- Pitch, Number of Threads(mm)
- 0.5
- 0.7
- 0.8
- 1
- 1.25
- 1.5
- Overall Length (L)(mm)
- 46
- 52
- 60
- 62
- 70
- 75
- Thread Length
- 9(11)
- 10
- 11
- 12
- 22
- 24
- Shank Diameter(φ)
- 4
- 5
- 5.5
- 6
- 6.2
- 7
- Length Under Neck(mm)
- 18
- 20
- 22
- 24
- 35
- 39
- Square Part Length(mm)
- 6
- 7
- 8
- Square Part Width(mm)
- 3.2
- 4
- 4.5
- 5
- 5.5
- Type
- Est. zile de expediere
- Toate
- În 5 zile lucrătoare
TiN Coated High-Speed Steel Roll Tap【5 bucăți】
Cod piesă:
candidați nedefiniți.Desen de ansamblu
Lista codurilor de piese
| Cod piesă |
|---|
Preț unitar (fără TVA)(preț unitar cu TVA incluse) | Dată de expediere standard |
|---|
57.23 € ( 68.10 € ) | 5 zile lucrătoare |
57.23 € ( 68.10 € ) | 5 zile lucrătoare |
56.10 € ( 66.76 € ) | 5 zile lucrătoare |
56.10 € ( 66.76 € ) | 5 zile lucrătoare |
61.80 € ( 73.54 € ) | 5 zile lucrătoare |
61.80 € ( 73.54 € ) | 5 zile lucrătoare |
64.14 € ( 76.33 € ) | 5 zile lucrătoare |
64.14 € ( 76.33 € ) | 5 zile lucrătoare |
93.97 € ( 111.82 € ) | 5 zile lucrătoare |
93.97 € ( 111.82 € ) | 5 zile lucrătoare |
114.99 € ( 136.84 € ) | 5 zile lucrătoare |
114.99 € ( 136.84 € ) | 5 zile lucrătoare |
Informații detaliate
Informații de bază
[Features]
-Used for tapping that produces no chips
-Suitable for a wide range of materials, from general steel to non-ferrous alloys
-Excellent abrasion resistance and chip weld resistance due to TiN coating.
Specificații și preț
Specifications
Model Number
G-ROT
1 Pack 5 Pieces Included
| Nominal M x P |
Chamfer Lcf (Selection) |
Precision | Overall Length L |
Thread Length Lc |
Length Under Neck L1 |
Shank Diameter d |
Square Part Length Lk |
Square Part Width K |
Quantity/ pack |
|
| M2 | 0.4 | 4 | RM4 | 40 | 9 | - | 3. | 5 | 2.5 | 5 Pieces |
| M3 | 0.5 | 2 4 |
RM5 | 46 | 9 | 18 | 4. | 6 | 3.2 | |
| M4 | 0.7 | RM6 | 52 | 10 | 20 | 5. | 7 | 4. | ||
| M5 | 0.8 | RM6 | 60 | 11 | 22 | 5.5 | 7 | 4.5 | ||
| M6 | 1 | RM7 | 62 | 12 | 24 | 6. | 7 | 4.5 | ||
| M8 | 1.25 | RM7 | 70 | 22 | 35 | 6.2 | 8 | 5. | ||
| M10 | 1.5 | RM7 | 75 | 24 | 39 | 7. | 8 | 5.5 | ||
[ ! ]This product is only sold in units of packs.
[ ! ]M6 or below (depth of bite 4 only) have protruding centers.
[ ! ]The pilot hole diameter for a roll tap is different from that of a cutting tap.
[ ! ]For details about roll tapping accuracy RM, refer to the technical information (>>Click here).
For Cutting Conditions, Refer to >>Click here.
Caracteristici și exemple de utilizare
More Information
● It is used as a thread forming tap that does not discharge cuttings.
● Supports a wide range of work materials ranging from general steel to non-ferrous alloys.
● The TiN coating provides excellent wear resistance and welding resistance.