Tool Setter i

Blade position with cutting tool diameter of φ0.05 mm can be detected. Machine-mounted tool length measurement instrument for high-speed spindle type machining center.

[Features]
· Developed for machining centers with ceramic spindles.
· Can also be used for non-conductive workpieces because of the internal contact system.
· Uses scratch-resistant ceramic for the cutting edge detection part. High-luminosity LED (blue) notifies the user of position detection.
· A magnet is attached to the bottom to support both vertical and horizontal use.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

I-50

Product specification
Part Numbers

Data to be displayed: 30; 45; 60

Part Number
I-50

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?
	640.77 €	1		11 Days

Basic information

Product Category	Measuring equipment	Main Body Dimensions(mm)	φ40×50	Main Body Dimension Tolerance(mm)	0～+0.005
Mass(g)	200	Applicable Product	For Small Diameter Drills / End Mills	Method	Internal contact type
Measured pressure	0.2N	Repeat accuracy	±0.001mm	Battery (included)	Silver Oxide Battery SR-44 x 2
Minimum Width of Measurement Tool	φ0.05-φ6 mm supported	Sensor Plate	Alumina Oxide Ceramic	Stroke(mm)	1.5
Magnetization force	6N	LED	High Luminosity, Blue	Contact Pressure	0.2N
Note	Use the NS Tool Setter M-50 for cutting tools that are larger than the area of the measuring surface (φ6).