6 Series / End Plates for HFS6 / 606030
Desen de ansamblu și tabel de specificații
| HFCR6−606030 |
 |
[M]Material: EN 1.4301 Equiv.
Specification Table
| Part Number |
| HFCR6−606030 |
| Part Number | Applicable Screw (Not included) | Applicable Extrusion |
| Type | ||
| HFCR6−606030 | SHFBS8−12 | HFSR6−606030 |
Alterations
■End Plates Mounting for HFSR6-606030
| Alterations | Hole Machining for End Plate Mounting | |||
| Code | LTS | RTS | TSW | |
| Spec. | The illustration below shows the basic extrusion position. LTS: Machined on the Left End RTS: Machined on the Right End TSW: Machined on both ends. | |||
| Applicable Extrusion | Applicable Screw | |||
| HFSR6-606030 | SHFBS8-12 | Example: LTS | ||
Aluminum Extrusion Conformance Table
| Part Number | Applicable Extrusion End Cap | ||
|---|---|---|---|
| Part Number | Color | Description | |
| HFSR6-606030 | HFCR6-606030 | Silver | End Plates |
Technical Information
Making the extrusion and the extrusion end cap flat
The length of the aluminum extrusion is shortened to compensate for the thickness of the extrusion end cap.
[Example: Bracket connection: When connecting with a length of 300 mm on each side]
A: Protrudes by the thickness of the extrusion end cap
Specify the part number as HFS6-3030-300 with a length of 300 mm.
B: The extrusion end cap does not protrude and becomes flat
Specify the part number as HFS6-3030-294, which is shorter by the thickness of the extrusion end cap.
A: Protrudes by the thickness of the extrusion end cap
Specify the part number as HFS6-3030-300 with a length of 300 mm.
B: The extrusion end cap does not protrude and becomes flat
Specify the part number as HFS6-3030-294, which is shorter by the thickness of the extrusion end cap.
A: Protrudes of
the extrusion end cap
B: The extrusion end cap
does not protrude and
becomes flat
[Example: Screw Joint Connection: When connecting with a length of 300 mm per square]
C: Protrudes by the thickness of the extrusion end cap
Specify the part number HFS6-3030-300-RCV-LCV, a length of 300 mm, and the wrench holes on the left and right.
D: The extrusion end cap does not protrude and becomes flat
Specify the part number HFS6-3030-294-RCV-LCV-FR-FL , the extrusion to be shorter by the thickness of the extrusion end cap, and the wrench hole and wrench hole movement to the left and right.
C: Protrudes by the thickness of the extrusion end cap
Specify the part number HFS6-3030-300-RCV-LCV, a length of 300 mm, and the wrench holes on the left and right.
D: The extrusion end cap does not protrude and becomes flat
Specify the part number HFS6-3030-294-RCV-LCV-FR-FL , the extrusion to be shorter by the thickness of the extrusion end cap, and the wrench hole and wrench hole movement to the left and right.
C: Protrudes of
the extrusion end cap
D: The extrusion end cap
does not protrude and
becomes flat
