Înregistrați-vă
Confirmat
  • Length l(mm)
  • Thread d1
  • Type
  • CAD
  • Est. zile de expediere
    • Toate
    • În 7 zile lucrătoare

Stainless Steel-Knurled screws with recessed stud for loss prevention (653.2-M5-20-NI)

Cod piesă:

653.2-M5-20-NI
Ștergeți
Cantitate:
Loading...

Lista codurilor de piese

Număr de articole
Cod piesă
653.2-M5-20-NI

Length l

(mm)

Thread d1

Cantitate minimă per comandă
20
M 5
1 bucăți
Preț unitar (fără TVA)(preț unitar cu TVA incluse)
Dată de expediere standard
6.22 €
( 7.40 € )
7 zile lucrătoare

Informații detaliate

Informații de bază

Stainless Steel-Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.

Codul de piesă a fost confirmat