Înregistrați-vă
Criterii de filtrare
  • Finish Method
    • Thickness T(mm)
        [4-50/0.5mm unități]
      • Length A(mm)

        When entering the width value, make sure that A>B.

          [20-500/0.5mm unități]
        • Width B(mm)

          When entering the width value, make sure that A>B.

            [20-300/0.5mm unități]
          • CAD
          • Est. zile de expediere
            • Toate
            • În 7 zile lucrătoare

          Metal plates / milled, rotary ground, flat ground surface / AxBxT configurable / EN 1.0038 Equiv. / annealed

          Cod piesă:

          S-au găsit. 16 candidați nedefiniți.
          Cantitate:

          Desen de ansamblu și tabel de specificații

          Back to the Category Material Plates, Blocks

          Technical Drawing - Metal Ingots

          EN 1.0038 Equiv. Plates (Annealed)/Configurable:Related Image
          Open the technical drawing in the new window

          Available dimensions and tolerances can be found under the tab More Information.
           

          Basic Properties (e.g., material, hardness, coating, tolerance) - Metal Ingots


          Material: EN 1.0038 Equiv. Annealed Material
          6-Surface Finish
          Part Number0.5mm Increment
          Upper-Lower Finish MethodTypePlate Thickness ToleranceA, B Dimension ToleranceABT
          SelectionSelectionA≥B
          MilledPVFP
          Q
          N
          M
          P
          Q
          N
          M
           20~500 20~300 4~50
          Rotary GrindingPVR 20~500 20~300 4~50
          Surface GrindingPVS 20~500 20~300 4~50
          There are non machinable areas. See the price list for the details.
          Plate Thickness Tolerance
          Upper-Lower Finish MethodPQNM
          Milled+0.1~+0.30~+0.2±0.1-0.2~0
          Rotary Grinding+0.1~+0.30~+0.2±0.1-0.2~0
          Surface Grinding+0.1~+0.20~+0.1±0.05-0.1~0
          A, B Dimension Tolerance
          A, B DimensionPQNM
          250mm or Less+0.1~+0.30~+0.2±0.1-0.2~0
          250.5mm or More+0.1~+0.60~+0.5±0.25-0.5~0

          Further specifications can be found under the tab More Information .
           

          Composition of a Product Code - Metal Ingots

          Part Number-A-B-T
                 
          Type Upper-Lower
          Surface Finish
           Plate Thickness
          Tolerance
           A, B Dimension Tolerance
          PV F Q M-255-220-18
           

          Alterations - Metal Ingots

          EN 1.0038 Equiv. Plates (Annealed)/Configurable:Related Image

          General Information - Metal Ingots

           

          Selection details of flat steels/plates (metal)

          - Material: aluminum, steel, tool steel, pre-hardened steel, stainless steel (stainless steel), copper, titanium

          - Surface treatment: milled, front-polished, flat-polished

          - Heat treatment: annealed, normal annealed, pre-hardened, tempered, half hard, quarter hard

          - Length [A]: 6 to 3000 mm in 0.01 mm increments

          - Width [B]: 6 to 1500 mm in 0.01 mm increments

          - Thickness [T]: 1.5 to 100 mm in 0.01 mm increments

          - Parallelism: up to 0.01/100 mm

          - Evenness: up to 0.01/100 mm

          - Perpendicularity: up to 0.02/100 mm

           

          Description/Basics

          The metal plates from MISUMI are semi-finished products and are often used in the industry for further processing.
          These can be selected in the MISUMI online shop in different versions. The machining of the lateral surfaces, or rolled, milled or ground at the top and the bottom, is available for the metal plate. The metal plates are available in various tolerances. This usually depends on the respective surface machining. This allows you to configure the MISUMI metal plates to suit your needs and use them as a semi-finished product for further processing. A customized metal block or metal plate can help to reduce the number of work steps in your further processing of the metal plate.
          The metal plates can therefore be used well as semi-finished products for further processing, or often serve as a base plate for substructures, as well as column guide frames.

          An overview of the different metal plates can be found in the PDF Metal Plate Overview.

          You can find other shapes and materials of the semi-finished products by following this link.

          MISUMI also offers the service to manufacture metal plates according to your needs with meviy by uploading CAD data.

           

          Aluminum Plate

          The aluminum plate as a blank or raw material from MISUMI is light compared to other materials, but stable and shock resistant. Therefore, the material aluminum is very often used as a Aluminium Extrusions in plant and mechanical engineering.
          Aluminum plates exhibit good corrosion resistance despite the lack of surface treatment. In principle, aluminum forms an oxide layer that prevents further corrosion. Aluminum plates are very good for further processing.

           

          Steel Plate

          Steel plates made of structural steel are inexpensive in terms of their ratio and also economical due to their good workability.
          The steel plate offers high strength and density. Steel has long been a very common material, so there are many types of steel suitable for different technical requirements.
          Alloy tool steel has a higher temperature resistance, resistance, and hardness than usual structural steel. Another major advantage of this steel plate is the possibility of hardening and remuneration of the material.
          One disadvantage of steel plates is the rather poor corrosion resistance. Without a subsequent surface treatment, steel tends to quickly corrode.

           

          Stainless Steel Plate

          The MISUMI stainless steel plates have good to very good corrosion resistance, which makes the material durable. MISUMI offers various stainless steel plates for a wide variety of requirements in plant and mechanical engineering.
          The surface of stainless steel can be visually refined by sanding or polishing. Stainless steel plates have good temperature resistance, but stainless steel can stain at high temperatures (tempering colour). This should be taken into account for welding joints.
          Stainless steels with chrome-nickel content have an antibacterial effect and offer a poor substrate for germs when polished, which also makes the stainless steel plate hygienic.

           

          Copper Plate/Brass Plate

          The copper plate has very good thermal conductivity and electrical conductivity. This represents a special feature for other materials. Copper plates also have good corrosion resistance and are resistant.
          MISUMI offers various copper alloys in its product range. The most commonly used copper is cold-solidified copper due to its good electrical conductivity and thermal conductivity.
          Another variant of the copper plate is MISUMI made of oxygen-free copper, which is also known as pure copper. Oxygen-free copper has good resistance to hydrogen embrittlement and is often used in the electrical industry.
          Chrome copper plates offer good mechanical strength and abrasion resistance at high temperatures.
          The brass plate, on the other hand, offers high strength and ductility. Therefore, brass permits plastic deformation before the material has a fatigue fracture.

           

          Titanium Plate

          Titanium plates from MISUMI can be referred to as pure titanium.
          The titanium plate is light, but it has a high strength and very high corrosion resistance. Titanium plates also have very good biocompatibility. Since the titanium plates are also biologically compatible, this material is frequently represented in medical technology. Due to its low weight and high strength, titanium is also often used in lightweight construction such as aerospace and aviation. The possible application spectrum of titanium is large. However, titanium plates are usually only used if the properties such as strength of aluminum, for example, are no longer sufficient. The reason for this is that titanium is more cost-intensive in comparison, since production causes a high energy consumption. However, the combination of the good properties of titanium is required for many applications and applications.

          Additional properties of the various materials can be found in the PDF of the Metal Plate Properties.

           

          On-demand Manufacturing

          Meviy

          With meviy, MISUMI also offers to manufacture metal plates and sheet metal according to your wishes. Simply upload the CAD data.

           

          Industrial Applications

          3D printer industry
          Automotive industry
          Pharmaceutical industry
          Packaging industry

          Lista codurilor de piese

          Număr de articole

          Finish Method

          Thickness T

          (mm)

          Length A

          (mm)

          Width B

          (mm)

          RoHS?Cantitate minimă per comandă
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Upper-Lower Surface Grinding (4F2G)
          4 ~ 50
          20 ~ 500
          20 ~ 300
          10
          1 bucăți
          Preț unitar (fără TVA)(preț unitar cu TVA incluse)
          Dată de expediere standard
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare

          Informații detaliate

          Informații de bază

          [Features] You can freely select the dimensions, tolerances and machining methods from small to large.

          Desen de ansamblu și specificații

          Back to the Category Material Plates, Blocks

          Technical Drawing - Metal Ingots

          Specification Tables - Metal Ingots

           
          ■Accuracy Standards - Standard Size (Max. Value)
          ItemUpper-Lower Finish Method
          MilledRotary GrindingSurface Grinding
          Thickness Parallelism (per 100mm)0.050.0120.012
          Flatness (per 100mm)T4~7.50.10.050.05
          T8~15.50.070.030.03
          T16~25.50.050.0150.015
          T26~500.050.0120.012
          Perpendicularity of Datum Plane0.015 per 100mm
          Circumference Chamfering6-Surface FinishC0.2~C0.5
           

          Alterations - Metal Ingots

          EN 1.0038 Equiv. Plates (Annealed)/Configurable:Related Image