Înregistrați-vă
Criterii de filtrare
GANTER

Angled ball joints (71802-16-M12-C)

Angled ball joints 71802-16-M12-C

Cod piesă:

71802-16-M12-C
Ștergeți
Cantitate:

Lista codurilor de piese

Număr de articole
  • 1
    • Cod piesă
    71802-16-M12-C

    Thread d2

    Connection screw direction

    Allowable Tilt Angle α

    (deg)

    Bore d1

    Type

    		Cantitate minimă per comandă
    [M12] M12
    Right Screw
    18
    16
    C- with threaded ball shank without safety catch
    1 bucăți
    Preț unitar (fără TVA)(preț unitar cu TVA incluse)
    Dată de expediere standard
    6.50 €
    ( 7.74 € )
    7 zile lucrătoare
  • 1

    • Informații detaliate

    Informații de bază

    Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
    The angle of rotation for the type with safety catch (Types CS, BS) ist 15°, without safety catch (Types C, B) is 18°.
    For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
    To protect the angled ball point, a dust cap GN 710 can be added.
    The hexagon nut is part of the angled ball joints.
    Dust caps GN 710 have to be ordered seperately.