• Mărci
  • Compania
  • Contact
RO
Type Code Seach | *NOT READY*
#CODE
Sugestii de cuvinte cheie
Sugestii privind numărul de piesă
Discontinued Products

Plain bearing bushes with flange / plastic (iglidur) / JFM (JFM-081014-10)

Plain bearing bushes with flange / plastic (iglidur) / JFM JFM-081014-10
  • Promotional pricing ends 31/12/2024
  • Volume Discount

IGUS

IGUS

Product Details:

Manufacturer part number: JFM-081014-10

Brand: IGUS

Price: 5.02 €

Delivery time: 3 Days


Technical Data:

Type: Flanged Type

Environment: Standard / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater / In Chemical

Inner Diameter d1: 8 mm

O.D. d2: 10 mm

Overall Length b1: 10 mm


Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

JFM-081014-10

iglidur® J | The Versatile Endurance Runner, Flange Bearing (Form F)

Product Information


High wear resistance on (almost) all shafts, very low coefficients of friction
One main advantage of iglidur® J plain bearings is the combination of a low coefficient of friction when running dry and the low stickslip tendency. With a recommended maximum surface pressure of 35 MPa, iglidur® J plain bearings are not suitable for extreme loads.
When to use it?
• For high speeds
• For highest wear resistance at low to medium pressures
• Low wear against different shafts
• Low coefficient of friction in dry operation
• Vibration dampening
• Good chemical resistance
• Best performance with soft shaft materials
• Low moisture absorption
When not to use it?
• When high pressures occur
   ►iglidur® G
   ►iglidur® W300
• When short-term temperatures occur that are higher +120 °C
   ►iglidur® G
   ►iglidur® Z
• When a cost-effective bearing for occasional movements is necessary
   ►iglidur® G
Typical application areas
• Automation
• Printing industry
• Beverage technology
• Aerospace engineering
• Clean room

Material Properties

General propertiesUnitiglidur® JTesting method
Densityg/cm31.49 
Colour yellow 
Max. moisture absorption at +23 °C/50 % r.h.% weight0.3DIN 53495
Max. water absorption% weight1.3 
Coefficient of sliding friction, dynamic, against steelμ0.06–0.18 
pv value, max. (dry)MPa · m/s0.34 
Mechanical properties
Flexural modulusMPa2,400DIN 53457
Flexural strength at +20 °CMPa73DIN 53452
Compressive strengthMPa60 
Max. recommended surface pressure (+20 °C)MPa35 
Shore-D hardness 74DIN 53505
Physical and thermal properties
Max. long-term application temperature long-term application temperature°C+90 
Max. short-term application temperature°C+120 
Min. long-term application temperature°C–50 
Heat conductivityW/m · K0.25ASTM C 177
Coefficient of thermal expansion (at +23 °C)K–1 · 10–510DIN 53752
Electrical properties
Specific contact resistanceΩcm> 1013DIN IEC 93
Surface resistanceΩ> 1012DIN 53482

Dimensions

Flange Bearing (Form F)


2) Thickness < 1 mm: chamfer = 20°
 
Chamfer in relation to the d1    
d1 [mm]:Ø 1–6Ø 6–12Ø 12–30Ø > 30
f [mm]:0.30.50.81.2


 
d1d1-d2d3b1b2Part No.
 Tolerance3) d13h13–0.14 
3.0+0.014
+0.054		4.57.53.00.75JFM-0304-03
3.04.57.54.50.75JFM-0304-045
3.04.57.53.00.75JFM-0304-05
3.0+0.020
+0.080		6.09.010.01.5JFM-0306-10
4.0+0.020
+0.068		5.59.53.00.75JFM-0405-03
4.05.59.56.00.75JFM-0405-06
5.06.010.05.00.5JFM-0506-05
5.07.011.03.01.0JFM-0507-03
5.07.011.05.01.0JFM-0507-05
6.08.012.04.01.0JFM-0608-04
6.08.012.06.01.0JFM-0608-06
6.08.012.08.01.0JFM-0608-08
6.08.012.010.01.0JFM-0608-10
6.0+0.030
+0.068		10.014.010.02.0JFM-0610-10
8.0+0.025
+0.083		10.015.03.81.0JFM-0810-038
8.010.015.05.01.0JFM-0810-05
8.010.015.06.01.0JFM-0810-06
8.010.015.07.01.0JFM-0810-07
8.010.015.08.01.0JFM-0810-08
8.010.015.09.51.0JFM-0810-09
8.010.015.010.01.0JFM-0810-10
8.010.012.510.01.0JFM-0810125-10
8.010.012.016.01.0JFM-081012-16
8.010.014.010.01.0JFM-081014-10
8.010.016.011.02.0JFM-081016-11
8.012.016.06.02.0JFM-0812-06
8.0+0.025
+0.083		12.016.09.02.0JFM-0812-09
10.012.018.05.01.0JFM-1012-05
10.012.018.07.01.0JFM-1012-07
10.012.018.09.01.0JFM-1012-09
10.012.018.010.01.0JFM-1012-10
10.012.018.012.01.0JFM-1012-12
10.012.018.015.01.0JFM-1012-15
10.012.018.017.01.0JFM-1012-17
10.012.018.018.01.0JFM-1012-18
10.012.015.03.51.0JFM-101215-035
10.014.017.514.01.0JFM-1014-14
11.0+0.032
+0.102		13.018.05.01.0JFM-1113-05
12.014.020.04.01.0JFM-1214-04
12.014.020.05.01.0JFM-1214-05
12.014.020.07.01.0JFM-1214-07
12.014.020.09.01.0JFM-1214-09
12.014.020.012.01.0JFM-1214-12
12.014.020.015.01.0JFM-1214-15
12.014.020.017.01.0JFM-1214-17
12.014.018.04.51.0JFM-121418-045
12.014.018.010.01.0JFM-121418-10
12.0+0.050
+0.160		18.024.08.03.0JFM-1218-08
12.018.024.012.03.0JFM-1218-12
12.018.022.020.03.0JFM-1218-20
14.0+0.032
+0.102		16.022.03.01.0JFM-1416-03
14.016.022.010.01.0JFM-1416-10
14.016.022.012.01.0JFM-1416-12
14.016.022.017.01.0JFM-1416-17
14.0+0.032
+0.102		18.022.020.02.0JFM-141822-20
14.018.025.024.02.0JFM-141825-24
15.017.023.04.01.0JFM-1517-04
15.017.023.05.51.0JFM-1517-055
15.017.023.09.01.0JFM-1517-09
15.017.023.012.01.0JFM-1517-12
15.017.023.017.01.0JFM-1517-17
15.0+0.050
+0.160		21.027.020.03.0JFM-1521-20
16.0+0.032
+0.102		18.024.06.01.0JFM-1618-06
16.018.024.012.01.0JFM-1618-12
16.018.024.016.01.0JFM-1618-16
16.018.024.017.01.0JFM-1618-17
16.0+0.050
+0.160		22.028.012.03.0JFM-1622-12
16.022.028.015.03.0JFM-1622-15
17.0+0.032
+0.102		19.025.09.01.0JFM-1719-09
17.019.025.021.01.0JFM-1719-21
18.020.026.04.01.0JFM-1820-04
18.020.026.012.01.0JFM-1820-12
18.020.026.017.01.0JFM-1820-17
18.020.026.022.01.0JFM-1820-22
18.021.025.012.01.0JFM-1821-12
19.022.026.023.01.0JFM-1922-23
19.022.026.036.01.0JFM-1922-36
20.0+0.040
+0.124		23.030.011.51.5JFM-2023-11
20.023.030.015.51.5JFM-2023-15.5
20.023.030.016.51.5JFM-2023-16
20.023.030.021.51.5JFM-2023-21
20.0+0.065
+0.195		26.032.015.03.0JFM-2026-15
20.026.032.020.03.0JFM-2026-20
20.026.032.025.03.0JFM-2026-25
22.0+0.040
+0.124		25.032.08.01.5JFM-222532-08
24.030.036.030.03.0JFM-2430-30
25.028.035.06.01.5JFM-2528-06
25.028.035.011.51.5JFM-2528-11
25.028.035.012.01.5JFM-2528-12
25.0+0.040
+0.124		28.035.014.51.5JFM-2528-14.5
25.028.035.021.51.5JFM-2528-21
25.028.039.05.01.5JFM-252839-05
25.028.039.07.51.5JFM-252839-075
25.0+0.065
+0.195		32.038.020.04.0JFM-2532-20
25.032.038.025.04.0JFM-2532-25
28.032.035.07.02.0JFM-283235-07
28.0+0.040
+0.124		32.039.020.02.0JFM-283239-20
30.032.040.012.01.0JFM-303240-12
30.034.042.016.02.0JFM-3034-16
30.034.042.020.02.0JFM-3034-20
30.034.042.026.02.0JFM-3034-26
30.0+0.080
+0.240		38.044.020.04.0JFM-3038-20
30.0+0.065
+0.195		38.044.030.04.0JFM-3038-30
30.038.044.036.04.0JFM-3038-36
35.0+0.050
+0.150		39.047.012.02.0JFM-3539-12
35.039.047.016.02.0JFM-3539-16
35.039.047.026.02.0JFM-3539-26
40.044.052.020.02.0JFM-4044-20
40.044.052.030.02.0JFM-4044-30
40.044.052.040.02.0JFM-4044-40
45.050.058.012.02.0JFM-4550-12
45.050.058.020.02.0JFM-4550-20
45.050.058.050.02.0JFM-4550-50
50.055.063.011.52.0JFM-5055-115
50.055.063.050.02.0JFM-5055-50
55.0+0.060
+0.180		60.068.050.02.0JFM-5560-50
60.065.073.037.02.0JFM-6065-37
60.065.073.050.02.0JFM-6065-50
65.070.078.060.02.0JFM-6570-60
70.075.083.050.02.0JFM-7075-50
90.0+0.072
+0.212		95.0103.0100.02.5JFM-9095-100
100.0105.0113.0100.02.5JFM-100105-100
110.0115.0123.0100.02.5JFM-110115-100
120.0125.0133.0100.02.5JFM-120125-100
3) After press-fit.
 
Data to be displayed
30
45
60
  1. 1
Part Number
JFM-081014-10
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSType Environment Inner Diameter d1
(mm) 		O.D. d2
(mm) 		Overall Length b1
(mm) 		Maximum Allowable PV Value Range
(N/mm2•m/s) 		Max. Allowable Velocity V
(m/s) 		Recommended Shaft Tolerance Thickness t
(mm) 		Operating Temperature Range
(°C) 		Flange Outer Diameter d3
(mm)

5.02 €

1 Available 3 Days 10Flanged TypeStandard / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater / In Chemical810100.3 to 1.01.5h91-50～9014

Loading...

  1. 1
 

Basic information

Resin Group High Performance Polymer Group Maximum Allowable PV Value(N/mm²·m/s) 0.34 Max. Allowable Surface Pressure P(N/mm2) 35
Recommended Housing Hole Tolerance H7 Lubrication Condition Unlubricated

This page is Plain bearing bushes with flange / plastic (iglidur) / JFM, part number JFM-081014-10.
You can find the detail information about specifications and dimensions on part number JFM-081014-10.

Configure

Clear all

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Environment

    • Standard
    • Foreign Object Resistant
    • Vibration Resistant
    • In Oil
    • In Water
    • In Seawater
    • In Chemical

    Clear

  • Type

    • JFM

    Clear

  • Type

    • Flanged Type

    Clear

  • Inner Diameter d1(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 11
    • 12
    • 14
    • 15
    • 16
    • 17
    • 18
    • 19
    • 20
    • 22
    • 24
    • 25
    • 28
    • 30
    • 35
    • 40
    • 45
    • 50
    • 55
    • 60
    • 70

    Clear

  • O.D. d2(mm)

    • 4.5
    • 5.5
    • 6
    • 7
    • 8
    • 10
    • 12
    • 13
    • 14
    • 16
    • 17
    • 18
    • 19
    • 20
    • 21
    • 22
    • 23
    • 25
    • 26
    • 28
    • 30
    • 32
    • 34
    • 38
    • 39
    • 44
    • 50
    • 55
    • 60
    • 65
    • 75

    Clear

  • Overall Length b1(mm)

    • 3
    • 3.5
    • 3.8
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 7
    • 7.5
    • 8
    • 9
    • 9.5
    • 10
    • 11
    • 11.5
    • 12
    • 14
    • 14.5
    • 15
    • 15.5
    • 16
    • 16.5
    • 17
    • 18
    • 20
    • 21
    • 21.5
    • 22
    • 24
    • 25
    • 26
    • 30
    • 36
    • 40
    • 50

    Clear

  • Maximum Allowable PV Value Range(N/mm2•m/s)

    • 0.3 to 1.0

    Clear

  • Max. Allowable Velocity V(m/s)

    • 1.5
    • 10

    Clear

  • Recommended Shaft Tolerance

    • h9

    Clear

  • Thickness t(mm)

    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4

    Clear

  • Flange Outer Diameter d3(mm)

    • 7.5
    • 9
    • 9.5
    • 11
    • 12
    • 12.5
    • 14
    • 15
    • 16
    • 18
    • 20
    • 22
    • 23
    • 24
    • 25
    • 26
    • 27
    • 28
    • 30
    • 32
    • 35
    • 36
    • 38
    • 39
    • 42
    • 44
    • 47
    • 52
    • 58
    • 63
    • 68
    • 73
    • 83

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • Same day
    • 2 Days or Less
    • 3 Days or Less
    • 4 Days or Less
    • 5 Days or Less

    Reset

Optional Attributes

Variation of this product

Part Number
JFM-0306-10
JFM-0405-03
JFM-0405-06
JFM-081016-11
JFM-0812-06
JFM-0812-09
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountStandard
Shipping Days
?		RoHSType Environment Inner Diameter d1
(mm) 		O.D. d2
(mm) 		Overall Length b1
(mm) 		Maximum Allowable PV Value Range
(N/mm2•m/s) 		Max. Allowable Velocity V
(m/s) 		Recommended Shaft Tolerance Thickness t
(mm) 		Operating Temperature Range
(°C) 		Flange Outer Diameter d3
(mm)

4.78 €

1 Available 4 Days 10Flanged TypeStandard / Vibration Resistant / Foreign Object Resistant / In Water / In Oil / In Seawater36100.3 to 1.01.5h9--50～909

4.64 €

1 Available Same day

Stock

10Flanged TypeStandard / Vibration Resistant / Foreign Object Resistant / In Water / In Oil / In Seawater45.530.3 to 1.01.5h9--50～909.5

4.68 €

1 Available Same day

Stock

10Flanged TypeStandard / Vibration Resistant / Foreign Object Resistant / In Water / In Oil / In Seawater45.560.3 to 1.01.5h9--50～909.5

5.06 €

1 Available 3 Days 10Flanged TypeStandard / Vibration Resistant / Foreign Object Resistant / In Water / In Oil / In Chemical / In Seawater810110.3 to 1.01.5h91-50～9016

5.26 €

1 Available 3 Days 10Flanged TypeStandard / Vibration Resistant / Foreign Object Resistant / In Water / In Oil / In Chemical / In Seawater81260.3 to 1.01.5h92-50～9016

4.60 €

1 Available 3 Days 10-Standard / Vibration Resistant / Foreign Object Resistant / In Water / In Oil / In Chemical / In Seawater8129-10-2--

Tech Support

Technical Inquiry

Metoda de plată

Plata în cont

Pre-plată

PayPal

Producție la cerere

Modificare vizualizare

Certificate

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI în întreaga lume

Rețele de socializare

Notă juridică

Copyright © MISUMI Corporation Toate drepturile rezervate.