Pagina principală MISUMI
Automation Components
Pneumatic Components
Cylinders, Rotary Actuators
Clamp Cylinders
MK-Z Rotary Clamp Cylinder, Standard w / Auto Switch Mounting Grooves

Criterii de filtrare

Cylinder Diameter(Ø)
- 12
- 16
- 20
- 32
Stroke(mm)
- 10
- 20
- 30
Rod Tip Shape
Female Thread
Others
Others
Support Type
Rod Side Flange
Body options
- No (Standard)
- With Arm
Max. Pressure(MPa)
- 1
Clamping Force(kN)
The above value indicates the theoretical thrust measured when the 0.5MPa pressure is applied. For details, see the technical data provided by the relevant manufacturer.
- 0.04
- 0.042
- 0.075
- 0.1
- 0.302
Rotating Direction
- Right
- Left Hand
Auto Switch
Lead Wire Length(m)
- 0.5
- 0.5 (M8 3-pin plug connector)
Number of Switches
- 2
Port Screw Type
- G
- M thread
Made to order specifications
- None
Type
- MK
CAD
- 2D
- 3D
Est. zile de expediere
- Toate
- În 6 zile lucrătoare
- În 26 zile lucrătoare

SMC

MK-Z Rotary Clamp Cylinder, Standard w / Auto Switch Mounting Grooves

Pagina anterioară

Pagina următoare

Catalog

Cod piesă:

S-au găsit. 11 candidați nedefiniți.

Informații despre produs
Lista codurilor de piese
Informații detaliate
Catalog

Informații despre produs

Rotary Clamp Cylinder, Standard Type, MK Series Details

Rotary Clamp Cylinder, Standard Type, MK Series: product images

Rotary Clamp Cylinder, Standard Type, MK Series Specifications

Bore size (mm)	12	16	20	25	32	40	50	63
Action	Double acting type
Rotary angle ^{Note 1)}	90° ±10°
Rotary direction ^{Note 2)}	Left, right
Rotary stroke (mm)	7.5		9.5		15		19
Clamp stroke (mm)	10, 20, 30				10, 20, 30, 50
Theoretical clamping force (N) ^{Note 3)}	40	75	100	185	300	525	825	1,400
Applicable fluids	Air
Proof pressure	1.5 MPa
Operating pressure range	0.1 to 1 MPa							0.1 to 0.6 MPa ^{Note 4)}
Ambient and fluid temperature	Without auto switch: -10 to 70°C (no freezing) With auto switch: -10 to 60°C (no freezing)
Lubrication	Non-lube
Piping port size	M5 × 0.8				Rc 1/8, NPT1/8 G1/8		Rc1/4, NPT1/4 G1/4
Mounting	Through-hole / Both ends tapped common, head flange
Cushion	Rubber bumper
Stroke length tolerance	+0.6 -0.4
Piston speed ^{Note 5)}	50 to 200 mm/s
Non-rotating accuracy (clamp part) ^{Note 1)}	±1.4°	±1.2°			±0.9°		±0.7°

*Note 1) Refer to the rotary angle diagram.
*Note 2) Direction of rotation viewed from the rod end when the piston rod is retracted.
*Note 3) Indicates the clamping force at a pressure of 0.5 MPa.
*Note 4) When using within a pressure range from 0.61 to 1 MPa, use the -X2071.
*Note 5) Be sure to connect a speed controller to the cylinder, and adjust the cylinder speed so that it is within the range of 50 to 200 mm/s. Make sure the valve is in the fully closed position and then gradually open the valve to adjust the speed of the speed controller.

Rotary angle diagram

Model Number Notation

Model number example

Individual Made-to-Order Specifications

Indicator symbol	Specifications/contents
-X2071	Maximum operating pressure: 1.0 MPa specification
-X2094	Overall length is the same as for the MK2 Series
-X2172	Head side with spigot
-X2177	Head flange dimensions are equivalent to the dimensions of the pre-existing MK, MK2 Series
-X2997	Rotary angle: 60° specification

Made to order specifications

Indicator symbol	Specifications/contents
-XB6	Heat-resistant cylinder (-10 to 150°C) without auto switch only ^{Note 1)}
-XC22	Seal type: fluororubber ^{Note 2)}

*Note 1) Except ø12 (diameter 12 mm), ø16 (diameter 16 mm).
*Note 2) The damper is a standard product.

Structural Drawings

Rotary Clamp Cylinder, Standard Type, MK Series: structural drawings

Component Parts

Number	Part name	Materials	Additional notes
1	Cylinder tube	Aluminum alloy	Hard anodized
2	Rod cover	Aluminum alloy	Hard anodized
3	Piston	Aluminum alloy	-
4	Magnet holder	Aluminum alloy	-
5	Piston rod	Stainless steel	ø12 to 25 (diameter 12 to 25 mm), nitriding
5	Piston rod	Carbon steel	ø32 to 63 (diameter 32 to 63 mm) heat treated, nickel plated
6	Bushing	Copper bearing material	Use only ø32 to 63 (diameter 32 to 63 mm)
7	Stop ring	Stainless steel	Use only ø20 to 32 (diameter 20 to 32 mm)
8	Round type R retaining ring	Carbon tool steel	Use only ø12 (diameter 12 mm), ø16 (diameter 16 mm)
9	Type C retaining ring	Carbon tool steel	Use only ø40 to 63 (diameter 40 to 63 mm)
10	Hex socket head set screw	Chrome molybdenum steel	Sharp end section 90°
11	Guide pin	Stainless steel	Nitriding
12	O-ring	NBR	-
13	Round type R retaining ring	Carbon tool steel	Except ø12 (diameter 12 mm), ø16 (diameter 16 mm)
14	Coil scraper	Phosphor bronze	Except ø12 (diameter 12 mm), ø16 (diameter 16 mm)
15	Scraper presser	Stainless steel	Except ø12 (diameter 12 mm), ø16 (diameter 16 mm)
16	Head cover	Rolled steel	Electroless nickel plated
17	Type C retaining ring	Carbon tool steel	Use only ø20 to 32 (diameter 20 to 32 mm)

Component Parts

Number	Part name	Materials	Additional notes
18	Bumper	Urethane	-
19	Bumper B	Urethane	Use only ø12 (diameter 12 mm), ø16 (diameter 16 mm)
20	Magnet	-	-
21	Wear ring	Resin	Except ø12 (diameter 12 mm), ø16 (diameter 16 mm)
22	Rod seal	NBR	-
23	Piston seal	NBR	-
24	Gasket	NBR	-
25	O-ring	NBR	Use only ø20 to 32 (diameter 20 to 32 mm)
26	Arm	Rolled steel	-
27	Hex socket head cap screw	Chrome molybdenum steel	-
28	Spring washer	Hard steel	-
29	Clamp bolt	Chrome molybdenum steel	-
30	Hex nut	Rolled steel	-
31	Flange	Rolled steel	Rod flange is not compatible with the head flange
32	Hex socket head cap screw	Chrome molybdenum steel	Quantity	ø12 (diameter 12 mm), ø16 (diameter 16 mm), ø32 to 40 (diameter 32 to 40 mm): 4 pcs.
32	Hex socket head cap screw	Chrome molybdenum steel	Quantity	ø20 (diameter 20 mm), ø25 (diameter 25 mm): 2 pcs.

Replacement Parts / Seal Kit

Bore size (mm)	ø12 (diameter 12 mm)	ø16 (diameter 16 mm)	ø20 (diameter 20 mm)	ø25 (diameter 25 mm)	ø32 (diameter 32 mm)	ø40 (diameter 40 mm)	ø50 (diameter 50 mm)	ø63 (diameter 63 mm)
Order number	CQSB12-PS	CQSB16-PS	MK20Z-PS	MK25Z-PS	MK32Z-PS	MK2T40-PS	MK2T50-PS	MK63Z-PS
Contents	Set of above numbers (22), (23), (24)		Set of above numbers (14), (22), (23), (24)

*The seal kit is 1 set of the numbers indicated in the table. Order the seal kit based on the order numbers for each tube bore size.
*The seal kit does not include a grease pack, so please order a grease pack separately.　Grease pack part number: GR-S-010 (10 g)

Replacement Parts / Guide Pin Kit

Bore size (mm)	ø12 (diameter 12 mm)	ø16 (diameter 16 mm)	ø20 (diameter 20 mm)	ø25 (diameter 25 mm)	ø32 (diameter 32 mm)	ø40 (diameter 40 mm)	ø50 (diameter 50 mm)	ø63 (diameter 63 mm)
Order number	MK12Z-GS	MK16Z-GS	MK20Z-GS	MK25Z-GS	MK32Z-GS	MK40Z-GS	MK50Z-GS	MK63Z-GS
Contents	A set of (10), (11), (12) listed above

*The guide pin kit is 1 set of the numbers indicated in the table. Order the seal kit based on the order numbers for each tube bore size.
*Refer to the manufacturer's operating manual for the replacement procedure for the replacement parts and seal and guide pin kits.

Rotary Clamp Cylinder, Standard Type, MK Series Dimensions

(Unit: mm)

Through hole / Both ends tapped common (basic type): dimensional drawing

Model	A	B	C	D	E	F	H	øYh9
MKB12-Z	25	32	15.5	5	M3 × 0.5	5.5	6	11 (-0.043 to 0)
MKB16-Z	29	38	20	7	M5 × 0.8	6.5	8	14 (-0.043 to 0)

Model	Rod state	Clamp stroke
		10 mm		20 mm		30 mm
		Q	R	Q	R	Q	R
MKB12-Z	Retracted	68	45.5	88	55.5	108	65.5
MKB12-Z	Extended	85.5	45.5	115.5	55.5	145.5	65.5
MKB16-Z	Retracted	68	45.5	88	55.5	108	65.5
MKB16-Z	Extended	85.5	45.5	115.5	55.5	145.5	65.5

*Note) The above figure is with the auto switch D-M9□ mounted.

Lista codurilor de piese

Număr de articole

Cod piesă

Comandă suspendată

Comandă suspendată

Comandă suspendată

Comandă suspendată

Comandă suspendată

Comandă suspendată

Cylinder Diameter

(Ø)

Stroke

(mm)

Rod Tip Shape

Support Type

Body options

Max. Pressure

(MPa)

Clamping Force

(kN)

Rotating Direction

Auto Switch

Lead Wire Length

(m)

Number of Switches

Port Screw Type

Made to order specifications

Cantitate minimă per comandă

12	10	[Others] Others	Rod Side Flange	With Arm	1	0.042	Left Hand	Without switch	-	-	M thread	None	1 bucăți
12	10	Female Thread	Rod Side Flange	No (Standard)	1	0.04	Left Hand	Without switch	-	-	M thread	None	1 bucăți
12	10	[Others] Others	Rod Side Flange	With Arm	1	0.042	Right	Without switch	-	-	M thread	None	1 bucăți
12	10	Female Thread	Rod Side Flange	No (Standard)	1	0.04	Right	Without switch	-	-	M thread	None	1 bucăți
12	20	[Others] Others	Rod Side Flange	With Arm	1	0.042	Left Hand	M9BV	0.5	2	M thread	None	1 bucăți
16	10	Female Thread	Rod Side Flange	No (Standard)	1	0.075	Left Hand	Without switch	-	-	M thread	None	1 bucăți
16	20	Female Thread	Rod Side Flange	No (Standard)	1	0.075	Left Hand	Without switch	-	-	M thread	None	1 bucăți
20	10	Female Thread	Rod Side Flange	No (Standard)	1	0.1	Right	Without switch	-	-	M thread	None	1 bucăți
20	30	[Others] Others	Rod Side Flange	With Arm	1	0.1	Left Hand	Without switch	-	-	M thread	None	1 bucăți
32	20	Female Thread	Rod Side Flange	No (Standard)	1	0.302	Left Hand	M9B	0.5 (M8 3-pin plug connector)	2	G	None	1 bucăți
32	20	Female Thread	Rod Side Flange	No (Standard)	1	0.302	Right	M9B	0.5 (M8 3-pin plug connector)	2	G	None	1 bucăți

Preț unitar (fără TVA)(preț unitar cu TVA incluse)	Dată de expediere standard

99.11 € ( 117.94 € )	6 zile lucrătoare
127.94 € ( 152.25 € )	26 zile lucrătoare
99.11 € ( 117.94 € )	6 zile lucrătoare
127.94 € ( 152.25 € )	26 zile lucrătoare
155.62 € ( 185.19 € )	6 zile lucrătoare
141.48 € ( 168.36 € )	26 zile lucrătoare
146.15 € ( 173.92 € )	26 zile lucrătoare
211.10 € ( 251.21 € )	26 zile lucrătoare
243.90 € ( 290.24 € )	26 zile lucrătoare
347.85 € ( 413.94 € )	26 zile lucrătoare
347.85 € ( 413.94 € )	26 zile lucrătoare

Informații detaliate

Informații de bază

Informații de bază

Rotary Clamp Cylinder, Standard Type MK Series with 3 times the allowable moment of inertia.
[Features]
· Auto switches can be mounted on any of the 4 surfaces to suit the installation conditions.
· Designed so that the auto switches do not project out.
· 2-color indicator solid state auto switch.
· Expanded standard stroke range.
· Overall length is shortened.
· Strong magnetic field resistant auto switch can be used.
· 2 types of clamping rotary direction available.

Atenție

Refer to the catalog for details on product specifications.
The products shown in the image are representative. CAD data is not supported for some model numbers.

Catalog

Catalog (afișare cu 2 pagini)