Locating Pins - Shouldered - Taper Angle, DP Tolerance Selectable, Press Fit (Part Numbers)

[Features]You can freely specify dimensions of shoulder type respective parts. It is installed by press-fitting.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Save
Similar products
Product data
CAD data not available

Products homepage

Data to be displayed: 30; 45; 60

Part Number
KFHAMB20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
KFHAPB2-P[1-2/0.01]-L[2-4/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
KFHAPB3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
KFHAPB4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
KFHAPB5-P[3-6/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
KFHAPB6-P[4-7/0.01]-L[6-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
KFHAPB8-P[5-9/0.01]-L[8-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
KFHAPB10-P[7-11/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
KFHAPB12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
KFHAPB13-P[8-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
KFHAPB16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
KFHAPB20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAAB2-P[1-2/0.01]-L[2-4/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAAB3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAAB4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAAB5-P[3-6/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAAB6-P[4-7/0.01]-L[6-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAAB8-P[5-9/0.01]-L[8-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAAB10-P[7-11/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAAB12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAAB13-P[8-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAAB16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAAB20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHABB2-P[1-2/0.01]-L[2-4/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHABB3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHABB4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHABB5-P[3-6/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHABB6-P[4-7/0.01]-L[6-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHABB8-P[5-9/0.01]-L[8-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHABB10-P[7-11/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHABB12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHABB13-P[8-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHABB16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHABB20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAGB2-P[1-2/0.01]-L[2-4/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAGB3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAGB4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAGB5-P[3-6/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAGB6-P[4-7/0.01]-L[6-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAGB8-P[5-9/0.01]-L[8-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAGB10-P[7-11/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAGB12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAGB13-P[8-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAGB16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAGB20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAHB2-P[1-2/0.01]-L[2-4/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAHB3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAHB4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAHB5-P[3-6/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAHB6-P[4-7/0.01]-L[6-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAHB8-P[5-9/0.01]-L[8-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAHB10-P[7-11/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAHB12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAHB13-P[8-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAHB16-P[13-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAHB20-P[16-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAMB2-P[1-2/0.01]-L[2-4/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAMB3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAMB4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]
SKFHAMB5-P[3-6/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Surface Treatment	Heat Treatment	[D] Diameter (Mounting Side) (mm)	ISO Tolerance (Mounting Side)	ISO Tolerance (Head)	A	B	E	L	P
-	1	6 Days	10	[Steel] EN 1.2510 Equiv.	No Treatment	Directly Quenched	20	m6	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	16 ～ 20
-	1	6 Days	10	[Steel] EN 1.2510 Equiv.	No Treatment	Directly Quenched	2	p6	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	2 ～ 4	1 ～ 2
-	1	6 Days	10	[Steel] EN 1.2510 Equiv.	No Treatment	Directly Quenched	3	p6	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	3 ～ 6	2 ～ 4
-	1	6 Days	10	[Steel] EN 1.2510 Equiv.	No Treatment	Directly Quenched	4	p6	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	4 ～ 8	2 ～ 5
-	1	6 Days	10	[Steel] EN 1.2510 Equiv.	No Treatment	Directly Quenched	5	p6	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	5 ～ 10	3 ～ 6
-	1	6 Days	10	[Steel] EN 1.2510 Equiv.	No Treatment	Directly Quenched	6	p6	0/-0.005	15 ～ 60	2 ～ 12	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Steel] EN 1.2510 Equiv.	No Treatment	Directly Quenched	8	p6	0/-0.005	15 ～ 60	2 ～ 15	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Steel] EN 1.2510 Equiv.	No Treatment	Directly Quenched	10	p6	0/-0.005	15 ～ 60	3 ～ 20	0 ～ 10	10 ～ 20	7 ～ 11
-	1	6 Days	10	[Steel] EN 1.2510 Equiv.	No Treatment	Directly Quenched	12	p6	0/-0.005	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	[Steel] EN 1.2510 Equiv.	No Treatment	Directly Quenched	13	p6	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	[Steel] EN 1.2510 Equiv.	No Treatment	Directly Quenched	16	p6	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	13 ～ 16
-	1	6 Days	10	[Steel] EN 1.2510 Equiv.	No Treatment	Directly Quenched	20	p6	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	16 ～ 20
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	2	0.005/0	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	2 ～ 4	1 ～ 2
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	3	0.005/0	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	3 ～ 6	2 ～ 4
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	4	0.005/0	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	4 ～ 8	2 ～ 5
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	5	0.005/0	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	5 ～ 10	3 ～ 6
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6	0.005/0	0/-0.005	15 ～ 60	2 ～ 12	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8	0.005/0	0/-0.005	15 ～ 60	2 ～ 15	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	10	0.005/0	0/-0.005	15 ～ 60	3 ～ 20	0 ～ 10	10 ～ 20	7 ～ 11
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	12	0.005/0	0/-0.005	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	13	0.005/0	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	16	0.005/0	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	13 ～ 16
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	20	0.005/0	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	16 ～ 20
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	2	0/-0.005	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	2 ～ 4	1 ～ 2
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	3	0/-0.005	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	3 ～ 6	2 ～ 4
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	4	0/-0.005	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	4 ～ 8	2 ～ 5
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	5	0/-0.005	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	5 ～ 10	3 ～ 6
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6	0/-0.005	0/-0.005	15 ～ 60	2 ～ 12	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8	0/-0.005	0/-0.005	15 ～ 60	2 ～ 15	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	10	0/-0.005	0/-0.005	15 ～ 60	3 ～ 20	0 ～ 10	10 ～ 20	7 ～ 11
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	12	0/-0.005	0/-0.005	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	13	0/-0.005	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	16	0/-0.005	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	13 ～ 16
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	20	0/-0.005	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	16 ～ 20
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	2	g6	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	2 ～ 4	1 ～ 2
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	3	g6	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	3 ～ 6	2 ～ 4
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	4	g6	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	4 ～ 8	2 ～ 5
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	5	g6	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	5 ～ 10	3 ～ 6
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6	g6	0/-0.005	15 ～ 60	2 ～ 12	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8	g6	0/-0.005	15 ～ 60	2 ～ 15	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	10	g6	0/-0.005	15 ～ 60	3 ～ 20	0 ～ 10	10 ～ 20	7 ～ 11
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	12	g6	0/-0.005	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	13	g6	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	16	g6	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	13 ～ 16
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	20	g6	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	16 ～ 20
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	2	h7	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	2 ～ 4	1 ～ 2
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	3	h7	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	3 ～ 6	2 ～ 4
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	4	h7	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	4 ～ 8	2 ～ 5
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	5	h7	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	5 ～ 10	3 ～ 6
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	6	h7	0/-0.005	15 ～ 60	2 ～ 12	0 ～ 10	6 ～ 12	4 ～ 7
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	8	h7	0/-0.005	15 ～ 60	2 ～ 15	0 ～ 10	8 ～ 16	5 ～ 9
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	10	h7	0/-0.005	15 ～ 60	3 ～ 20	0 ～ 10	10 ～ 20	7 ～ 11
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	12	h7	0/-0.005	15 ～ 60	3 ～ 20	0 ～ 10	12 ～ 24	7 ～ 12
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	13	h7	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	13 ～ 26	8 ～ 13
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	16	h7	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	16 ～ 32	13 ～ 16
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	20	h7	0/-0.005	15 ～ 60	5 ～ 20	0 ～ 10	20 ～ 40	16 ～ 20
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	2	m6	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	2 ～ 4	1 ～ 2
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	3	m6	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	3 ～ 6	2 ～ 4
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	4	m6	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	4 ～ 8	2 ～ 5
-	1	6 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Treatment	No Treatment	5	m6	0/-0.005	15 ～ 60	2 ～ 10	0 ～ 10	5 ～ 10	3 ～ 6

Basic information

Type (Basic Shape)	Shouldered	Shape (Head, Outline View)	Round	Shape (Head, Tip View)	Tapered
Shape (Head, Mounting Method)	N/A	Type (Mounting Side)	Straight (Press-Fit)

Configure

198Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- Steel
  - EN 1.2510 Equiv.
- Stainless Steel
  - EN 1.4037 Equiv.
  - EN 1.4301 Equiv.
Clear
Surface Treatment
- No Treatment
- Hard Chrome Plating
  - Hard Chrome Plating
Clear
Heat Treatment
- No Treatment
- Directly Quenched
Clear
[D] Diameter (Mounting Side)(mm)
2

3

4

5

6

8

10

12

13

16

20
Clear
ISO Tolerance (Mounting Side)
p6

m6

h7

g6

0.005/0

0/-0.005
Clear
A
15

30

45

60
Clear
B
[2-20/0.1]
Clear
E
[0-10/0.1]
Clear
L
[2-40/1]
Clear
P
[1-20/0.01]
Clear
Type
- CKFHAAA
- CKFHAAB
- CKFHAAG
- CKFHAAH
- CKFHAAM
- CKFHAAP
- CKFHAAS
- CKFHABA
- CKFHABB
- CKFHABG
- CKFHABH
- CKFHABM
- CKFHABP
- CKFHABS
- CKFHAGA
- CKFHAGB
- CKFHAGG
- CKFHAGH
- CKFHAGM
- CKFHAGP
- CKFHAGS
- CKFHAHA
- CKFHAHB
- CKFHAHG
- CKFHAHH
- CKFHAHM
- CKFHAHP
- CKFHAHS
- CKFHAMA
- CKFHAMB
- CKFHAMG
- CKFHAMH
- CKFHAMM
- CKFHAMP
- CKFHAMS
- CKFHAPA
- CKFHAPB
- CKFHAPG
- CKFHAPH
- CKFHAPM
- CKFHAPP
- CKFHAPS
- GKFHAGG
- GKFHAGH
- GKFHAGM
- GKFHAGP
- GKFHAGS
- GKFHAHG
- GKFHAHH
- GKFHAHM
- GKFHAHP
- GKFHAHS
- GKFHAMG
- GKFHAMH
- GKFHAMM
- GKFHAMP
- GKFHAMS
- GKFHAPG
- GKFHAPH
- GKFHAPM
- GKFHAPP
- GKFHAPS
- KFHAAA
- KFHAAB
- KFHAAG
- KFHAAH
- KFHAAM
- KFHAAP
- KFHAAS
- KFHABA
- KFHABB
- KFHABG
- KFHABH
- KFHABM
- KFHABP
- KFHABS
- KFHAGA
- KFHAGB
- KFHAGG
- KFHAGH
- KFHAGM
- KFHAGP
- KFHAGS
- KFHAHA
- KFHAHB
- KFHAHG
- KFHAHH
- KFHAHM
- KFHAHP
- KFHAHS
- KFHAMA
- KFHAMB
- KFHAMG
- KFHAMH
- KFHAMM
- KFHAMP
- KFHAMS
- KFHAPA
- KFHAPB
- KFHAPG
- KFHAPH
- KFHAPM
- KFHAPP
- KFHAPS
- SKFHAAA
- SKFHAAB
- SKFHAAG
- SKFHAAH
- SKFHAAM
- SKFHAAP
- SKFHAAS
- SKFHABA
- SKFHABB
- SKFHABG
- SKFHABH
- SKFHABM
- SKFHABP
- SKFHABS
- SKFHAGA
- SKFHAGB
- SKFHAGG
- SKFHAGH
- SKFHAGM
- SKFHAGP
- SKFHAGS
- SKFHAHA
- SKFHAHB
- SKFHAHG
- SKFHAHH
- SKFHAHM
- SKFHAHP
- SKFHAHS
- SKFHAMA
- SKFHAMB
- SKFHAMG
- SKFHAMH
- SKFHAMM
- SKFHAMP
- SKFHAMS
- SKFHAPA
- SKFHAPB
- SKFHAPG
- SKFHAPH
- SKFHAPM
- SKFHAPP
- SKFHAPS
Clear
ISO Tolerance (Head)
p6

m6

h7

g6

0/-0.01

0.005/0

0/-0.005
Clear

Filter by standard shipping days

All

6 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Complementary Products

[Precision] X-Axis / Cross Roller
MISUMI Standard Price : 311.07 € Shipping Days: 7 Days
Angles - Resin
MISUMI Shipping Days: -
Centring bushes / collar / brass
MISUMI Shipping Days: 9 Days
5 Series / Sheet Metals
MISUMI Standard Price : 1.33 € Shipping Days: Same day