Magnets / Urethane Baked
- Promotional pricing ends 30/11/2024
- Volume Discount
- Order quantities extended (D-JIT)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
- Technical Information
| Type | Urethane | Magnet | Heat Resistant Temperature | ||
| Material | Hardness | Material | Surface Treatment | ||
| HXUR | Ether-based Polyurethane | Shore A90 | Neodymium Magnet | Electroless Nickel Plating | 80°C |
Specifications
| Part Number | - | L |
| HXUR5 | - | 5 |
| Part Number | L | d | Attraction Force N{kgf} | Surface Magnetic Flux Density Gauss [G] | Unit Price | |
| Type | D | |||||
| HXUR | 5 | 5 | 3 | 2.35 {0.24} | 3500~3700 | |
| 6 | 5 | 4 | 4.70 {0.48} | 4000~4200 | ||
| 8 | 5 | 5 | 7.64 {0.78} | 4300~4500 | ||
| 8 | 6 | 6 | 11.76 {1.20} | 4400~4600 | ||
| 10 | 8 | 8 | 23.03 {2.35} | 4600~4800 | ||
| 12 | 10 | 10 | 38.02 {3.88} | 4900~5100 | ||
N pole is colored red.
The top and bottom surfaces are not coated with urethane.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| HXUR5-5 |
| HXUR6-5 |
| HXUR8-5 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Attraction Froce (Range) (N) | Attraction Force (Specific) (N) | Outer Diameter D (mm) | Length L (mm) | |
|---|---|---|---|---|---|---|---|---|---|
4.41 € | 1 | Available | 6 Days | 10 | Up to 10.0 | 2.35 | 5 | 5 | |
4.67 € | 1 | Available | 6 Days | 10 | Up to 10.0 | 4.7 | 6 | 5 | |
4.91 € 3.44 € | 1 | Available |
Same day
Stock | 10 | Up to 10.0 | 7.64 | 8 | 5 |
Loading...
More Information
•Can be installed without the need for adhesive or screw.
■ About Installation
• Drill a through hole or deep hole as a mounting hole.
• For recommended hole tolerance, see the table below.
• When mounting, press the magnet into the component slowly. Do not hit the magnet part.
• Push Urethane section, as well as Magnet section inward.
Adopts keyless clamping mechanism which utilizes urethane surface pressure around the magnet for fixing into mounting hole.
Due to this, the actual O.D. is slightly larger than recommended hole size.
| Material | Recommended Mounting Hole Tolerance | Mating Force N {kgf} | Unmating Force N {kgf} | Vibration Test Result (JIS C 60068-2-6) (under No Load) |
| Iron (EN 1.0038 Equiv.) | +0.1 0 | 300 {30.6} | 180 {18.3} | ○ |
| Aluminum (EN AW-5052 Equiv.) | +0.1 0 | 400 {40.8} | 170 {17.3} | ○ |
| Resin (MC Nylon) | +0.1 0 | 300 {30.6} | 150 {15.3} | ○ |
| Mating and Unmating Force are reference values. | ||||
Example of Use
Basic information
| Shape | Round | Magnet Type (Material) | Neodymium Magnet (Standard) | Magnet Surface Treatment | Electroless Nickel Plating |
|---|---|---|---|---|---|
| Magnetization Direction | Thickness |
Configure
Stock
-
- Show only stock items
Basic Attributes
-
Attraction Force (Specific)(N)
-
Outer Diameter D(mm)
-
Length L(mm)
-
Type
- HXUR
-
Attraction Froce (Range)(N)
- Up to 10.0
- 10.1 to 20.0
- 20.1 to 30.0
- 30.1 to 40.0
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
- 6 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
MISUMI Unit еxample related to this product
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.