Flap With Mugen Shaft (Part Numbers)
- Volume Discount
[Features]
· Flap wheel that is easy to use and does not scratch the workpiece easily, since both sides are cap-less and metal fittings are not used.
· Tough abrasive cloth is used to achieve both grinding power and durability.
· The paper is flexible and resilient, for a tight fit with the workpiece when grinding.
· Deburring of metals and rust-removal.
· For general metal surface grinding, such as flat surfaces, curved surfaces and inner surfaces.
· Suitable for grinding in narrow parts that are difficult to reach with the tips of the flaps.
· Flap wheel that is easy to use and does not scratch the workpiece easily, since both sides are cap-less and metal fittings are not used.
· Tough abrasive cloth is used to achieve both grinding power and durability.
· The paper is flexible and resilient, for a tight fit with the workpiece when grinding.
· Deburring of metals and rust-removal.
· For general metal surface grinding, such as flat surfaces, curved surfaces and inner surfaces.
· Suitable for grinding in narrow parts that are difficult to reach with the tips of the flaps.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
MF602510
Basic information
| Application | Polishing | Type | Flap with shaft | Width(mm) | 25 |
|---|---|---|---|---|---|
| Shaft Diameter(mm) | 6 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.