Sash Guide 40 (Upper)
[Applications]
· Upper sash guide, dedicated for 40 series. Use for making sliding doors.
· For t5 resin plate.
[Cautions]
· The cut surface is not anodized.
· Use the two provided fasteners (part number: FA40) when less than 200 mm, then add 1 fastener for every 200 mm pitch above 200 mm.
· Upper sash guide, dedicated for 40 series. Use for making sliding doors.
· For t5 resin plate.
[Cautions]
· The cut surface is not anodized.
· Use the two provided fasteners (part number: FA40) when less than 200 mm, then add 1 fastener for every 200 mm pitch above 200 mm.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Basic information
| Application | For Sliding Door | Material | Aluminum | Material | EN AW-6063-T5 Equiv. |
|---|---|---|---|---|---|
| Accessory | FA40 ( Fasteners) | Surface Treatment | Clear Anodized Aluminum | Width(mm) | 15.5 |
| Height(mm) | 16.4 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.