Suntem în curs de traducere a magazinului nostru în limba română!
Deoarece avem multe produse și pagini, va dura ceva timp. Între timp, catalogul nostru de produse va fi în limba engleză. Vă mulțumim pentru răbdare!
- R Size(mm)
- 1.5
- 2
- 2.5
- 3
- Flute Length (ℓ)(mm)
- 4.5
- 6
- 7.5
- 9
- Overall Length (L)(mm)
- 60
- 70
- 80
- 90
- R Precision(μm)
- Type
- Est. zile de expediere
- Toate
- În 5 zile lucrătoare
TSC series carbide ball end mill (R accuracy ±3μm)
Cod piesă:
candidați nedefiniți.Desen de ansamblu
Lista codurilor de piese
Preț unitar (fără TVA)(preț unitar cu TVA incluse) | Dată de expediere standard |
|---|
48.69 € ( 57.94 € ) | 5 zile lucrătoare |
60.48 € ( 71.97 € ) | 5 zile lucrătoare |
100.44 € ( 119.52 € ) | 5 zile lucrătoare |
66.07 € ( 78.62 € ) | 5 zile lucrătoare |
Informații detaliate
Informații de bază
[Features]
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation
-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.
Specificații și preț
Specifications
| Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Shank Diameter d |
Figure | |
| Tip R |
|||||
| 0.2 | 0.6 | 0.4 | 50 | 6 | 1 |
| 0.3 | 0.9 | 0.6 | 50 | 6 | 1 |
| 0.5 | 1.5 | 1 | 50 | 6 | 1 |
| 1 | 3 | 2 | 50 | 6 | 1 |
| 1.5 | 4.5 | 3 | 60 | 6 | 1 |
| 2 | 6 | 4 | 70 | 6 | 1 |
| 2.5 | 7.5 | 5 | 80 | 6 | 1 |
| 3 | 9 | 6 | 90 | 6 | 2 |
For Cutting Conditions, Refer to >>Click here.
Caracteristici și exemple de utilizare
More Information
● The R tolerance range within 6 μm (our measured ratio) / shank diameter, tolerance h5 standard, has been adopted. The high-quality tools with a minimal quality variation are suitable for high-precision 3-dimensional mold machining.
● The seamless shape (blade mounted in one step from the peripheral blade through to the rounded center) yields a flat and smooth blade runout surface.
● The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it realizes a high oxidation resistance temperature and high hardness.
[ ! ] As this is a highly accurate product, if Misumi Q-Value re-grinding is not conducted, then the level of precision may not be reproducible.