Pin Hole (Part Numbers)
[Features]
· Pin holes can be used for adjusting the aperture of lasers or as a special filter.
· The pin hole has been drilled into a nickel plate, which is fixed to a ø16 mm circular aluminum plates with a thickness of 1.6 mm.
· If the pin hole diameter is larger than 1 mm and not much precision is needed in terms of the hole diameter, please use the variable type pin hole (pin hole diameters: ø0.2, ø0.4, ø1, ø1.5, ø2, ø3, ø4, and ø6 mm).
· Ideal for when attached to a pin hole holder or an adapter for pin holes.
· Pin holes can be used for adjusting the aperture of lasers or as a special filter.
· The pin hole has been drilled into a nickel plate, which is fixed to a ø16 mm circular aluminum plates with a thickness of 1.6 mm.
· If the pin hole diameter is larger than 1 mm and not much precision is needed in terms of the hole diameter, please use the variable type pin hole (pin hole diameters: ø0.2, ø0.4, ø1, ø1.5, ø2, ø3, ø4, and ø6 mm).
· Ideal for when attached to a pin hole holder or an adapter for pin holes.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
S71-400
- Product data
- CAD data not available
Basic information
| Outer Diameter(φ) | 16 | Material | Nickel/aluminum (frame) | Thickness(mm) | 1.6 |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.