Slot Pins for Inspection Components / Threaded / Tapered

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Shipping Days
More Information
Catalog

Material1	Hardness	Taper Shape Fixed		Angle Selection	X dimension Configurable	Tapered, No Step
		Type		Type	Type	Type
		S 0 -0.02	S_g6	S 0 -0.02	S 0 -0.02	Type
EN 1.1191 Equiv.	-	KJPMT	KJPGMT	KJPMK	KJPMX	KJPMTN
EN 1.1191 Equiv.	45HRC~	KJPMTH	KJPGMTH	KJPMKH	KJPMXH	KJPMTNH
EN 1.4301 Equiv.	-	KJPMTS	KJPGMTS	KJPMKS	KJPMXS	-
² EN 1.4037 Equiv.	45~50HRC	KJPMTC	KJPGMTC	KJPMKC	KJPMXC	-

Specifications

Part Number (TYPE, D)

KJPKDT16

P10.00

B15

C10

Part Number (TYPE, D)

Taper Shape Fixed
Angle K Selectable
X Dimension Selectable
Tapered, No Step

KJPMT12L
KJPMKH16
KJPMXH20
KJPMTN8

-
-
-
-

P14.20
P11.50
P12.50
P5.60

-
-
-

S10
S8
S11

-
-
-
-

M5
M6
M8
M4

-
-
-
-

L15
L10
L13
L10

-
-
-
-

B10
B10
B18
B10

K10

S	g6
4~6	-0.004 -0.012
7~10	-0.005 -0.014
11~18	-0.006 -0.017
19~29	-0.007 -0.020

■Taper Shape Fixed Type

Part Number			P 0.01mm Increment	S (P-1≥S) 1mm Increment	M (S≥M) Selection								1mm Increment		X	Y₁, Y₂	K°
S 0 -0.02	S_g6	D	P 0.01mm Increment	S (P-1≥S) 1mm Increment	M (S≥M) Selection								L	B	X	Y₁, Y₂	K°
(EN 1.1191 Equiv.) KJPMT (EN 1.1191 Equiv. Hardened) KJPMTH (EN 1.4301 Equiv.) KJPMTS (EN 1.4037 Equiv.) KJPMTC	(EN 1.1191 Equiv.) KJPGMT (EN 1.1191 Equiv. Hardened) KJPGMTH (EN 1.4301 Equiv.) KJPGMTS (EN 1.4037 Equiv.) KJPGMTC	8	5.00~6.00	4~5	3	4							0~25 (L≤Sx3) When L=0, specify S as 0.	5~25 (M≤B≤Mx3) For M3 (M≤B≤Mx2)	5	1	Tapered 1/5
		10	5.00~8.00	4~7		4	5	6
		12	5.00~10.00	4~9		4	5	6	8
		16	8.00~14.00	7~13		4	5	6	8	10	S10	12
		20	10.00~18.00	9~17			5	6	8	10	S10	12
		25	15.00~23.00	14~19			5	6	8	10	S10	12
		10L	10.00~16.00	5~15		4	5	6	8	10	S10
		12L	12.00~20.00	6~19			5	6	8	10	S10	12
		16L	16.00~25.00	8~24				6	8	10	S10	12
		20L	20.00~30.00	10~29				6	8	10	S10	12

S10 is fine thread (pitch 1.25).

■Angle K Selectable (X dim. fixed) X Dimension Selectable Type (Angel K° is fixed)

Part Number

P
0.01mm Increment

S
1mm Increment

M (S≥M) Selection

1mm Increment

K°

Y₁

Y₂

Condition

Type

Selection

Fixed

Selection

Fixed

S 0
-0.02

Angle Selection

X Dimension Selectable

(EN 1.1191 Equiv.)
KJPMK

(EN 1.1191 Equiv. Hardened)
KJPMKH

(EN 1.4301 Equiv.)
KJPMKS

(EN 1.4037 Equiv.)
KJPMKC

(EN 1.1191 Equiv.)
KJPMX

(EN 1.1191 Equiv. Hardened)
KJPMXH

(EN 1.4301 Equiv.)
KJPMXS

(EN 1.4037 Equiv.)
KJPMXC

5.21~7.59

4~5

4, 5, 6
8, 10, 12
(P≥M)

0~25
(L≤Sx3)

When L=0,
specify S as 0.

5~25
(M≤B≤Mx3)

10
15

1
2
3

Angle Selectable
When K°=10, 1.8
When K°=15, 2.7

Angle Selectable
When K°=10, S D>P+2.8
When K°=15, S D>P+3.7
X Dim. Selectable
When X=1, S D>P+2.8
When X=2, S D>P+2.6
When X=3, S D>P+2.4

5.21~9.59

4~7

8.00~13.59

4~11

1/5

X Dim. Selectable

10.00~17.59

6~15

When X=1, 1.8
When X=2, 1.6
When X=3, 1.4

When X=1, 0.2
When X=2, 0.4
When X=3, 0.6

15.00~22.59

8~19

■Tapered, No Step

Part Number		P 0.01mm Increment	M (P-1≥M) Selection								1mm Increment
Type	D
Tapered, No Step	D										L	B
(EN 1.1191 Equiv.) KJPMTN (EN 1.1191 Equiv. Hardened) KJPMTNH	8	5.00~6.00	3	4							3~25 (L≤(P-1)x3)	5~25 (M≤B≤Mx3) For M3 (M≤B≤Mx2)
	10	5.00~8.00		4	5	6
	12	5.00~10.00		4	5	6	8
	16	8.00~14.00		4	5	6	8	10	S10	12
	20	10.00~18.00			5	6	8	10	S10	12
	25	15.00~23.00			5	6	8	10	S10	12

S10 is fine thread (pitch 1.25).

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
KJPGMT8-P[5-6/0.01]-S0-M[3,4]-L0-B[5-25/1]
KJPGMT8-P[5-6/0.01]-S0-M[3,4]-L[0-25/1]-B[5-25/1]
KJPGMT8-P[5-6/0.01]-S[4-5/1]-M[3,4]-L0-B[5-25/1]
KJPGMT8-P[5-6/0.01]-S[4-5/1]-M[3,4]-L[0-25/1]-B[5-25/1]
KJPGMT10-P[5-8/0.01]-S0-M[4,5,6]-L0-B[5-25/1]
KJPGMT10-P[5-8/0.01]-S0-M[4,5,6]-L[0-25/1]-B[5-25/1]
KJPGMT10-P[5-8/0.01]-S[4-7/1]-M[4,5,6]-L0-B[5-25/1]
KJPGMT10-P[5-8/0.01]-S[4-7/1]-M[4,5,6]-L[0-25/1]-B[5-25/1]
KJPGMT10L-P[10-16/0.01]-S0-M[4,5,6,8,10]-L0-B[5-25/1]
KJPGMT10L-P[10-16/0.01]-S0-M[4,5,6,8,10]-L[0-25/1]-B[5-25/1]
KJPGMT10L-P[10-16/0.01]-S0-MS10-L0-B[5-25/1]
KJPGMT10L-P[10-16/0.01]-S0-MS10-L[0-25/1]-B[5-25/1]
KJPGMT10L-P[10-16/0.01]-S[5-15/1]-M[4,5,6,8,10]-L0-B[5-25/1]
KJPGMT10L-P[10-16/0.01]-S[5-15/1]-M[4,5,6,8,10]-L[0-25/1]-B[5-25/1]
KJPGMT10L-P[10-16/0.01]-S[5-15/1]-MS10-L0-B[5-25/1]
KJPGMT10L-P[10-16/0.01]-S[5-15/1]-MS10-L[0-25/1]-B[5-25/1]
KJPGMT12-P[5-10/0.01]-S0-M[4,5,6,8]-L0-B[5-25/1]
KJPGMT12-P[5-10/0.01]-S0-M[4,5,6,8]-L[0-25/1]-B[5-25/1]
KJPGMT12-P[5-10/0.01]-S[4-9/1]-M[4,5,6,8]-L0-B[5-25/1]
KJPGMT12-P[5-10/0.01]-S[4-9/1]-M[4,5,6,8]-L[0-25/1]-B[5-25/1]
KJPGMT12L-P[12-20/0.01]-S0-M[5,6,8,10,12]-L0-B[5-25/1]
KJPGMT12L-P[12-20/0.01]-S0-M[5,6,8,10,12]-L[0-25/1]-B[5-25/1]
KJPGMT12L-P[12-20/0.01]-S0-MS10-L0-B[5-25/1]
KJPGMT12L-P[12-20/0.01]-S0-MS10-L[0-25/1]-B[5-25/1]
KJPGMT12L-P[12-20/0.01]-S[6-19/1]-M[5,6,8,10,12]-L0-B[5-25/1]
KJPGMT12L-P[12-20/0.01]-S[6-19/1]-M[5,6,8,10,12]-L[0-25/1]-B[5-25/1]
KJPGMT12L-P[12-20/0.01]-S[6-19/1]-MS10-L0-B[5-25/1]
KJPGMT12L-P[12-20/0.01]-S[6-19/1]-MS10-L[0-25/1]-B[5-25/1]
KJPGMT16-P[8-14/0.01]-S0-M[4,5,6,8,10,12]-L0-B[5-25/1]
KJPGMT16-P[8-14/0.01]-S0-M[4,5,6,8,10,12]-L[0-25/1]-B[5-25/1]
KJPGMT16-P[8-14/0.01]-S0-MS10-L0-B[5-25/1]
KJPGMT16-P[8-14/0.01]-S0-MS10-L[0-25/1]-B[5-25/1]
KJPGMT16-P[8-14/0.01]-S[7-13/1]-M[4,5,6,8,10,12]-L0-B[5-25/1]
KJPGMT16-P[8-14/0.01]-S[7-13/1]-M[4,5,6,8,10,12]-L[0-25/1]-B[5-25/1]
KJPGMT16-P[8-14/0.01]-S[7-13/1]-MS10-L0-B[5-25/1]
KJPGMT16-P[8-14/0.01]-S[7-13/1]-MS10-L[0-25/1]-B[5-25/1]
KJPGMT16L-P[16-25/0.01]-S0-M[6,8,10,12]-L0-B[5-25/1]
KJPGMT16L-P[16-25/0.01]-S0-M[6,8,10,12]-L[0-25/1]-B[5-25/1]
KJPGMT16L-P[16-25/0.01]-S0-MS10-L0-B[5-25/1]
KJPGMT16L-P[16-25/0.01]-S0-MS10-L[0-25/1]-B[5-25/1]
KJPGMT16L-P[16-25/0.01]-S[8-24/1]-M[6,8,10,12]-L0-B[5-25/1]
KJPGMT16L-P[16-25/0.01]-S[8-24/1]-M[6,8,10,12]-L[0-25/1]-B[5-25/1]
KJPGMT16L-P[16-25/0.01]-S[8-24/1]-MS10-L0-B[5-25/1]
KJPGMT16L-P[16-25/0.01]-S[8-24/1]-MS10-L[0-25/1]-B[5-25/1]
KJPGMT20-P[10-18/0.01]-S0-M[5,6,8,10,12]-L0-B[5-25/1]
KJPGMT20-P[10-18/0.01]-S0-M[5,6,8,10,12]-L[0-25/1]-B[5-25/1]
KJPGMT20-P[10-18/0.01]-S0-MS10-L0-B[5-25/1]
KJPGMT20-P[10-18/0.01]-S0-MS10-L[0-25/1]-B[5-25/1]
KJPGMT20-P[10-18/0.01]-S[9-17/1]-M[5,6,8,10,12]-L0-B[5-25/1]
KJPGMT20-P[10-18/0.01]-S[9-17/1]-M[5,6,8,10,12]-L[0-25/1]-B[5-25/1]
KJPGMT20-P[10-18/0.01]-S[9-17/1]-MS10-L0-B[5-25/1]
KJPGMT20-P[10-18/0.01]-S[9-17/1]-MS10-L[0-25/1]-B[5-25/1]
KJPGMT20L-P[20-30/0.01]-S0-M[6,8,10,12]-L0-B[5-25/1]
KJPGMT20L-P[20-30/0.01]-S0-M[6,8,10,12]-L[0-25/1]-B[5-25/1]
KJPGMT20L-P[20-30/0.01]-S0-MS10-L0-B[5-25/1]
KJPGMT20L-P[20-30/0.01]-S0-MS10-L[0-25/1]-B[5-25/1]
KJPGMT20L-P[20-30/0.01]-S[10-29/1]-M[6,8,10,12]-L0-B[5-25/1]
KJPGMT20L-P[20-30/0.01]-S[10-29/1]-M[6,8,10,12]-L[0-25/1]-B[5-25/1]
KJPGMT20L-P[20-30/0.01]-S[10-29/1]-MS10-L0-B[5-25/1]
KJPGMT20L-P[20-30/0.01]-S[10-29/1]-MS10-L[0-25/1]-B[5-25/1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Hardness	Large Head/Small Head	Insertion Part S Dimension Tolerance	Taper Shape	Outer Dia. D (Ø)	B (mm)	K (°)	L (mm)	M	MS	P (mm)	S (mm)	X (mm)
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	8	5 ～ 25	-	-	3 ～ 4	-	5 ～ 6	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	8	5 ～ 25	-	0 ～ 25	3 ～ 4	-	5 ～ 6	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	8	5 ～ 25	-	-	3 ～ 4	-	5 ～ 6	4 ～ 5	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	8	5 ～ 25	-	0 ～ 25	3 ～ 4	-	5 ～ 6	4 ～ 5	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	10	5 ～ 25	-	-	4 ～ 6	-	5 ～ 8	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	10	5 ～ 25	-	0 ～ 25	4 ～ 6	-	5 ～ 8	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	10	5 ～ 25	-	-	4 ～ 6	-	5 ～ 8	4 ～ 7	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	10	5 ～ 25	-	0 ～ 25	4 ～ 6	-	5 ～ 8	4 ～ 7	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	10	5 ～ 25	-	-	4 ～ 10	-	10 ～ 16	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	10	5 ～ 25	-	0 ～ 25	4 ～ 10	-	10 ～ 16	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	10	5 ～ 25	-	-	-	10	10 ～ 16	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	10	5 ～ 25	-	0 ～ 25	-	10	10 ～ 16	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	10	5 ～ 25	-	-	4 ～ 10	-	10 ～ 16	5 ～ 15	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	10	5 ～ 25	-	0 ～ 25	4 ～ 10	-	10 ～ 16	5 ～ 15	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	10	5 ～ 25	-	-	-	10	10 ～ 16	5 ～ 15	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	10	5 ～ 25	-	0 ～ 25	-	10	10 ～ 16	5 ～ 15	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	12	5 ～ 25	-	-	4 ～ 8	-	5 ～ 10	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	12	5 ～ 25	-	0 ～ 25	4 ～ 8	-	5 ～ 10	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	12	5 ～ 25	-	-	4 ～ 8	-	5 ～ 10	4 ～ 9	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	12	5 ～ 25	-	0 ～ 25	4 ～ 8	-	5 ～ 10	4 ～ 9	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	12	5 ～ 25	-	-	5 ～ 12	-	12 ～ 20	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	12	5 ～ 25	-	0 ～ 25	5 ～ 12	-	12 ～ 20	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	12	5 ～ 25	-	-	-	10	12 ～ 20	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	12	5 ～ 25	-	0 ～ 25	-	10	12 ～ 20	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	12	5 ～ 25	-	-	5 ～ 12	-	12 ～ 20	6 ～ 19	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	12	5 ～ 25	-	0 ～ 25	5 ～ 12	-	12 ～ 20	6 ～ 19	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	12	5 ～ 25	-	-	-	10	12 ～ 20	6 ～ 19	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	12	5 ～ 25	-	0 ～ 25	-	10	12 ～ 20	6 ～ 19	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	-	4 ～ 12	-	8 ～ 14	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	0 ～ 25	4 ～ 12	-	8 ～ 14	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	-	-	10	8 ～ 14	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	0 ～ 25	-	10	8 ～ 14	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	-	4 ～ 12	-	8 ～ 14	7 ～ 13	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	0 ～ 25	4 ～ 12	-	8 ～ 14	7 ～ 13	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	-	-	10	8 ～ 14	7 ～ 13	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	0 ～ 25	-	10	8 ～ 14	7 ～ 13	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	-	6 ～ 12	-	16 ～ 25	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	0 ～ 25	6 ～ 12	-	16 ～ 25	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	-	-	10	16 ～ 25	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	0 ～ 25	-	10	16 ～ 25	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	-	6 ～ 12	-	16 ～ 25	8 ～ 24	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	0 ～ 25	6 ～ 12	-	16 ～ 25	8 ～ 24	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	-	-	10	16 ～ 25	8 ～ 24	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	16	5 ～ 25	-	0 ～ 25	-	10	16 ～ 25	8 ～ 24	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	-	5 ～ 12	-	10 ～ 18	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	0 ～ 25	5 ～ 12	-	10 ～ 18	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	-	-	10	10 ～ 18	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	0 ～ 25	-	10	10 ～ 18	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	-	5 ～ 12	-	10 ～ 18	9 ～ 17	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	0 ～ 25	5 ～ 12	-	10 ～ 18	9 ～ 17	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	-	-	10	10 ～ 18	9 ～ 17	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	0 ～ 25	-	10	10 ～ 18	9 ～ 17	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	-	6 ～ 12	-	20 ～ 30	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	0 ～ 25	6 ～ 12	-	20 ～ 30	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	-	-	10	20 ～ 30	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	0 ～ 25	-	10	20 ～ 30	0	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	-	6 ～ 12	-	20 ～ 30	10 ～ 29	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	0 ～ 25	6 ～ 12	-	20 ～ 30	10 ～ 29	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	-	-	10	20 ～ 30	10 ～ 29	-
-	1	10 Days	10	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	g6	Tapered Shape, Fixed	20	5 ～ 25	-	0 ～ 25	-	10	20 ～ 30	10 ～ 29	-

1
2
3
4
5
Next >>

Price List

D		Unit Price
		Taper Shape Fixed								Angle K Selectable				X Dim. Selectable				Tapered, No Step
		S0 -0.02				Sg6				Angle K Selectable				X Dim. Selectable				Tapered, No Step
		KJPMT	KJPMTH	KJPMTS	KJPMTC	KJPGMT	KJPGMTH	KJPGMTS	KJPGMTC	KJPMK	KJPMKH	KJPMKS	KJPMKC	KJPMX	KJPMXH	KJPMXS	KJPMXC	KJPMTN	KJPMTNH
Small Head	8									-	-	-	-	-	-	-	-
	10
	12
	16
	20
	25
Large Head	10L			-	-			-	-	-	-	-	-	-	-	-	-	-	-
	12L			-	-			-	-	-	-	-	-	-	-	-	-	-	-
	16L			-	-			-	-	-	-	-	-	-	-	-	-	-	-
	20L			-	-			-	-	-	-	-	-	-	-	-	-	-	-

Example of Use

Slot Pins for Inspection Components/Threaded/Tapered:Related Image

Products homepage

Basic information

Type	Slot Pin	Shape	Tapered	Tip Shape	Circular Shape
Tip Type	Threads	Shape of Stepped Section	Circular Shape

Configure

490Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- Steel
  - EN 1.1191 Equiv.
- Stainless Steel
  - EN 1.4037 Equiv.
  - EN 1.4301 Equiv.
Clear
Hardness
- 45HRC ~
- 45 ~ 50HRC
- No Hardened
Clear
Large Head/Small Head
- Large Head
- Small Head
Clear
Insertion Part S Dimension Tolerance
- 0/-0.02
- g6
Clear
Taper Shape
- Tapered Shape, Fixed
- Tapered, No Step
- X Selectable
Clear
Outer Dia. D(Ø)
8

10

12

16

20

25
Clear
B(mm)
[5-25/1mm Unit(s)]
Clear
K(°)
10

15
Clear
L(mm)
[0-25/1mm Unit(s)]
Clear
M
3

4

5

6

7

8

10

12
Clear
MS
10
Clear
P(mm)
[5-30/0.01mm Unit(s)]
Clear
S(mm)
0
[4-29/1mm Unit(s)]
Clear
X(mm)
1

2

3
Clear
Type
- KJPGMT
- KJPGMTC
- KJPGMTH
- KJPGMTS
- KJPMK
- KJPMKC
- KJPMKH
- KJPMKS
- KJPMT
- KJPMTC
- KJPMTH
- KJPMTN
- KJPMTNH
- KJPMTS
- KJPMX
- KJPMXC
- KJPMXH
- KJPMXS
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

10 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Complementary Products

[Precision] X-Axis / Cross Roller
MISUMI Standard Price : 311.07 € Shipping Days: 7 Days
Angles - Resin
MISUMI Shipping Days: -
Rough Guide / Standard
MISUMI Shipping Days: 10 Days
Centring bushes / collar / brass
MISUMI Shipping Days: 9 Days
5 Series / Sheet Metals
MISUMI Standard Price : 1.33 € Shipping Days: Same day