Înregistrați-vă
Confirmat
  • Bore d2(Ø)
  • Outside diameter d1(Ø)
  • Length l1
  • Bore code
  • Type
  • Est. zile de expediere
    • Toate
    • În 7 zile lucrătoare

Universal joints with friction bearing, Stainless Steel (808-16-B8-40-EG-NI)

Cod piesă:

808-16-B8-40-EG-NI
Ștergeți
Cantitate:
Loading...

Lista codurilor de piese

Număr de articole
Cod piesă
808-16-B8-40-EG-NI

Bore d2

(Ø)

Outside diameter d1

(Ø)

Length l1

Length l2

Bore code

Type

Cantitate minimă per comandă
8
16
40
-
B, without keyway
EG, single, friction bearing
1 bucăți
Preț unitar (fără TVA)(preț unitar cu TVA incluse)
Dată de expediere standard
109.96 €
( 130.85 € )
7 zile lucrătoare

Informații detaliate

Informații de bază

Since the moveable parts are not surface treated, i.e. not case hardened, the possibilities of application of these universal joints are much more limited compared to the ones made of standard steel. Therefore, the guide lines for the selection of universal joints with friction bearing according to the diagram may be applied at a limited extent only. Rotational speeds over 200 min may become critical.
For continuous use of the Stainless Steel-Universal joints, ample lubrication is very important. This achieved by fitting the joint with a grease filled gaiter GN 808.1.
The order example refers to universal joints with equal bores both ends d2 and s.

Codul de piesă a fost confirmat