Înregistrați-vă
Criterii de filtrare
  • Features, Areas of Application
  • Material
    • Resin
  • [D] Diameter (Mounting Side)(mm)
  • [P] Diameter (Head)(mm)
      [3-10/0.01mm unități]
    • [L] Length (Pin)(mm)
        [8-23/1mm unități]
      • [B] Length (Head)(mm)
          [2-20/0.1mm unități]
        • Type
          • CAD
          • Est. zile de expediere
            • Toate
            • În 7 zile lucrătoare

          Locating Pin - Resin, Small Head, Tapped

          Locating Pin - Resin, Small Head, Tapped

          Cod piesă:

          S-au găsit. 4 candidați nedefiniți.
          Cantitate:

          Desen de ansamblu și tabel de specificații

          Locating Pin - Resin, Small Head, Tapped: Related Image

          ● Tapered

          ● Flat

          ● Sphere

          (Round)

          (Diamond)

          PC*
          3.00 to 4.000.5
          4.01 to 10.001

          [ ! ] When selecting Flat, refer to the C* dimensions above.
          [ ! ] The outer diameter tolerance is the result of measurement at room temperature.
          [ ! ] Relief dimensions are reference values.

          TypeHead ShapeMaterialOperating Ambient Temperature
          P ConfigurableP, L, B Configurable
          RoundDiamondRoundDiamond
          JPZSSJPZSSDFJPZSSFJPZSSDA (Tapered)
          FA (Flat)
          Q (Sphere)
          Polyacetal (Black)−45 to 95°C
          MJPZSSMJPZSSDMFPZSSMFPZSSDMC Nylon (Blue)−40 to 120°C
          JKPZSSJKPZSSDFKPZSSFKPZSSDPEEK (Natural Ivory)−50 to 250°C

          Specification Table

          Part NumberPLB
          MJPZSSQ6P5.50    
          JPZSSDA8P7.00L15B4.0
          ■P Configurable
          Part NumberP
          Ordering Code
          0.01 mm Increments
          LBmM (Coarse)(W)
          TypeHead ShapeDD Dimension Tolerance
          g6
          (Round)
          JPZSS
          MJPZSS
          JKPZSS
          (Diamond)
          JPZSSD
          MJPZSSD
          JKPZSSD
          A (Tapered)
          FA (Flat)
          Q (Sphere)
          5-0.004
          -0.012
          3.00 (4.00) to 5.0010523M2.51.2
          6-0.004
          -0.012
          4.00 to 6.0010525M31.5
          8-0.005
          -0.014
          6.00 to 8.0015636M51.8
          10-0.005
          -0.014
          7.00 to 10.0015838M52.2
          [ ! ] P dimension in ( ) is applicable to Diamond Shape
          [ ! ]Relief is machined when D dimension = P dimension.
          ■P, L, B Configurable
          Part NumberP
          Ordering Code
          0.01 mm Increments
          L
          1 mm Increments
          B
          0.1 mm Increments
          mM (Coarse)(W)
          TypeHead ShapeDD Dimension Tolerance
          g6
          (Round)
          FJPZSS
          MFPZSS
          FKPZSS
          (Diamond)
          FJPZSSD
          MFPZSSD
          FKPZSSD
          A (Tapered)
          FA (Flat)
          Q (Sphere)
          5-0.004
          -0.012
          3.00 (4.00) to 5.008 to 102.0 to 15.0 (10.0)23M2.51.2
          6-0.004
          -0.012
          4.00 to 6.008 (9) to 172.0 to 15.0 (10.0)25M31.5
          8-0.005
          -0.014
          6.00 to 8.0011 (12) to 212.0 to 20.0 (15.0)36M51.8
          10-0.005
          -0.014
          7.00 to 10.0011 (12) to 233.0 to 20.0 (15.0)38M52.2
          [ ! ] P, L, B dimensions in ( ) are applicable to Diamond Shape
          [ ! ]Relief is machined when D dimension = P dimension.

          Alterations

          Part NumberPLB(HSC)
          MJPZSSQ6 P5.50    HSC
          JPZSSDA8P7.00L15B4.0HSC
          AlterationThreaded Insert
          CodeHSC
          Spec.Adds a threaded insert on Tapped.
           D5:M2.5
           D6:M3
           D8·D10:M5
          Ordering Code HSC

          Lista codurilor de piese

          Număr de articole

          RoHS Requirements

          Features, Areas of Application

          Shape (Head, Outline View)

          Shape (Head, Tip View)

          Material

          [D] Diameter (Mounting Side)

          (mm)

          [P] Diameter (Head)

          (mm)

          [L] Length (Pin)

          (mm)

          [B] Length (Head)

          (mm)

          Cantitate minimă per comandă
          RoHS Requirements fulfilled
          Not Applicable
          Round
          Spherical
          [Resin] Polyacetal
          5
          3 ~ 5
          8 ~ 10
          2 ~ 15
          1 bucăți
          RoHS Requirements fulfilled
          Not Applicable
          Round
          Spherical
          [Resin] Polyacetal
          6
          4 ~ 6
          8 ~ 17
          2 ~ 15
          1 bucăți
          -
          -
          Round
          Spherical
          [Resin] Polyacetal
          8
          6 ~ 8
          11 ~ 21
          2 ~ 20
          1 bucăți
          RoHS Requirements fulfilled
          Not Applicable
          Round
          Spherical
          [Resin] Polyacetal
          10
          7 ~ 10
          11 ~ 23
          3 ~ 20
          1 bucăți
          Preț unitar (fără TVA)(preț unitar cu TVA incluse)
          Dată de expediere standard
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare
          -
          ( - )
          7 zile lucrătoare

          Informații detaliate

          Informații de bază

          Small head resin locating pins. Prevents scratches.

          [FY21 New Product]
          ·A tapped thread standard has been added.
          ·Use in combination with round and diamond shapes to position workpieces.

          Desen de ansamblu și specificații

          Specifications/Overview

          [ ! ] The outer diameter tolerance is the result of measurement at room temperature.