Rotary axes / offset on one side, internal thread / machining selectable

Click on this image to zoom in.

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Rotary Shafts/One End Stepped and Tapped:Related Image

Type			Tolerance		Material	Surface Treatment
	Standard	Wrench Flats	D	P
	SFRMHG	SFRMHGS	h9 (Cold-drawn)	h7	EN 1.1191 Equiv.	Black Oxide
	PSFRMHG	PSFRMHGS				Electroless Nickel Plating
	SSFRMHG	SSFRMHGS			EN 1.4301 Equiv.	-
	SFRMGG	SFRMGGS		g6	EN 1.1191 Equiv.	Black Oxide
	PSFRMGG	PSFRMGGS				Electroless Nickel Plating
	SSFRMGG	SSFRMGGS			EN 1.4301 Equiv.	-
	SFRHG	SFRHGS	h7 (Ground)	h7	EN 1.1191 Equiv.	Black Oxide
	PSFRHG	PSFRHGS				Electroless Nickel Plating
	SSFRHG	SSFRHGS				-
	SFRG	SFRGS	g6 (Ground)	g6	EN 1.1191 Equiv.	Black Oxide
	PSFRG	PSFRGS				Electroless Nickel Plating
	SSFRG	SSFRGS			EN 1.4301 Equiv.	-

Specifications

	Part Number	-	L	-	F	-	P	-	M	-	SC
D part h9 / P part h7 h7 (Ground) with Wrench Flat	SFRMHG30 SFRHGS25	- -	250 200	- -	F30 F40	- -	P16 P20	- -	M10 M10	-	SC30

D tolerance h9 (Cold-drawn) / P tolerance h7 D tolerance h9 (Cold-drawn) / P tolerance g6

Part Number			0.1mm Increment		1mm Increment	M (Coarse) Selection										1mm Increment	W	ℓ₂	(Y)max.
Type		D	L	F	P											SC Wrench Flats Type only
Standard	Wrench Flats	D	L	F	P											SC Wrench Flats Type only
D part h9 / P part h7 SFRMHG PSFRMHG SSFRMHG (D6 is not available for SSFRMHG.) D part h9 / P part g6 SFRMGG PSFRMGG SSFRMGG (D6 is not available for SSFRMGG.)	D part h9 / P part h7 SFRMHGS PSFRMHGS SSFRMHGS (D6 is not available for SSFRMHG.) D part h9 / P part g6 SFRMGGS PSFRMGGS SSFRMGGS (D6 is not available for SSFRMGGS.)	6	20.0~298.0	2≤F≤Px5	5	3										SC+ℓ₂≤L SC=0 or SC≥1 For SC≤Mx3-F W-M≥2	5	8	300
		8	20.0~398.0		For M3 ~ M8 M+2≤P For M10 ~ 16 M+3≤P For M20 or M24 M+4≤P	3	4	5									7		400
		10	20.0~498.0				4	5	6								8		500
		12	25.0~598.0					5	6	8							10	10	600
		15	25.0~698.0					5	6	8	10						13		700
		20	30.0~798.0					5	6	8	10	12					17		800
		25	30.0~798.0					5	6	8	10	12	16				22
		30	30.0~798.0							8	10	12	16	20			27	15
		35	40.0~798.0							8	10	12	16	20	24		30	15

h7 (Ground)

Part Number			0.1mm Increment		1mm Increment	M (Coarse) Selection											1mm Increment	W	ℓ₂	(Y)max.
Type		D	L	F	P												SC Wrench Flats Type only
Standard	Wrench Flats	D	L	F	P												SC Wrench Flats Type only
SFRHG PSFRHG SSFRHG	SFRHGS PSFRHGS SSFRHGS	6	20.0~298.0	2≤F≤Px5	5	3											SC+ℓ₂≤L SC=0 or SC≥1 For SC≤Mx3-F W-M≥2	5	8	300
		8	20.0~398.0		For M3 ~ M8 M+2≤P For M10 ~ 16 M+3≤P For M20 or M24 M+4≤P For M30 M+5≤P	3	4	5										7		400
		10	20.0~498.0				4	5	6									8		500
		12	25.0~598.0					5	6	8								10	10	600
		15	25.0~698.0					5	6	8	10							13		700
		17	30.0~798.0					5	6	8	10	12						14		800
		20	30.0~798.0					5	6	8	10	12						17
		25	30.0~798.0					5	6	8	10	12	16					22
		30	30.0~798.0							8	10	12	16	20				27	15
		35	40.0~798.0							8	10	12	16	20	24			30	15
		40	40.0~798.0									12	16	20	24	30		36	20
		50	40.0~798.0										16	20	24	30		41	20

g6 (Ground)

Part Number			0.1mm Increment		1mm Increment	M (Coarse) Selection											1mm Increment	W	ℓ₂	(Y)max.
Type		D	L	F	P												SC Wrench Flats Type only
Standard	Wrench Flats	D	L	F	P												SC Wrench Flats Type only
SFRG PSFRG SSFRG (D13, 16, 18 and 22 are not available for SSFRG.)	SFRGS PSFRGS SSFRGS (D13, 16, 18 and 22 are not available for SSFRGS.)	6	20.0~298.0	2≤F≤Px5	5	3											SC+ℓ₂≤L SC=0 or SC≥1 For SC≤Mx3-F W-M≥2	5	8	300
		8	20.0~398.0		For M3 ~ M8 M+2≤P For M10 ~ 16 M+3≤P For M20 or M24 M+4≤P For M30 M+5≤P	3	4	5										7		400
		10	20.0~498.0				4	5	6									8		500
		12	25.0~598.0					5	6	8								10	10	600
		13	25.0~598.0					5	6	8								11		600
		15	25.0~698.0					5	6	8	10							13		700
		16	30.0~798.0					5	6	8	10							14		800
		17	30.0~798.0					5	6	8	10	12						14
		18	30.0~798.0					5	6	8	10	12						15
		20	30.0~798.0					5	6	8	10	12						17
		22	30.0~798.0					5	6	8	10	12	16					19
		25	30.0~798.0					5	6	8	10	12	16					22
		30	30.0~798.0							8	10	12	16	20				27	15
		35	40.0~798.0							8	10	12	16	20	24			30	15
		40	40.0~798.0									12	16	20	24	30		36	20
		50	40.0~798.0										16	20	24	30		41	20

When D-P≤2, chamfer C at the step is 0.2 or less.

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
PSFRG6-[15-398/0.1]-F[2-25/0.1]-P5-M[2.6,3,4]
PSFRG6-[15-398/0.1]-F[2-25/0.1]-P5-MD[3,4]
PSFRG8-[15-498/0.1]-F[2-35/0.1]-P[5-7/1]-M[2.6,3,4,5,6]
PSFRG8-[15-498/0.1]-F[2-35/0.1]-P[5-7/1]-MD[3,4,5,6]
PSFRG10-[15-598/0.1]-F[2-50/0.1]-P[6-9/1]-M[3,4,5,6]
PSFRG10-[15-598/0.1]-F[2-50/0.1]-P[6-9/1]-MD[3,4,5,6]
PSFRG12-[15-698/0.1]-F[2-55/0.1]-P[7-11/1]-M[4,5,6,8]
PSFRG12-[15-698/0.1]-F[2-55/0.1]-P[7-11/1]-MD[4,5,6,8]
PSFRG13-[15-898/0.1]-F[2-55/0.1]-P[5-12/1]-M[3,4,5,6,8]
PSFRG13-[15-898/0.1]-F[2-55/0.1]-P[5-12/1]-MD[3,4,5,6,8]
PSFRG15-[15-798/0.1]-F[2-70/0.1]-P[7-14/1]-M[4,5,6,8,10]
PSFRG15-[15-798/0.1]-F[2-70/0.1]-P[7-14/1]-MD[4,5,6,8,10]
PSFRG16-[15-998/0.1]-F[2-70/0.1]-P[6-15/1]-M[4,5,6,8,10,12]
PSFRG16-[15-998/0.1]-F[2-70/0.1]-P[6-15/1]-MD[4,5,6,8,10,12]
PSFRG17-[30-898/0.1]-F[2-80/0.1]-P[7-16/1]-M[4,5,6,8,10,12]
PSFRG17-[30-898/0.1]-F[2-80/0.1]-P[7-16/1]-MD[4,5,6,8,10,12]
PSFRG18-[24-998/0.1]-F[2-80/0.1]-P[6-17/1]-M[4,5,6,8,10,12]
PSFRG18-[24-998/0.1]-F[2-80/0.1]-P[6-17/1]-MD[4,5,6,8,10,12]
PSFRG20-[30-998/0.1]-F[2-95/0.1]-P[7-19/1]-M[4,5,6,8,10,12,16]
PSFRG20-[30-998/0.1]-F[2-95/0.1]-P[7-19/1]-MD[4,5,6,8,10,12,16]
PSFRG22-[24-998/0.1]-F[2-95/0.1]-P[6-21/1]-M[4,5,6,8,10,12,16]
PSFRG22-[24-998/0.1]-F[2-95/0.1]-P[6-21/1]-MD[4,5,6,8,10,12,16]
PSFRG25-[30-998/0.1]-F[2-120/0.1]-P[7-24/1]-M[4,5,6,8,10,12,16]
PSFRG25-[30-998/0.1]-F[2-120/0.1]-P[7-24/1]-MD[4,5,6,8,10,12,16]
PSFRG30-[30-998/0.1]-F[2-145/0.1]-P[10-29/1]-M[6,8,10,12,16,20]
PSFRG30-[30-998/0.1]-F[2-145/0.1]-P[10-29/1]-MD[6,8,10,12,16,20]
PSFRG35-[40-998/0.1]-F[2-170/0.1]-P[10-34/1]-M[6,8,10,12,16,20,24]
PSFRG35-[40-998/0.1]-F[2-170/0.1]-P[10-34/1]-MD[6,8,10,12,16,20]
PSFRG40-[40-998/0.1]-F[2-195/0.1]-P[15-39/1]-M[10,12,16,20,24,30]
PSFRG40-[40-998/0.1]-F[2-195/0.1]-P[15-39/1]-MD[10,12,16,20]
PSFRG50-[40-998/0.1]-F[2-245/0.1]-P[19-49/1]-M[12,16,20,24,30]
PSFRG50-[40-998/0.1]-F[2-245/0.1]-P[19-49/1]-MD[12,16,20]
PSFRGS6-[15-398/0.1]-F[2-25/0.1]-P5-M[2.6,3,4]-SC[0-390/1]
PSFRGS6-[15-398/0.1]-F[2-25/0.1]-P5-MD[3,4]-SC[0-390/1]
PSFRGS8-[15-498/0.1]-F[2-35/0.1]-P[5-7/1]-M[2.6,3,4,5,6]-SC[0-490/1]
PSFRGS8-[15-498/0.1]-F[2-35/0.1]-P[5-7/1]-MD[3,4,5,6]-SC[0-490/1]
PSFRGS10-[15-598/0.1]-F[2-50/0.1]-P[6-9/1]-M[3,4,5,6]-SC[0-590/1]
PSFRGS10-[15-598/0.1]-F[2-50/0.1]-P[6-9/1]-MD[3,4,5,6]-SC[0-590/1]
PSFRGS12-[15-698/0.1]-F[2-55/0.1]-P[7-11/1]-M[4,5,6,8]-SC[0-688/1]
PSFRGS12-[15-698/0.1]-F[2-55/0.1]-P[7-11/1]-MD[4,5,6,8]-SC[0-688/1]
PSFRGS13-[15-898/0.1]-F[2-55/0.1]-P[5-12/1]-M[3,4,5,6,8]-SC[0-888/1]
PSFRGS13-[15-898/0.1]-F[2-55/0.1]-P[5-12/1]-MD[3,4,5,6,8]-SC[0-888/1]
PSFRGS15-[15-798/0.1]-F[2-70/0.1]-P[7-14/1]-M[4,5,6,8,10]-SC[0-788/1]
PSFRGS15-[15-798/0.1]-F[2-70/0.1]-P[7-14/1]-MD[4,5,6,8,10]-SC[0-788/1]
PSFRGS16-[15-998/0.1]-F[2-70/0.1]-P[6-15/1]-M[4,5,6,8,10,12]-SC[0-988/1]
PSFRGS16-[15-998/0.1]-F[2-70/0.1]-P[6-15/1]-MD[4,5,6,8,10,12]-SC[0-988/1]
PSFRGS17-[30-898/0.1]-F[2-80/0.1]-P[7-16/1]-M[4,5,6,8,10,12]-SC[0-888/1]
PSFRGS17-[30-898/0.1]-F[2-80/0.1]-P[7-16/1]-MD[4,5,6,8,10,12]-SC[0-888/1]
PSFRGS18-[24-998/0.1]-F[2-80/0.1]-P[6-17/1]-M[4,5,6,8,10,12]-SC[0-988/1]
PSFRGS18-[24-998/0.1]-F[2-80/0.1]-P[6-17/1]-MD[4,5,6,8,10,12]-SC[0-988/1]
PSFRGS20-[30-998/0.1]-F[2-95/0.1]-P[7-19/1]-M[4,5,6,8,10,12,16]-SC[0-988/1]
PSFRGS20-[30-998/0.1]-F[2-95/0.1]-P[7-19/1]-MD[4,5,6,8,10,12,16]-SC[0-988/1]
PSFRGS22-[24-998/0.1]-F[2-95/0.1]-P[6-21/1]-M[4,5,6,8,10,12,16]-SC[0-988/1]
PSFRGS22-[24-998/0.1]-F[2-95/0.1]-P[6-21/1]-MD[4,5,6,8,10,12,16]-SC[0-988/1]
PSFRGS25-[30-998/0.1]-F[2-120/0.1]-P[7-24/1]-M[4,5,6,8,10,12,16]-SC[0-988/1]
PSFRGS25-[30-998/0.1]-F[2-120/0.1]-P[7-24/1]-MD[4,5,6,8,10,12,16]-SC[0-988/1]
PSFRGS30-[30-998/0.1]-F[2-145/0.1]-P[10-29/1]-M[6,8,10,12,16,20]-SC[0-983/1]
PSFRGS30-[30-998/0.1]-F[2-145/0.1]-P[10-29/1]-MD[6,8,10,12,16,20]-SC[0-983/1]
PSFRGS35-[40-998/0.1]-F[2-170/0.1]-P[10-34/1]-M[6,8,10,12,16,20,24]-SC[0-983/1]
PSFRGS35-[40-998/0.1]-F[2-170/0.1]-P[10-34/1]-MD[6,8,10,12,16,20]-SC[0-983/1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Surface Treatment	D Tolerance	Shaft Dia. D (mm)	Length L (mm)	F (mm)	M (mm)	MD	P (mm)	Wrench Flats Machining [SC] (mm)
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	6	15 ～ 398	2 ～ 25	2.6 ～ 4	-	5	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	6	15 ～ 398	2 ～ 25	-	3 ～ 4	5	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	8	15 ～ 498	2 ～ 35	2.6 ～ 6	-	5 ～ 7	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	8	15 ～ 498	2 ～ 35	-	3 ～ 6	5 ～ 7	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	10	15 ～ 598	2 ～ 50	3 ～ 6	-	6 ～ 9	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	10	15 ～ 598	2 ～ 50	-	3 ～ 6	6 ～ 9	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	12	15 ～ 698	2 ～ 55	4 ～ 8	-	7 ～ 11	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	12	15 ～ 698	2 ～ 55	-	4 ～ 8	7 ～ 11	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	13	15 ～ 898	2 ～ 55	3 ～ 8	-	5 ～ 12	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	13	15 ～ 898	2 ～ 55	-	3 ～ 8	5 ～ 12	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	15	15 ～ 798	2 ～ 70	4 ～ 10	-	7 ～ 14	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	15	15 ～ 798	2 ～ 70	-	4 ～ 10	7 ～ 14	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	16	15 ～ 998	2 ～ 70	4 ～ 12	-	6 ～ 15	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	16	15 ～ 998	2 ～ 70	-	4 ～ 12	6 ～ 15	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	17	30 ～ 898	2 ～ 80	4 ～ 12	-	7 ～ 16	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	17	30 ～ 898	2 ～ 80	-	4 ～ 12	7 ～ 16	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	18	24 ～ 998	2 ～ 80	4 ～ 12	-	6 ～ 17	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	18	24 ～ 998	2 ～ 80	-	4 ～ 12	6 ～ 17	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	20	30 ～ 998	2 ～ 95	4 ～ 16	-	7 ～ 19	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	20	30 ～ 998	2 ～ 95	-	4 ～ 16	7 ～ 19	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	22	24 ～ 998	2 ～ 95	4 ～ 16	-	6 ～ 21	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	22	24 ～ 998	2 ～ 95	-	4 ～ 16	6 ～ 21	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	25	30 ～ 998	2 ～ 120	4 ～ 16	-	7 ～ 24	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	25	30 ～ 998	2 ～ 120	-	4 ～ 16	7 ～ 24	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	30	30 ～ 998	2 ～ 145	6 ～ 20	-	10 ～ 29	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	30	30 ～ 998	2 ～ 145	-	6 ～ 20	10 ～ 29	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	35	40 ～ 998	2 ～ 170	6 ～ 24	-	10 ～ 34	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	35	40 ～ 998	2 ～ 170	-	6 ～ 20	10 ～ 34	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	40	40 ～ 998	2 ～ 195	10 ～ 30	-	15 ～ 39	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	40	40 ～ 998	2 ～ 195	-	10 ～ 20	15 ～ 39	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	50	40 ～ 998	2 ～ 245	12 ～ 30	-	19 ～ 49	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	50	40 ～ 998	2 ～ 245	-	12 ～ 20	19 ～ 49	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	6	15 ～ 398	2 ～ 25	2.6 ～ 4	-	5	0 ～ 390
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	6	15 ～ 398	2 ～ 25	-	3 ～ 4	5	0 ～ 390
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	8	15 ～ 498	2 ～ 35	2.6 ～ 6	-	5 ～ 7	0 ～ 490
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	8	15 ～ 498	2 ～ 35	-	3 ～ 6	5 ～ 7	0 ～ 490
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	10	15 ～ 598	2 ～ 50	3 ～ 6	-	6 ～ 9	0 ～ 590
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	10	15 ～ 598	2 ～ 50	-	3 ～ 6	6 ～ 9	0 ～ 590
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	12	15 ～ 698	2 ～ 55	4 ～ 8	-	7 ～ 11	0 ～ 688
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	12	15 ～ 698	2 ～ 55	-	4 ～ 8	7 ～ 11	0 ～ 688
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	13	15 ～ 898	2 ～ 55	3 ～ 8	-	5 ～ 12	0 ～ 888
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	13	15 ～ 898	2 ～ 55	-	3 ～ 8	5 ～ 12	0 ～ 888
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	15	15 ～ 798	2 ～ 70	4 ～ 10	-	7 ～ 14	0 ～ 788
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	15	15 ～ 798	2 ～ 70	-	4 ～ 10	7 ～ 14	0 ～ 788
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	16	15 ～ 998	2 ～ 70	4 ～ 12	-	6 ～ 15	0 ～ 988
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	16	15 ～ 998	2 ～ 70	-	4 ～ 12	6 ～ 15	0 ～ 988
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	17	30 ～ 898	2 ～ 80	4 ～ 12	-	7 ～ 16	0 ～ 888
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	17	30 ～ 898	2 ～ 80	-	4 ～ 12	7 ～ 16	0 ～ 888
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	18	24 ～ 998	2 ～ 80	4 ～ 12	-	6 ～ 17	0 ～ 988
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	18	24 ～ 998	2 ～ 80	-	4 ～ 12	6 ～ 17	0 ～ 988
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	20	30 ～ 998	2 ～ 95	4 ～ 16	-	7 ～ 19	0 ～ 988
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	20	30 ～ 998	2 ～ 95	-	4 ～ 16	7 ～ 19	0 ～ 988
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	22	24 ～ 998	2 ～ 95	4 ～ 16	-	6 ～ 21	0 ～ 988
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	22	24 ～ 998	2 ～ 95	-	4 ～ 16	6 ～ 21	0 ～ 988
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	25	30 ～ 998	2 ～ 120	4 ～ 16	-	7 ～ 24	0 ～ 988
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	25	30 ～ 998	2 ～ 120	-	4 ～ 16	7 ～ 24	0 ～ 988
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	30	30 ～ 998	2 ～ 145	6 ～ 20	-	10 ～ 29	0 ～ 983
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	30	30 ～ 998	2 ～ 145	-	6 ～ 20	10 ～ 29	0 ～ 983
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	35	40 ～ 998	2 ～ 170	6 ～ 24	-	10 ～ 34	0 ～ 983
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	35	40 ～ 998	2 ～ 170	-	6 ～ 20	10 ～ 34	0 ～ 983

1
2
3
4
5
Next >>

Example of Use

Products homepage

Basic information

Basic Shape	One End Stepped	End Shape (Left)	Tapped	End Shape (Right)	Straight
Hardness	No Hardened	Keyway	Keyway Option (Alteration)

Configure

506Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- Steel
  - EN 1.1191 Equiv.
- Stainless Steel
  - EN 1.4301 Equiv.
Clear
Surface Treatment
- NA
- Surface Treatment Provided
  - Black Oxide
  - Electroless Nickel Plating
Clear
D Tolerance
- h9 (Cold-drawn)
- h7 (Ground)
- g6 (Ground)
Clear
Shaft Dia. D(mm)
6

8

10

12

13

15

16

17

18

20

22

25

30

35

40

50
Clear
Length L(mm)
[15-998/0.1mm Unit(s)]
Clear
F(mm)
[2-245/0.1mm Unit(s)]
Clear
M(mm)
2.6

3

4

5

6

8

10

12

16

20

24

30
Clear
MD
3

4

5

6

8

10

12

16

20
Clear
P(mm)
5
[3-49/1mm Unit(s)]
Clear
Wrench Flats Machining [SC](mm)
[0-988/1mm Unit(s)]
Clear
Type
- PSFRG
- PSFRGS
- PSFRHG
- PSFRHGS
- PSFRMGG
- PSFRMGGS
- PSFRMHG
- PSFRMHGS
- SFRG
- SFRGS
- SFRHG
- SFRHGS
- SFRMGGS
- SFRMHG
- SFRMHGS
- SSFRG
- SSFRGS
- SSFRHG
- SSFRHGS
- SSFRMGG
- SSFRMGGS
- SSFRMHG
- SSFRMHGS
Clear
Filter by CAD data type
- 2D
- 3D
Clear