Criterii de filtrare
- Single Angle (θ)(Degree)
- 2
- Outer Diameter (D)(φ)
- 1
- Flute Length (ℓ)(mm)
- 4
- Shank Diameter (d)(mm)
- 4
- Overall Length (L)(mm)
- 50
- Type
- Est. zile de expediere
- Toate
- În 5 zile lucrătoare
TSC series carbide tapered end mill, 2-flute / regular model (TSC-TEM2R1-2)
Desen de ansamblu
Informații detaliate
Informații de bază
[Features]
As the cutting edge has been machined into a sharp corner, it is also possible to machine corner edges
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
Specificații și preț
Specifications
| Model Number | Flute Length ℓ |
Large Tip Diameter D1 |
Overall Length L |
Shank Diameter d |
||
| Outer Diameter D |
Single Angle θ |
|||||
| TSC-TEM2R | 0.5 | 1° | 2 | 0.57 | 50 | 4 |
| 2° | 2 | 0.64 | 50 | 4 | ||
| 3° | 2 | 0.71 | 50 | 4 | ||
| 5° | 2 | 0.85 | 50 | 4 | ||
| 10° | 2 | 1.21 | 50 | 4 | ||
| 15° | 2 | 1.57 | 50 | 4 | ||
| 1 | 1° | 4 | 1.14 | 50 | 4 | |
| 2° | 4 | 1.28 | 50 | 4 | ||
| 3° | 4 | 1.42 | 50 | 4 | ||
| 5° | 4 | 1.70 | 50 | 4 | ||
| 6° | 4 | 1.84 | 50 | 4 | ||
| 7° | 4 | 1.98 | 50 | 4 | ||
| 10° | 4 | 2.41 | 50 | 4 | ||
| 12° | 4 | 2.70 | 50 | 4 | ||
| 15° | 3 | 2.60 | 50 | 4 | ||
| 20° | 3 | 3.18 | 50 | 4 | ||
| 30° | 2.6 | 4.00 | 50 | 4 | ||
| 1.5 | 1° | 6 | 1.71 | 50 | 4 | |
| 2° | 6 | 1.92 | 50 | 4 | ||
| 3° | 6 | 2.13 | 50 | 4 | ||
| 5° | 6 | 2.55 | 50 | 4 | ||
| 6° | 6 | 2.76 | 50 | 4 | ||
| 7° | 6 | 2.97 | 50 | 4 | ||
| 10° | 6 | 3.62 | 50 | 4 | ||
| 12° | 6 | 4.05 | 50 | 4 | ||
| 15° | 5 | 4.18 | 50 | 4 | ||
| 20° | 5 | 5.14 | 50 | 6 | ||
| 30° | 3.9 | 6.00 | 50 | 6 | ||
| 2 | 0.5° | 8 | 2.14 | 50 | 4 | |
| 1° | 8 | 2.28 | 50 | 4 | ||
| 2° | 8 | 2.56 | 50 | 4 | ||
| 3° | 8 | 2.84 | 50 | 4 | ||
| 5° | 8 | 3.40 | 50 | 4 | ||
| 6° | 8 | 3.68 | 50 | 4 | ||
| 7° | 8 | 3.96 | 50 | 4 | ||
| 10° | 8 | 4.82 | 50 | 6 | ||
| 12° | 8 | 5.40 | 50 | 6 | ||
| 15° | 7 | 5.75 | 50 | 6 | ||
| 20° | 5.5 | 6.00 | 50 | 6 | ||
| 30° | 4 | 6.62 | 50 | 6 |
| Model Number | Flute Length ℓ |
Large Tip Diameter D1 |
Overall Length L |
Shank Diameter d |
||
| Outer Diameter D |
Single Angle θ |
|||||
| TSC-TEM2R | 3 | 0.5° | 12 | 3.21 | 60 | 4 |
| 1° | 12 | 3.42 | 60 | 4 | ||
| 2° | 12 | 3.84 | 60 | 4 | ||
| 3° | 12 | 4.26 | 60 | 4 | ||
| 5° | 12 | 5.10 | 60 | 6 | ||
| 6° | 12 | 5.52 | 60 | 6 | ||
| 7° | 12 | 5.95 | 60 | 6 | ||
| 10° | 12 | 7.23 | 60 | 8 | ||
| 12° | 11 | 7.68 | 60 | 8 | ||
| 15° | 11 | 8.89 | 60 | 10 | ||
| 20° | 9 | 9.55 | 60 | 10 | ||
| 30° | 5 | 8.77 | 60 | 10 | ||
| 4 | 0.5° | 16 | 4.28 | 60 | 4 | |
| 1° | 16 | 4.56 | 60 | 6 | ||
| 2° | 16 | 5.12 | 60 | 6 | ||
| 3° | 16 | 5.68 | 60 | 6 | ||
| 5° | 16 | 6.80 | 60 | 6 | ||
| 6° | 16 | 7.36 | 60 | 8 | ||
| 7° | 16 | 7.93 | 60 | 8 | ||
| 10° | 16 | 9.64 | 60 | 10 | ||
| 15° | 14 | 11.50 | 60 | 12 | ||
| 20° | 10 | 11.28 | 60 | 12 | ||
| 30° | 6 | 10.93 | 60 | 12 | ||
| 5 | 0.5° | 20 | 5.35 | 60 | 6 | |
| 1° | 20 | 5.70 | 60 | 6 | ||
| 2° | 20 | 6.40 | 60 | 6 | ||
| 3° | 20 | 7.10 | 60 | 8 | ||
| 5° | 20 | 8.50 | 60 | 8 | ||
| 6 | 0.5° | 24 | 6.42 | 70 | 6 | |
| 1° | 24 | 6.84 | 70 | 8 | ||
| 2° | 24 | 7.68 | 70 | 8 | ||
| 3° | 24 | 8.52 | 70 | 8 | ||
| 5° | 24 | 10.20 | 70 | 10 |
For Cutting Conditions, Refer to >>Click here.
Caracteristici și exemple de utilizare
More Information
● It has a TS film-coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● The blade tip has a sharp edge allowing corner edges to also be machined.