Locating pins / round / chamfered flat head / internal thread / similar to DIN 6321
· Normally only used for press-fitting, but can also be used for fixing with screws from above or below, with the exception of size 6. (This tap hole can also be used to remove press-fit pins.) External dimensions are similar to DIN6321.
[Applications]
· Cylindrical pins are used together with tolerance holes for positioning. Additionally, they can also be used as stoppers and feet.
· Chamfered dies and pins (Fig. 2) correct tolerances in the spacing between holes and use it to determine the fixed direction of the workpiece.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Locating Pins • with bore hole similar to DIN 6321, EH 22630.
Product Description
 | Cylindric locating pins for locating workpieces in toleranced holes and also to be used as stops and feet. Flattened locating pins used to overcome differences in tolerances, between holes or to position an element in one direction only. Apart from size 6 additional safety by fastening possibilities from up and down (can be used also for dismounting). The outer dimensions are similar to DIN 6321. |
Material
Drawing
Order Information
| Dimensions | Location hole | Weight | Art. No. | |||||||||||
| d1 | l1 | b | d2 | l2 | d3 | d4 | l4 | d5 | l5 | d6 | l6 | D1 | ||
| g6 | k6 | H7 | ||||||||||||
| [mm] | [mm] | [g] | ||||||||||||
| locating pin, cylindric, with bore hole – picture 1 | ||||||||||||||
| 6 | 7 | – | 4 | 6 | – | – | 4 | 2.1 | – | M 2 | – | 4 | 1.4 | 22630.02201) |
| 6 | 12 | – | 4 | 6 | – | – | 4 | 2.1 | – | M 2 | – | 4 | 2.9 | 22630.02211) |
| 8 | 10 | – | 6 | 9 | M3 | – | 6 | 2.6 | – | M2,5 | 10 | 6 | 4.2 | 22630.0222 |
| 8 | 16 | – | 6 | 9 | M3 | – | 6 | 2.6 | – | M2,5 | 10 | 6 | 6.4 | 22630.0223 |
| 10 | 10 | – | 6 | 9 | M3 | 5.0 | 6 | 2.6 | 2.6 | M2,5 | 10 | 6 | 6.1 | 22630.0224 |
| 10 | 18 | – | 6 | 9 | M3 | 5.0 | 6 | 2.6 | 2.6 | M2,5 | 10 | 6 | 10.0 | 22630.0225 |
| 12 | 10 | – | 6 | 9 | M3 | 5.0 | 6 | 2.6 | 2.6 | M2,5 | 10 | 6 | 8.0 | 22630.0226 |
| 12 | 18 | – | 6 | 9 | M3 | 5.0 | 6 | 2.6 | 2.6 | M2,5 | 10 | 6 | 15.0 | 22630.0227 |
| 16 | 13 | – | 8 | 12 | M4 | 6.5 | 8 | 3.3 | 3.1 | M 3 | 13 | 8 | 19.0 | 22630.0228 |
| 16 | 22 | – | 8 | 12 | M4 | 6.5 | 8 | 3.3 | 3.1 | M 3 | 13 | 8 | 32.0 | 22630.0229 |
| 20 | 15 | – | 12 | 18 | M6 | 10.0 | 9 | 5.2 | 5.1 | M 5 | 19 | 12 | 46.0 | 22630.0230 |
| 20 | 25 | – | 12 | 18 | M6 | 10.0 | 9 | 5.2 | 5.1 | M 5 | 19 | 12 | 60.0 | 22630.0231 |
| 25 | 15 | – | 12 | 18 | M6 | 10.0 | 9 | 5.2 | 5.1 | M 5 | 19 | 12 | 59.0 | 22630.0232 |
| 25 | 25 | – | 12 | 18 | M6 | 10.0 | 9 | 5.2 | 5.1 | M 5 | 19 | 12 | 96.0 | 22630.0233 |
| locating pin, flattened, with bore hole – picture 2 | ||||||||||||||
| 6 | 7 | 1.0 | 4 | 6 | – | – | 4 | 2.1 | – | M 2 | – | 4 | 1.0 | 22630.02401) |
| 6 | 12 | 1.0 | 4 | 6 | – | – | 4 | 2.1 | – | M 2 | – | 4 | 1.5 | 22630.02411) |
| 8 | 10 | 1.6 | 6 | 9 | M3 | – | 6 | 2.6 | – | M2,5 | 10 | 6 | 3.4 | 22630.0242 |
| 8 | 16 | 1.6 | 6 | 9 | M3 | – | 6 | 2.6 | – | M2,5 | 10 | 6 | 4.4 | 22630.0243 |
| 10 | 10 | 2.5 | 6 | 9 | M3 | 5.0 | 6 | 2.6 | 2.6 | M2,5 | 10 | 6 | 4.6 | 22630.0244 |
| 10 | 18 | 2.5 | 6 | 9 | M3 | 5.0 | 6 | 2.6 | 2.6 | M2,5 | 10 | 6 | 7.3 | 22630.0245 |
| 12 | 10 | 2.5 | 6 | 9 | M3 | 5.0 | 6 | 2.6 | 2.6 | M2,5 | 10 | 6 | 5.8 | 22630.0246 |
| 12 | 18 | 2.5 | 6 | 9 | M3 | 5.0 | 6 | 2.6 | 2.6 | M2,5 | 10 | 6 | 10.0 | 22630.0247 |
| 16 | 13 | 3.5 | 8 | 12 | M4 | 6.5 | 8 | 3.3 | 3.1 | M 3 | 13 | 8 | 14.0 | 22630.0248 |
| 16 | 22 | 3.5 | 8 | 12 | M4 | 6.5 | 8 | 3.3 | 3.1 | M 3 | 13 | 8 | 22.0 | 22630.0249 |
| 20 | 15 | 5.0 | 12 | 18 | M6 | 10.0 | 9 | 5.2 | 5.1 | M 5 | 19 | 12 | 30.0 | 22630.0250 |
| 20 | 25 | 5.0 | 12 | 18 | M6 | 10.0 | 9 | 5.2 | 5.1 | M 5 | 19 | 12 | 44.0 | 22630.0251 |
| 25 | 15 | 5.0 | 12 | 18 | M6 | 10.0 | 9 | 5.2 | 5.1 | M 5 | 19 | 12 | 41.0 | 22630.0252 |
| 25 | 25 | 5.0 | 12 | 18 | M6 | 10.0 | 9 | 5.2 | 5.1 | M 5 | 19 | 12 | 62.0 | 22630.0253 |
Application Example
| Part Number | Related to |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Shape (Head, Outline View) | Shape (Head, Mounting Method) | d2 (mm) | d1 (mm) | Location hole [H7] (mm) | l1 (mm) | l2 (mm) | l4 (mm) | b (mm) | d5 (mm) | d6 | d3 | l6 (mm) | d4 (mm) | l5 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
9.64 € | 1 |
Same day
Stock | 10 | Round | With bolted hole | 4 | 6 | 4 | 7 | 6 | 4 | - | 2.1 | M2 | - | - | - | - | |||
9.70 € | 1 | 2 Days | 10 | Round | With bolted hole | 4 | 6 | 4 | 12 | 6 | 4 | - | 2.1 | M2 | - | - | - | - | |||
9.73 € | 1 |
Same day
Stock | 10 | Round | With bolted hole | 6 | 8 | 6 | 10 | 9 | 6 | - | 2.6 | M2,5 | M3 | 10 | - | - | |||
10.02 € | 1 | 3 Days | 10 | Round | With bolted hole | 6 | 8 | 6 | 16 | 9 | 6 | - | 2.6 | M2,5 | M3 | 10 | - | - | |||
10.33 € | 1 |
Same day
Stock | 10 | Round | With bolted hole | 6 | 10 | 6 | 10 | 9 | 6 | - | 2.6 | M2,5 | M3 | 10 | 5 | 2.6 | |||
10.56 € | 1 |
Same day
Stock | 10 | Round | With bolted hole | 6 | 10 | 6 | 18 | 9 | 6 | - | 2.6 | M2,5 | M3 | 10 | 5 | 2.6 | |||
11.02 € | 1 |
Same day
Stock | 10 | Round | With bolted hole | 6 | 12 | 6 | 10 | 9 | 6 | - | 2.6 | M2,5 | M3 | 10 | 5 | 2.6 | |||
11.78 € | 1 |
Same day
Stock | 10 | Round | With bolted hole | 6 | 12 | 6 | 18 | 9 | 6 | - | 2.6 | M2,5 | M3 | 10 | 5 | 2.6 | |||
15.08 € | 1 |
Same day
Stock | 10 | Round | With bolted hole | 8 | 16 | 8 | 13 | 12 | 8 | - | 3.3 | M3 | M4 | 13 | 6.5 | 3.1 | |||
15.37 € | 1 |
Same day
Stock | 10 | Round | With bolted hole | 8 | 16 | 8 | 22 | 12 | 8 | - | 3.3 | M3 | M4 | 13 | 6.5 | 3.1 | |||
17.06 € | 1 | 3 Days | 10 | Round | With bolted hole | 12 | 20 | 12 | 15 | 18 | 9 | - | 5.2 | M5 | M6 | 19 | 10 | 5.1 | |||
17.64 € | 1 |
Same day
Stock | 10 | Round | With bolted hole | 12 | 20 | 12 | 25 | 18 | 9 | - | 5.2 | M5 | M6 | 19 | 10 | 5.1 | |||
18.73 € | 1 |
Same day
Stock | 10 | Round | With bolted hole | 12 | 25 | 12 | 15 | 18 | 9 | - | 5.2 | M5 | M6 | 19 | 10 | 5.1 | |||
20.59 € | 1 |
Same day
Stock | 10 | Round | With bolted hole | 12 | 25 | 12 | 25 | 18 | 9 | - | 5.2 | M5 | M6 | 19 | 10 | 5.1 | |||
13.50 € | 1 |
Same day
Stock | 10 | Diamond | Flathead Slot | 4 | 6 | 4 | 7 | 6 | 4 | 1 | 2.1 | M2 | - | - | - | - | |||
20.71 € | 1 | 5 Days | 10 | Diamond | Flathead Slot | 4 | 6 | 4 | 12 | 6 | 4 | 1 | 2.1 | M2 | - | - | - | - | |||
15.66 € | 1 |
Same day
Stock | 10 | Diamond | Flathead Slot | 6 | 8 | 6 | 10 | 9 | 6 | 1.6 | 2.6 | M2,5 | M3 | 10 | - | - | |||
16.18 € | 1 |
Same day
Stock | 10 | Diamond | Flathead Slot | 6 | 8 | 6 | 16 | 9 | 6 | 1.6 | 2.6 | M2,5 | M3 | 10 | - | - | |||
16.18 € | 1 |
Same day
Stock | 10 | Diamond | Flathead Slot | 6 | 10 | 6 | 10 | 9 | 6 | 2.5 | 2.6 | M2,5 | M3 | 10 | 5 | 2.6 | |||
16.92 € | 1 |
Same day
Stock | 10 | Diamond | Flathead Slot | 6 | 10 | 6 | 18 | 9 | 6 | 2.5 | 2.6 | M2,5 | M3 | 10 | 5 | 2.6 | |||
16.88 € | 1 |
Same day
Stock | 10 | Diamond | Flathead Slot | 6 | 12 | 6 | 10 | 9 | 6 | 2.5 | 2.6 | M2,5 | M3 | 10 | 5 | 2.6 | |||
17.44 € | 1 |
Same day
Stock | 10 | Diamond | Flathead Slot | 6 | 12 | 6 | 18 | 9 | 6 | 2.5 | 2.6 | M2,5 | M3 | 10 | 5 | 2.6 | |||
21.52 € | 1 |
Same day
Stock | 10 | Diamond | Flathead Slot | 8 | 16 | 8 | 13 | 12 | 8 | 3.5 | 3.3 | M3 | M4 | 13 | 6.5 | 3.1 | |||
22.79 € | 1 |
Same day
Stock | 10 | Diamond | Flathead Slot | 8 | 16 | 8 | 22 | 12 | 8 | 3.5 | 3.3 | M3 | M4 | 13 | 6.5 | 3.1 | |||
24.41 € | 1 | 3 Days | 10 | Diamond | Flathead Slot | 12 | 20 | 12 | 15 | 18 | 9 | 5 | 5.2 | M5 | M6 | 19 | 10 | 5.1 | |||
25.29 € | 1 |
Same day
Stock | 10 | Diamond | Flathead Slot | 12 | 20 | 12 | 25 | 18 | 9 | 5 | 5.2 | M5 | M6 | 19 | 10 | 5.1 | |||
24.82 € | 1 | 3 Days | 10 | Diamond | Flathead Slot | 12 | 25 | 12 | 15 | 18 | 9 | 5 | 5.2 | M5 | M6 | 19 | 10 | 5.1 | |||
28.76 € | 1 | 3 Days | 10 | Diamond | Flathead Slot | 12 | 25 | 12 | 25 | 18 | 9 | 5 | 5.2 | M5 | M6 | 19 | 10 | 5.1 |
Loading...
Basic information
| Type (Basic Shape) | Large Head | Shape (Head, Tip View) | Tapered | Type (Mounting Side) | Straight(Press Fit) |
|---|---|---|---|---|---|
| Material | Steel | Material (Steel) | EN 1.2510 Equiv. | Surface Treatment | Triiron Film |
| Heat Treatment | Carburized | ISO Tolerance (Mounting Side) | k6 | ISO Tolerance (Head) | g6 |
| Conflict Minerals free | yes | REACH compliant | yes |
Configure
Stock
-
- Show only stock items
Basic Attributes
-
Shape (Head, Outline View)
-
Round -
Diamond
-
-
Shape (Head, Mounting Method)
-
With bolted hole -
Flathead Slot
-
-
d2(mm)
-
d1(mm)
-
Location hole [H7](mm)
-
l1(mm)
-
l2(mm)
-
l4(mm)
- 4
- 6
- 8
- 9
-
b(mm)
-
d5(mm)
- 2.1
- 2.6
- 3.3
- 5.2
-
d6
- M2
- M2,5
- M3
- M5
-
d3
-
l6(mm)
- 10
- 13
- 19
-
d4(mm)
- 5
- 6.5
- 10
-
l5(mm)
- 2.6
- 3.1
- 5.1
-
Type
- 22630
-
Filter by CAD data type
- 3D
Filter by standard shipping days
-
- All
- Same day
- 2 Days or Less
- 3 Days or Less
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.