GN 1420 / Telescopic Slides with Full Extension, Load Capacity up to 1290 N
Information

Telescopic slides GN 1420 are installed vertically and in pairs. The stroke reaches ≈ 100 % of the nominal length l
1 (full extension). The rubber stops of type E dampen the impact of the slide in the two end positions and takes on the locking function of the back stop position. This feature is noticeable through a slight resistance on opening and closing. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements.
The telescopic slides are delivered in
pairs. They can be installed on the extension on either the left or right side due to the mechanics. All mounting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present.
see also..
• Technical information on telescopic slides
• Stainless Steel-Telescopic slides GN 1460 (with full extension)
How to Order
How to order
 | 1 | l1 |
2 | Type |
3 | Identification no. |
4 | Finish |
Specification 
• Slide profile
Steel, zinc plated, blue passivated ZB
• Bearings
Roller bearing steel, hardened
• Ball cage
Steel, zinc plated
• Rubber stop
Plastic / Elastomer
• Operating temperature -20 °C to 100 °C
• RoHS compliant
On Request
• other lengths and hole spacing
• other attachment options
• with latches, partially with detach function
(back, front, or back-front)
• with locking device (front or back-front)
• other surfaces
• with support bracket
Dimensions

 | |
|
|
300 | 320 | 620 | 940 | 680 |
350 | 375 | 725 | 960 | 770 |
400 | 440 | 840 | 970 | 730 |
450 | 495 | 945 | 1100 | 830 |
500 | 550 | 1050 | 1190 | 910 |
550 | 600 | 1150 | 1180 | 900 |
600 | 650 | 1250 | 1230 | 970 |
700 | 750 | 1450 | 1290 | 1030 |
800 | 848 | 1648 | 1210 | 1020 |
900 | 950 | 1850 | 1050 | 900 |
1000 | 1050 | 2050 | 810 | 720 |
1200 | 1250 | 2450 | 640 | 570 |
Mounting Holes - Outer Slide

 |
|
300 | 192 | 224 | - | - |
350 | 192 | 224 | - | - |
400 | 224 | 256 | - | - |
450 | 288 | 320 | - | - |
500 | 320 | 352 | - | - |
550 | 352 | 384 | - | - |
600 | 416 | 448 | - | - |
700 | 448 | 480 | - | - |
800 | 384 | 416 | 672 | 704 |
900 | 416 | 448 | 768 | 800 |
1000 | 480 | 512 | 864 | 896 |
1200 | 576 | 608 | 1056 | 1088 |
Mounting Holes - Inner Slide

 |
|
300 | 150 | 280 | - | - | - |
350 | 175 | 330 | - | - | - |
400 | 200 | 380 | - | - | - |
450 | 225 | 430 | - | - | - |
500 | 250 | 480 | - | - | - |
550 | 275 | 530 | - | - | - |
600 | 300 | 580 | - | - | - |
700 | 350 | 680 | - | - | - |
800 | 271 | 522.5 | 774 | - | - |
900 | 305 | 589 | 874 | - | - |
1000 | 258 | 497 | 735.5 | 974 | - |
1200 | 251 | 482 | 712 | 943 | 1174 |
Fastening Screws
For the said loading forces F
S to be absorbed reliably in the surrounding structure, all available countersunk holes of the outer and inner slide must be used. Failure to use fastening screws reduces the specified load capacity accordingly. The following screws can be used for mounting:
|
Countersunk screw, Phillips | DIN 965 | M 5 | M 4 |
Countersunk screw, Phillips | DIN 7997 | Size 5 | Size 4 / 4.5 |