6-[15-400/0.1]-M[2.6,3,4]-KA[0-400/0.1]-A[2-150/0.1]
PSFHKRT6-[15-400/0.1]-MD[2.6,3,4]-KA[0-400/0.1]-A[2-150/0.1]
PSFHKRT8-[15-500/0.1]-M[2.6,3,4,5,6]-KA[0-500/0.1]-A[3-150/0.1]
PSFHKRT8-[15-500/0.1]-MD[2.6,3,4,5,6]-KA[0-500/0.1]-A[3-150/0.1]
PSFHKRT10-[15-600/0.1]-M[3,4,5,6]-KA[0-600/0.1]-A[3-150/0.1]
PSFHKRT10-[15-600/0.1]-MD[3,4,5,6]-KA[0-600/0.1]-A[3-150/0.1]
PSFHKRT12-[15-700/0.1]-M[4,5,6,8]-KA[0-700/0.1]-A[4-150/0.1]
PSFHKRT12-[15-700/0.1]-MD[4,5,6,8]-KA[0-700/0.1]-A[4-150/0.1]
PSFHKRT15-[15-800/0.1]-M[4,5,6,8,10]-KA[0-800/0.1]-A[5-150/0.1]
PSFHKRT15-[15-800/0.1]-MD[4,5,6,8,10]-KA[0-800/0.1]-A[5-150/0.1]
PSFHKRT17-[30-900/0.1]-M[4,5,6,8,10,12]-KA[0-900/0.1]-A[5-150/0.1]
PSFHKRT17-[30-900/0.1]-MD[4,5,6,8,10,12]-KA[0-900/0.1]-A[5-150/0.1]
PSFHKRT20-[30-1000/0.1]-M[4,5,6,8,10,12,16]-KA[0-1000/0.1]-A[6-150/0.1]
PSFHKRT20-[30-1000/0.1]-MD[4,5,6,8,10,12,16]-KA[0-1000/0.1]-A[6-150/0.1]
PSFHKRT25-[50-1000/0.1]-M[4,5,6,8,10,12,16]-KA[0-1000/0.1]-A[8-150/0.1]
PSFHKRT25-[50-1000/0.1]-MD[4,5,6,8,10,12,16]-KA[0-1000/0.1]-A[8-150/0.1]
PSFHKRT30-[60-1000/0.1]-M[6,8,10,12,16,20]-KA[0-1000/0.1]-A[8-150/0.1]
PSFHKRT30-[60-1000/0.1]-MD[6,8,10,12,16,20]-KA[0-1000/0.1]-A[8-150/0.1]
PSFHKRT35-[70-1000/0.1]-M[6,8,10,12,16,20,24]-KA[0-1000/0.1]-A[10-150/0.1]
PSFHKRT35-[70-1000/0.1]-MD[6,8,10,12,16,20,24]-KA[0-1000/0.1]-A[10-150/0.1]
PSFHKRT40-[80-1000/0.1]-M[10,12,16,20,24,30]-KA[0-1000/0.1]-A[12-150/0.1]
PSFHKRT40-[80-1000/0.1]-MD[10,12,16,20,24,30]-KA[0-1000/0.1]-A[12-150/0.1]
PSFHKRT50-[100-1000/0.1]-M[12,16,20,24,30]-KA[0-1000/0.1]-A[14-150/0.1]
PSFHKRT50-[100-1000/0.1]-MD[12,16,20,24,30]-KA[0-1000/0.1]-A[14-150/0.1]
SFHKRT6-[15-400/0.1]-M[2.6,3,4]-KA[0-400/0.1]-A[2-150/0.1]
SFHKRT6-[15-400/0.1]-MD[2.6,3,4]-KA[0-400/0.1]-A[2-150/0.1]
SFHKRT8-[15-500/0.1]-M[2.6,3,4,5,6]-KA[0-500/0.1]-A[3-150/0.1]
SFHKRT8-[15-500/0.1]-MD[2.6,3,4,5,6]-KA[0-500/0.1]-A[3-150/0.1]
SFHKRT10-[15-600/0.1]-M[3,4,5,6]-KA[0-600/0.1]-A[3-150/0.1]
SFHKRT10-[15-600/0.1]-MD[3,4,5,6]-KA[0-600/0.1]-A[3-150/0.1]
SFHKRT12-[15-700/0.1]-M[4,5,6,8]-KA[0-700/0.1]-A[4-150/0.1]
SFHKRT12-[15-700/0.1]-MD[4,5,6,8]-KA[0-700/0.1]-A[4-150/0.1]
SFHKRT15-[15-800/0.1]-M[4,5,6,8,10]-KA[0-800/0.1]-A[5-150/0.1]
SFHKRT15-[15-800/0.1]-MD[4,5,6,8,10]-KA[0-800/0.1]-A[5-150/0.1]
SFHKRT17-[30-900/0.1]-M[4,5,6,8,10,12]-KA[0-900/0.1]-A[5-150/0.1]
SFHKRT17-[30-900/0.1]-MD[4,5,6,8,10,12]-KA[0-900/0.1]-A[5-150/0.1]
SFHKRT20-[30-1000/0.1]-M[4,5,6,8,10,12,16]-KA[0-1000/0.1]-A[6-150/0.1]
SFHKRT20-[30-1000/0.1]-MD[4,5,6,8,10,12,16]-KA[0-1000/0.1]-A[6-150/0.1]
SFHKRT25-[50-1000/0.1]-M[4,5,6,8,10,12,16]-KA[0-1000/0.1]-A[8-150/0.1]
SFHKRT25-[50-1000/0.1]-MD[4,5,6,8,10,12,16]-KA[0-1000/0.1]-A[8-150/0.1]
SFHKRT30-[60-1000/0.1]-M[6,8,10,12,16,20]-KA[0-1000/0.1]-A[8-150/0.1]
SFHKRT30-[60-1000/0.1]-MD[6,8,10,12,16,20]-KA[0-1000/0.1]-A[8-150/0.1]
SFHKRT35-[70-1000/0.1]-M[6,8,10,12,16,20,24]-KA[0-1000/0.1]-A[10-150/0.1]
SFHKRT35-[70-1000/0.1]-MD[6,8,10,12,16,20,24]-KA[0-1000/0.1]-A[10-150/0.1]
SFHKRT40-[80-1000/0.1]-M[10,12,16,20,24,30]-KA[0-1000/0.1]-A[12-150/0.1]
SFHKRT40-[80-1000/0.1]-MD[10,12,16,20,24,30]-KA[0-1000/0.1]-A[12-150/0.1]
SFHKRT50-[100-1000/0.1]-M[12,16,20,24,30]-KA[0-1000/0.1]-A[14-150/0.1]
SFHKRT50-[100-1000/0.1]-MD[12,16,20,24,30]-KA[0-1000/0.1]-A[14-150/0.1]
SSFHKRT6-[15-400/0.1]-M[2.6,3,4]-KA[0-400/0.1]-A[2-150/0.1]
SSFHKRT6-[15-400/0.1]-MD[2.6,3,4]-KA[0-400/0.1]-A[2-150/0.1]
SSFHKRT8-[15-500/0.1]-M[2.6,3,4,5,6]-KA[0-500/0.1]-A[3-150/0.1]
SSFHKRT8-[15-500/0.1]-MD[2.6,3,4,5,6]-KA[0-500/0.1]-A[3-150/0.1]
SSFHKRT10-[15-600/0.1]-M[3,4,5,6]-KA[0-600/0.1]-A[3-150/0.1]
SSFHKRT10-[15-600/0.1]-MD[3,4,5,6]-KA[0-600/0.1]-A[3-150/0.1]
SSFHKRT12-[15-700/0.1]-M[4,5,6,8]-KA[0-700/0.1]-A[4-150/0.1]
SSFHKRT12-[15-700/0.1]-MD[4,5,6,8]-KA[0-700/0.1]-A[4-150/0.1]
SSFHKRT15-[15-800/0.1]-M[4,5,6,8,10]-KA[0-800/0.1]-A[5-150/0.1]
SSFHKRT15-[15-800/0.1]-MD[4,5,6,8,10]-KA[0-800/0.1]-A[5-150/0.1]
SSFHKRT17-[30-900/0.1]-M[4,5,6,8,10,12]-KA[0-900/0.1]-A[5-150/0.1]
SSFHKRT17-[30-900/0.1]-MD[4,5,6,8,10,12]-KA[0-900/0.1]-A[5-150/0.1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Surface Treatment	D Tolerance	Shaft Dia. D (mm)	Length L (mm)	A (mm)	Keyway (1) [KA] (mm)	M (mm)	MD
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	6	15 ～ 400	2 ～ 150	0 ～ 400	2.6 ～ 4	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	6	15 ～ 400	2 ～ 150	0 ～ 400	-	2.6 ～ 4
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	8	15 ～ 500	3 ～ 150	0 ～ 500	2.6 ～ 6	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	8	15 ～ 500	3 ～ 150	0 ～ 500	-	2.6 ～ 6
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	10	15 ～ 600	3 ～ 150	0 ～ 600	3 ～ 6	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	10	15 ～ 600	3 ～ 150	0 ～ 600	-	3 ～ 6
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	12	15 ～ 700	4 ～ 150	0 ～ 700	4 ～ 8	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	12	15 ～ 700	4 ～ 150	0 ～ 700	-	4 ～ 8
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	15	15 ～ 800	5 ～ 150	0 ～ 800	4 ～ 10	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	15	15 ～ 800	5 ～ 150	0 ～ 800	-	4 ～ 10
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	17	30 ～ 900	5 ～ 150	0 ～ 900	4 ～ 12	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	17	30 ～ 900	5 ～ 150	0 ～ 900	-	4 ～ 12
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	20	30 ～ 1000	6 ～ 150	0 ～ 1000	4 ～ 16	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	20	30 ～ 1000	6 ～ 150	0 ～ 1000	-	4 ～ 16
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	25	50 ～ 1000	8 ～ 150	0 ～ 1000	4 ～ 16	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	25	50 ～ 1000	8 ～ 150	0 ～ 1000	-	4 ～ 16
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	30	60 ～ 1000	8 ～ 150	0 ～ 1000	6 ～ 20	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	30	60 ～ 1000	8 ～ 150	0 ～ 1000	-	6 ～ 20
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	35	70 ～ 1000	10 ～ 150	0 ～ 1000	6 ～ 24	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	35	70 ～ 1000	10 ～ 150	0 ～ 1000	-	6 ～ 24
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	40	80 ～ 1000	12 ～ 150	0 ～ 1000	10 ～ 30	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	40	80 ～ 1000	12 ～ 150	0 ～ 1000	-	10 ～ 30
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	50	100 ～ 1000	14 ～ 150	0 ～ 1000	12 ～ 30	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	h7 (Ground)	50	100 ～ 1000	14 ～ 150	0 ～ 1000	-	12 ～ 30
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	6	15 ～ 400	2 ～ 150	0 ～ 400	2.6 ～ 4	-
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	6	15 ～ 400	2 ～ 150	0 ～ 400	-	2.6 ～ 4
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	8	15 ～ 500	3 ～ 150	0 ～ 500	2.6 ～ 6	-
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	8	15 ～ 500	3 ～ 150	0 ～ 500	-	2.6 ～ 6
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	10	15 ～ 600	3 ～ 150	0 ～ 600	3 ～ 6	-
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	10	15 ～ 600	3 ～ 150	0 ～ 600	-	3 ～ 6
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	12	15 ～ 700	4 ～ 150	0 ～ 700	4 ～ 8	-
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	12	15 ～ 700	4 ～ 150	0 ～ 700	-	4 ～ 8
-	1	4 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	15	15 ～ 800	5 ～ 150	0 ～ 800	4 ～ 10	-
-	1	4 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	15	15 ～ 800	5 ～ 150	0 ～ 800	-	4 ～ 10
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	17	30 ～ 900	5 ～ 150	0 ～ 900	4 ～ 12	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	17	30 ～ 900	5 ～ 150	0 ～ 900	-	4 ～ 12
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	20	30 ～ 1000	6 ～ 150	0 ～ 1000	4 ～ 16	-
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	20	30 ～ 1000	6 ～ 150	0 ～ 1000	-	4 ～ 16
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	25	50 ～ 1000	8 ～ 150	0 ～ 1000	4 ～ 16	-
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	25	50 ～ 1000	8 ～ 150	0 ～ 1000	-	4 ～ 16
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	30	60 ～ 1000	8 ～ 150	0 ～ 1000	6 ～ 16	-
-	1	5 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	30	60 ～ 1000	8 ～ 150	0 ～ 1000	-	6 ～ 16
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	35	70 ～ 1000	10 ～ 150	0 ～ 1000	6 ～ 24	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	35	70 ～ 1000	10 ～ 150	0 ～ 1000	-	6 ～ 24
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	40	80 ～ 1000	12 ～ 150	0 ～ 1000	10 ～ 30	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	40	80 ～ 1000	12 ～ 150	0 ～ 1000	-	10 ～ 30
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	50	100 ～ 1000	14 ～ 150	0 ～ 1000	12 ～ 30	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Black Oxide	h7 (Ground)	50	100 ～ 1000	14 ～ 150	0 ～ 1000	-	12 ～ 30
-	1	4 Days	10	[Stainless Steel] EN 1.4301 Equiv.	NA	h7 (Ground)	6	15 ～ 400	2 ～ 150	0 ～ 400	2.6 ～ 4	-
-	1	4 Days	10	[Stainless Steel] EN 1.4301 Equiv.	NA	h7 (Ground)	6	15 ～ 400	2 ～ 150	0 ～ 400	-	2.6 ～ 4
-	1	4 Days	10	[Stainless Steel] EN 1.4301 Equiv.	NA	h7 (Ground)	8	15 ～ 500	3 ～ 150	0 ～ 500	2.6 ～ 6	-
-	1	4 Days	10	[Stainless Steel] EN 1.4301 Equiv.	NA	h7 (Ground)	8	15 ～ 500	3 ～ 150	0 ～ 500	-	2.6 ～ 6
-	1	4 Days	10	[Stainless Steel] EN 1.4301 Equiv.	NA	h7 (Ground)	10	15 ～ 600	3 ～ 150	0 ～ 600	3 ～ 6	-
-	1	4 Days	10	[Stainless Steel] EN 1.4301 Equiv.	NA	h7 (Ground)	10	15 ～ 600	3 ～ 150	0 ～ 600	-	3 ～ 6
-	1	4 Days	10	[Stainless Steel] EN 1.4301 Equiv.	NA	h7 (Ground)	12	15 ～ 700	4 ～ 150	0 ～ 700	4 ～ 8	-
-	1	4 Days	10	[Stainless Steel] EN 1.4301 Equiv.	NA	h7 (Ground)	12	15 ～ 700	4 ～ 150	0 ～ 700	-	4 ～ 8
-	1	4 Days	10	[Stainless Steel] EN 1.4301 Equiv.	NA	h7 (Ground)	15	15 ～ 800	5 ～ 150	0 ～ 800	4 ～ 10	-
-	1	4 Days	10	[Stainless Steel] EN 1.4301 Equiv.	NA	h7 (Ground)	15	15 ～ 800	5 ～ 150	0 ～ 800	-	4 ～ 10
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	NA	h7 (Ground)	17	30 ～ 900	5 ～ 150	0 ～ 900	4 ～ 12	-
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	NA	h7 (Ground)	17	30 ～ 900	5 ～ 150	0 ～ 900	-	4 ～ 12

Example of Use

Products homepage

Basic information

Basic Shape	Straight	End Shape (Left)	Straight	End Shape (Right)	Straight
Hardness	No Hardened	Keyway	With Keyway

Configure

72Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- Steel
  - EN 1.1191 Equiv.
- Stainless Steel
  - EN 1.4301 Equiv.
Clear
Surface Treatment
- NA
- Surface Treatment Provided
  - Black Oxide
  - Electroless Nickel Plating
Clear
Shaft Dia. D(mm)
6

8

10

12

13

15

16

17

18

20

22

25

30

35

40

50
Clear
Length L(mm)
[15-1000/0.1mm Unit(s)]
Clear
A(mm)
[2-150/0.1mm Unit(s)]
Clear
Keyway (1) [KA](mm)
[0-1000/0.1mm Unit(s)]
Clear
M(mm)
2.6

3

4

5

6

8

10

12

16

20

24

30
Clear
MD
2.6

3

4

5

6

8

10

12

16

20

24

30
Clear
Type
- PSFGKRT
- PSFHKRT
- PSFMKRT
- SFGKRT
- SFHKRT
- SFMKRT
- SSFGKRT
- SSFHKRT
Clear
D Tolerance
- h9 (Cold-drawn)
- h7 (Ground)
- g6 (Ground)
Clear
Filter by CAD data type
- 2D
- 3D
Clear