TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade (TSC-CR-HFEM4N8-R2)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: TSC-CR-HFEM4N8-R2
Brand: MISUMI
Price: 102.70 €
Delivery time: 5 Days
Technical Data:
Outer Diameter (D): 8 φ
R Size: 2 mm
Flute Length (ℓ): 3.5 mm
Overall Length (L): 100 mm
Shank Diameter (d): 8 mm
- TS
- High-Hardness Steel
- 4 Flutes
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-CR-HFEM4N8-R2
Part Number
|
|---|
| TSC-CR-HFEM4N8-R2 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Under Neck Diameter d1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
102.70 € | 1 | Available | 5 Days | 8 | 2 | 3.5 | 100 | 8 | 16 | 7.2 |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Under Neck Diameter d1 |
Length Under Neck ℓ1 |
Overall Length L |
Shank Diameter d |
Figure | |||||||
| Outer Diameter D |
Radius R (Selection) |
||||||||||||
| TSC-CR-HFEM4N | 3 | 0.75 | 1.2 | 2.7 | 7.5 | 60 | 6 | 1 | |||||
| 4 | 1 | 1.6 | 3.6 | 10 | 70 | 6 | 1 | ||||||
| 5 | 1.2 | 2 | 4.5 | 12 | 80 | 6 | 1 | ||||||
| 6 | 1 | 1.5 | 2.5 | 5.4 | 12 | 90 | 6 | 2 | |||||
| 8 | 1 | 2 | 3.5 | 7.2 | 16 | 100 | 8 | 2 | |||||
| 10 | 1 | 2 | 3 | 4 | 9 | 20 | 100 | 10 | 2 | ||||
| 12 | 1 | 2 | 3 | 5 | 11 | 24 | 110 | 12 | 2 | ||||
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Has a negatively sharpened radius and non-twisted short blade length to realize a high rigidity and suppress chatter, even in pocket corners.
● Includes a back-taper that enables corners to be machined without the shoulder of the peripheral blade striking side surfaces.
● Just the one bit can be used for medium-finishing through to finishing with bottom surface machining, achieving a reduction in processing time.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Stainless Steel / Cast Iron | Number of Flutes(sheet) | 4 | Model | High-Feed Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Without Torsion |
| R Precision(μm) | ±0.02 | Additional Classification | Stocked Product |
This page is TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade, part number TSC-CR-HFEM4N8-R2.
You can find the detail information about specifications and dimensions on part number TSC-CR-HFEM4N8-R2.
Configure
Basic Attributes
-
Type
- TSC-CR-HFEM4N
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TSC-CR-HFEM4N10-R1 |
| TSC-CR-HFEM4N10-R2 |
| TSC-CR-HFEM4N10-R3 |
| TSC-CR-HFEM4N12-R1 |
| TSC-CR-HFEM4N12-R2 |
| TSC-CR-HFEM4N12-R3 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Under Neck Diameter d1 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
117.62 € | 1 | Available | 5 Days | 10 | 1 | 4 | 100 | 10 | 20 | 9 | |
103.53 € | 1 | Available | 5 Days | 10 | 2 | 4 | 100 | 10 | 20 | 9 | |
114.09 € | 1 | Available | 5 Days | 10 | 3 | 4 | 100 | 10 | 20 | 9 | |
137.14 € | 1 | Available | 5 Days | 12 | 1 | 5 | 110 | 12 | 24 | 11 | |
136.56 € | 1 | Available | 5 Days | 12 | 2 | 5 | 110 | 12 | 24 | 11 | |
138.71 € | 1 | Available | 5 Days | 12 | 3 | 5 | 110 | 12 | 24 | 11 |
Tech Support
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.