Înregistrați-vă
Criterii de filtrare

Eccentrical cams, radial clamping, Steel

Cod piesă:

S-au găsit. 12 candidați nedefiniți.
Cantitate:

Lista codurilor de piese

Număr de articole

Diameter d1

Type

Clamping direction

Cantitate minimă per comandă
40
GV, with ball lever, straight (serration)
L, by anti-clockwise rotation
1 bucăți
40
GV, with ball lever, straight (serration)
R, by clockwise rotation (drawn version)
1 bucăți
40
KV, with ball lever, angular (serration)
L, by anti-clockwise rotation
1 bucăți
40
KV, with ball lever, angular (serration)
R, by clockwise rotation (drawn version)
1 bucăți
40
SK, with hexagon
L, by anti-clockwise rotation
1 bucăți
40
SK, with hexagon
R, by clockwise rotation (drawn version)
1 bucăți
50
GV, with ball lever, straight (serration)
L, by anti-clockwise rotation
1 bucăți
50
GV, with ball lever, straight (serration)
R, by clockwise rotation (drawn version)
1 bucăți
50
KV, with ball lever, angular (serration)
L, by anti-clockwise rotation
1 bucăți
50
KV, with ball lever, angular (serration)
R, by clockwise rotation (drawn version)
1 bucăți
50
SK, with hexagon
L, by anti-clockwise rotation
1 bucăți
50
SK, with hexagon
R, by clockwise rotation (drawn version)
1 bucăți
Preț unitar (fără TVA)(preț unitar cu TVA incluse)
Dată de expediere standard
80.28 €
( 95.53 € )
7 zile lucrătoare
80.28 €
( 95.53 € )
7 zile lucrătoare
80.28 €
( 95.53 € )
7 zile lucrătoare
80.28 €
( 95.53 € )
7 zile lucrătoare
54.70 €
( 65.09 € )
7 zile lucrătoare
54.70 €
( 65.09 € )
7 zile lucrătoare
81.10 €
( 96.51 € )
7 zile lucrătoare
81.10 €
( 96.51 € )
7 zile lucrătoare
81.10 €
( 96.51 € )
7 zile lucrătoare
81.10 €
( 96.51 € )
7 zile lucrătoare
54.30 €
( 64.62 € )
7 zile lucrătoare
54.30 €
( 64.62 € )
7 zile lucrătoare

Informații detaliate

Informații de bază

Eccentrical cams GN 918 allow the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. The cam not only has the advantage that the clamping effect is of the same magnitude over the whole of the clamping surface (i.e. in every angular position), but also that it is self-arresting in every position.
The ball lever is linked with the eccentric cam via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the "readjustment" of the handle.
Screw bolt and washer (see technical instructions) are matched to ensure that the eccentric cam can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.