TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 flutes
-The high cutting capacity makes it possible to work at a feed rate more than twice that of a standard cutter
-Long shank is ideal for milling deep cavities
-For ø7 and above, the shank diameter is thinner than the cutting diameter to avoid interference
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
- TS
- General Steel
- 4 Flutes
- S (Short)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Figure | Under Neck Diameter d1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
84.23 € | 1 | Available | 5 Days | 3 | 0.2 | 4.5 | 80 | 6 | 10 | 1 | 2.9 | |
81.76 € | 1 | Available | 5 Days | 3 | 0.5 | 4.5 | 80 | 6 | 10 | 1 | 2.9 | |
84.11 € | 1 | Available | 5 Days | 4 | 0.2 | 6 | 80 | 6 | 15 | 1 | 3.8 | |
84.11 € | 1 | Available | 5 Days | 4 | 0.5 | 6 | 80 | 6 | 15 | 1 | 3.8 | |
73.62 € | 1 | Available | 5 Days | 6 | 0.3 | 9 | 120 | 6 | 18 | 2 | 5.8 | |
91.85 € | 1 | Available | 5 Days | 6 | 0.5 | 9 | 120 | 6 | 18 | 2 | 5.8 | |
118.85 € | 1 | Available | 5 Days | 7 | 0.5 | 9 | 120 | 6 | - | 3 | - | |
113.60 € | 1 | Available | 5 Days | 7 | 1 | 9 | 120 | 6 | - | 3 | - | |
95.63 € | 1 | Available | 5 Days | 9 | 0.5 | 13 | 135 | 8 | - | 3 | - | |
95.63 € | 1 | Available | 5 Days | 9 | 1 | 13 | 135 | 8 | - | 3 | - | |
95.63 € | 1 | Available | 5 Days | 9 | 1.5 | 13 | 135 | 8 | - | 3 | - | |
110.24 € | 1 | Available | 5 Days | 11 | 0.5 | 18 | 160 | 10 | - | 3 | - | |
118.65 € | 1 | Available | 5 Days | 11 | 1 | 18 | 160 | 10 | - | 3 | - | |
118.65 € | 1 | Available | 5 Days | 11 | 1.5 | 18 | 160 | 10 | - | 3 | - | |
134.05 € | 1 | Available | 5 Days | 13 | 1 | 20 | 160 | 12 | - | 3 | - | |
134.05 € | 1 | Available | 5 Days | 13 | 1.5 | 20 | 160 | 12 | - | 3 | - | |
134.05 € | 1 | Available | 5 Days | 13 | 2 | 20 | 160 | 12 | - | 3 | - | |
342.47 € | 1 | Available | 5 Days | 17 | 1 | 25 | 180 | 16 | - | 3 | - | |
339.76 € | 1 | Available | 5 Days | 17 | 2 | 25 | 180 | 16 | - | 3 | - | |
379.13 € | 1 | Available | 5 Days | 22 | 1 | 30 | 200 | 20 | - | 3 | - | |
379.13 € | 1 | Available | 5 Days | 22 | 2 | 30 | 200 | 20 | - | 3 | - |
Loading...
Specifications
Model Number
TSC-CR-LS-HEM4S
| Outer Diameter D |
Radius R |
Flute Length ℓ |
Under Neck Diameter d1 |
Length Under Neck ℓ1 |
Overall Length L |
Shank Diameter d |
Figure | |||||
| 3 | 0.2 | 0.5 | 4.5 | 2.9 | 10 | 80 | 6 | 1 | ||||
| 4 | 0.2 | 0.5 | 6 | 3.8 | 15 | 80 | 6 | 1 | ||||
| 6 | 0.3 | 0.5 | 9 | 5.8 | 18 | 120 | 6 | 2 | ||||
| 7 | 0.5 | 1 | 9 | - | - | 120 | 6 | 3 | ||||
| 9 | 0.5 | 1 | 1.5 | 13 | - | - | 135 | 8 | 3 | |||
| 11 | 0.5 | 1 | 1.5 | 18 | - | - | 160 | 10 | 3 | |||
| 13 | 1 | 1.5 | 2 | 20 | - | - | 160 | 12 | 3 | |||
| 17 | 1 | 2 | 25 | - | - | 180 | 16 | 3 | ||||
| 22 | 1 | 2 | 30 | - | - | 200 | 20 | 3 | ||||
For Cutting Conditions, Refer to >>Click here.
More Information
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● As the cutting chip discharge rate is high, the feed speed is also increased to 2 times greater than that of standard end mills.
● The long shank model is ideal for machining deep grooves.
● Shanks of Ø 7 or more are thinner than the blade diameter, preventing interference.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| R Precision(μm) | ±0.01 | Additional Classification | Stocked Product |
Configure
Basic Attributes
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Type
- TSC-CR-LS-HEM4S
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.