Brass, 0.98 MPa, Threaded Type Needle Stop Valve

[Features]
• The body has a strong, cast structure, and compact thanks to its bonnet-less shape.
· The valve has a needle-like shape, allowing you to adjust the flow rate.
• Designed with an emphasis on operability, it adopts a structure with a low handle torque and good sealing properties.
• The handle has good operability, and is red colored as standard.
• By changing the grease and O-ring, it is possible to produce oxygen-free lubricant.
• If the operating temperature range is to exceed 80°C, you can change the O-ring and handle, and use it up to 125°C.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

DH-11A-R

Save
Similar products
Product data
CAD data not available

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
DH-11A-R

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Supply Side, Plumbing Thread Nominal	Control Side, Plumbing Thread Nominal	Length L (mm)	Height H (mm)
	23.69 €	1		6 Days	1/8B	1/8B	32	48

Basic information

Main Body Shape	Globe type	Body Material	EN CW617N Equiv.	Applicable Fluid	Water / Air / Oil / Gas / Chemical
Supply Side, Connection Type	Rc	Control Side, Connection Type	Rc	Handle Shape	Round-shaped handle
Body Lining	NA	Operating Temperature Range(°C)	-20::80	Operating Pressure Range(MPa)	0::0.98
Handle Dia. D(mm)	35	Operation Method	Manual Operation Type	Orifice Dia(φ mm)	5.0

This page is Brass, 0.98 MPa, Threaded Type Needle Stop Valve, part number DH-11A-R.
You can find the detail information about specifications and dimensions on part number DH-11A-R.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes